Opens in a new tab

TPS2115APWR

2-input priority power mux, 2A, 2.8-5.5V, auto-switch, TSSOP-20

7639

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2115APWR

Package:

20-Pin TSSOP (6.5 x 4.4 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS2115APWR is a Texas Instruments autoswitching power multiplexer with two inputs (2.8V-5.5V), one output delivering up to 1.25A, 84mOhm typical switch resistance, adjustable current limiting, manual and auto-switching modes, and cross-conduction blocking. Packaged in TSSOP-8, -40C to +85C.

Key Specifications

Input Voltage 2.8 V to 5.5 V (both inputs)
Output Current 1.25 A (TSSOP-8)
rDS(on) 84 mOhm typ
Current Limit Range 0.63 A to 2 A (adjustable)
Operating IQ 55 uA typ
Standby IQ 0.5 uA typ
Transition Time Controlled slew rate
Package TSSOP-8

Features

  • Two-input, one-output power multiplexer
  • 84mOhm typical switch resistance (TPS2115A)
  • Reverse and cross-conduction blocking
  • 2.8V to 5.5V wide operating voltage range
  • Adjustable current limiting via RILIM
  • Controlled output voltage transition
  • Manual and auto-switching modes
  • Thermal shutdown protection

Applications

  • Battery and adapter power selection
  • USB and wall adapter switching
  • Portable device power management
  • Redundant power supply systems
Product Introduction: TPS2115APWR Product Introduction

The TPS2115APWR is a Texas Instruments automatic power multiplexer (power mux) in a 20-pin TSSOP package that seamlessly switches between two power sources (IN1 and IN2) to a single output (OUT). The device can handle up to 2A continuous current with input voltages from 2.8V to 5.5V. The automatic switchover occurs when the selected input voltage falls below an adjustable threshold, with the backup source taking over without interrupting the output. The priority input is selectable via the STATUS pin, and the switchover comparator threshold is adjustable with external resistors. The controlled slew rate limits inrush current during switchover, preventing voltage droops on the backup supply. The reverse current blocking prevents current flow from the output back into the deselected input. The device supports manual switchover via the /EN pin and provides a STATUS output indicating which input is currently selected.

Working Principle: TPS2115APWR Working Principle

The TPS2115APWR uses two back-to-back P-channel MOSFET switches (one per input) with a control circuit that ensures only one switch is on at a time. The priority input (IN1 by default) is connected to the output through the primary MOSFET. The voltage monitor continuously compares IN1 against the adjustable threshold. When IN1 drops below the threshold, the control circuit begins the switchover sequence: the primary MOSFET is turned off and the secondary MOSFET is turned on with controlled slew rate to limit inrush current. The break-before-make timing (typically 10-30 us) prevents cross-conduction between the two inputs. Reverse current blocking uses a comparator to detect current flowing from OUT back to the deselected input, immediately turning off that MOSFET. The STATUS output is driven low when IN2 is selected and high for IN1.

Pin Description: TPS2115APWR Pin Definition and Functions
Pin Mnemonic Description
1 IN1 Primary input supply
2 IN1 Primary input supply
3 GND Ground
4 GND Ground
5 EN Enable (active low)
6 STAT1 IN1 status output
7 STAT2 IN2 status output
8 MODE Priority select (IN1 or IN2 priority)
9 D0 Threshold select bit 0
10 D1 Threshold select bit 1
11 D2 Threshold select bit 2
12 D3 Threshold select bit 3
13 ILIM Current limit programming
14 VSNS Voltage sense input
15 GND Ground
16 GND Ground
17 IN2 Secondary input supply
18 IN2 Secondary input supply
19 OUT Output
20 OUT Output
Application Scenarios: In which products and applications is TPS2115APWR used
  • USB / battery dual-power system with automatic switchover to battery when USB disconnected
  • Redundant 3.3V rail selection in telecom equipment with adjustable voltage threshold
  • AC adapter / battery priority power mux in portable devices with reverse current blocking
  • Supercapacitor backup switchover with controlled slew rate limiting inrush current
Alternative Models: What chips are recommended as replacements for TPS2115APWR
Model Manufacturer Key Difference
TPS2113APWR TI Lower RDS(on), 2A, auto-switch
TPS2116APWR TI Higher current, wider VIN
MAX15301ETI+ ADI 4A, 1.5-5.5V, power mux
LTC4417IFE ADI 3-input priority power mux

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1