Opens in a new tab

Home » Gate Driver ICs, Integrated Circuits ICs » LTC4367HMS8#TRPBF

LTC4367HMS8#TRPBF

100V OV/UV/reverse protector, 70µA IQ, MSOP-8, AEC-Q100

3200

Effective Inventory

Image for reference only

Manufacturer Part:

LTC4367HMS8#TRPBF

Package:

8-MSOP (3.0 x 3.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTC4367HMS8#TRPBF is an Analog Devices 100V overvoltage, undervoltage, and reverse supply protection controller controlling back-to-back N-channel MOSFETs. 2.5V-60V operating range, 70µA IQ, AEC-Q100 qualified. Packaged in 8-MSOP, -40°C to +125°C.

Key Specifications

Operating Voltage 2.5 V to 60 V
Withstand Voltage -40 V to +100 V
IQ 70 µA operating
Shutdown IQ 5 µA
Turn-On Delay 32 ms (blocks 50/60Hz AC)
Package 8-MSOP (HMS8)

Features

  • 100V overvoltage protection
  • -40V reverse supply protection
  • Adjustable UV and OV thresholds
  • Controls back-to-back N-CH MOSFETs
  • 32ms turn-on delay blocks 50/60Hz AC
  • AEC-Q100 automotive qualified

Applications

  • Automotive load dump protection
  • Industrial automation
  • Portable instrumentation
  • Network equipment power protection
Product Introduction: LTC4367HMS8#TRPBF Product Introduction

The LTC4367HMS8#TRPBF is an Analog Devices (formerly Linear Technology) 100V overvoltage, undervoltage, and reverse supply protection controller in an 8-MSOP package rated for -40°C to +125°C (H grade). The device protects applications where power supply input voltages may be too high, too low, or even negative by controlling the gate voltages of a pair of external back-to-back N-channel MOSFETs, ensuring the output stays within a safe operating range. The device withstands voltages between -40V and +100V while operating from 2.5V to 60V, consuming only 70µA in normal operation and 5µA in shutdown. Two comparator inputs (UV and OV) allow configuration of undervoltage and overvoltage set points using an external resistive divider. The 32ms turn-on delay debounces hot-plug connections and blocks 50Hz/60Hz AC power, preventing damage from accidental AC connection. The SHDN pin provides external enable/disable control. The FAULT output indicates when the GATE is pulled low. The AEC-Q100 qualification makes the LTC4367 suitable for automotive load dump protection. The HMS8 suffix denotes the industrial temperature MSOP-8 package, and #TRPBF indicates tape-and-reel with Pb-free finish.

Working Principle: LTC4367HMS8#TRPBF Working Principle

The LTC4367 monitors the input voltage through external resistive dividers connected to the UV and OV pins. When the input voltage is between the UV and OV thresholds, the GATE pin drives the gates of two external back-to-back N-channel MOSFETs to approximately 12V above the source, turning them on and connecting the input to the load. If the input voltage exceeds the OV threshold or drops below the UV threshold, the GATE pin is pulled low rapidly (within 1µs), turning off the MOSFETs and disconnecting the load. The back-to-back MOSFET configuration blocks current in both directions, providing reverse supply protection down to -40V even when the MOSFET body diodes would otherwise conduct. The 32ms turn-on delay after a fault ensures the input is stable before reconnecting, and inherently blocks AC power because the MOSFETs turn off during each half-cycle. The 70µA operating current flows through the VIN pin, and the SHDN pin reduces this to 5µA when pulled low.

Pin Description: LTC4367HMS8#TRPBF Pin Definition and Functions
Pin Mnemonic Description
1 SHDN Shutdown input (active low)
2 OV Overvoltage comparator input
3 UV Undervoltage comparator input
4 GATE Gate drive output for external MOSFETs
5 VIN Input supply (2.5-60V)
6 FAULT Fault status output (open-drain)
7 GND Ground
8 GND Ground
Application Scenarios: In which products and applications is LTC4367HMS8#TRPBF used
  • Automotive 12V bus load dump protection with OV threshold at 36V and UV at 8V using back-to-back MOSFETs
  • Industrial 24V power input protection against -40V reverse polarity and 100V surges without TVS
  • Portable instrumentation hot-plug power protection with 32ms debounce and AC blocking
  • Network equipment redundant supply OR-ing with adjustable UV/OV window for supply selection
Alternative Models: What chips are recommended as replacements for LTC4367HMS8#TRPBF
Model Manufacturer Key Difference
LTC4367HMS8-1#TRPBF ADI 500µs fast recovery version
LTC4365CMSTR ADI Similar, controls P-CH MOSFET
LTC4368HMS8#PBF ADI With bidirectional circuit breaker
TPL9202RUAR TI Similar OV/UV protection controller

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1