Opens in a new tab

LM63625DQDRRRQ1

Automotive 36V 2.5A buck, 23µA IQ, spread spectrum, WSON-12

4700

Effective Inventory

Image for reference only

Manufacturer Part:

LM63625DQDRRRQ1

Package:

12-WSON (DRR) (3.0 x 3.0 x 0.9 mm) wettable flanks

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM63625DQDRRRQ1 is a Texas Instruments AEC-Q100 automotive qualified 3.5V-36V, 2.5A synchronous buck converter with 23µA IQ, 2.1MHz switching, spread spectrum, and power-good. Packaged in 12-WSON (DRR) with wettable flanks, -40°C to +150°C TJ.

Key Specifications

Input Voltage 3.5 V to 36 V
Output Current 2.5 A
IQ 23 µA (non-switching)
Frequency 400 kHz / 2.1 MHz pin-selectable
Spread Spectrum Pseudo-random, CISPR 25 compatible
Package 12-WSON (3x3mm) with wettable flanks

Features

  • AEC-Q100 Grade 1 qualified
  • 3.5V to 36V input range
  • 2.5A continuous output current
  • 23µA ultra-low quiescent current
  • Pin-selectable 3.3V, 5V, or adjustable output
  • Pseudo-random spread spectrum for low EMI

Applications

  • Automotive infotainment power supply
  • ADAS and navigation systems
  • Automotive telematics
  • Industrial 24V bus POL conversion
Product Introduction: LM63625DQDRRRQ1 Product Introduction

The LM63625DQDRRRQ1 is a Texas Instruments AEC-Q100 Grade 1 qualified synchronous step-down DC-DC converter in a 12-WSON (DRR) package with wettable flanks for automated optical inspection in automotive manufacturing. The device accepts 3.5V to 36V input and delivers up to 2.5A output current with pin-selectable output voltages of 3.3V, 5V, or adjustable (1V to 20V). The 23µA typical quiescent current at no load is among the lowest for 36V automotive bucks, minimizing battery drain in always-on systems. The 2.1MHz switching frequency with pin-selectable 400kHz option enables small inductor and capacitor sizing. The pseudo-random spread spectrum modulation reduces peak EMI emissions, helping systems pass CISPR 25 automotive EMC requirements without additional shielding. The 50ns minimum on-time supports high step-down ratios at 2.1MHz. Integrated high-side (93mΩ) and low-side (61mΩ) MOSFETs eliminate external switches. The RESET (power-good) pin with 3ms release timer provides MCU power sequencing. Protection features include thermal shutdown, UVLO, cycle-by-cycle current limit, and hiccup short-circuit protection. The -40°C to +150°C junction temperature range covers the full automotive under-hood environment.

Working Principle: LM63625DQDRRRQ1 Working Principle

The LM63625-Q1 uses peak current-mode control with a fixed-frequency oscillator that can be set to 400kHz or 2.1MHz via the SYNC/MODE pin. The error amplifier compares the FB pin voltage with the internal reference (1.0V for adjustable, or fixed 3.3V/5V) and produces a COMP signal that sets the peak inductor current threshold. The high-side MOSFET turns on at the beginning of each switching cycle, ramping up the inductor current. When the current reaches the COMP threshold, the high-side MOSFET turns off and the low-side synchronous MOSFET turns on, ramping the current down. At light loads, the device enters pulse-frequency modulation (PFM) mode where switching pulses are issued only when needed, reducing the effective frequency and minimizing switching losses. The 23µA IQ is achieved by biasing the control circuits at very low currents during PFM mode. The spread spectrum modulator dithers the switching frequency by ±10% with a pseudo-random pattern, spreading the switching harmonic energy across a wider bandwidth and reducing peak EMI measurements. The 50ns minimum on-time is achieved through fast internal comparators and gate drivers.

Pin Description: LM63625DQDRRRQ1 Pin Definition and Functions
Pin Mnemonic Description
1 VIN Input supply (3.5-36V)
2 EN Precision enable input
3 VSEL Output voltage selection (3.3V/5V/ADJ)
4 FB Feedback input
5 SYNC/MODE Frequency/mode selection (400k/2.1M/FPWM)
6 RESET Power-good output (open-drain)
7 GND Ground (exposed pad)
8 SW Switch node
9 BOOT Bootstrap capacitor
10 VCC Internal 5V LDO output
Application Scenarios: In which products and applications is LM63625DQDRRRQ1 used
  • Automotive ADAS 12V-to-3.3V power with spread spectrum passing CISPR 25 Class 5 without shield cans
  • Infotainment head unit 12V-to-5V POL with 23µA IQ for always-on CAN bus standby
  • Industrial 24V-to-5V converter with RESET pin for MCU power sequencing in harsh environments
  • Automotive telematics 12V-to-3.3V with wettable flanks for automated visual inspection compliance
Alternative Models: What chips are recommended as replacements for LM63625DQDRRRQ1
Model Manufacturer Key Difference
LM63615DQDRRRQ1 TI 1.5A version, pin-compatible
LM63635DQDRRRQ1 TI 3.25A version, pin-compatible
LM53625MQWRNLTQ1 TI VQFN-16, similar function
TPS54560BDDA TI 5A, 60V, not automotive Q1

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1