Opens in a new tab

TPS92830QPWRQ1

3-ch linear LED driver, 100mA/ch, AEC-Q100, TSSOP-20

13759

Effective Inventory

Image for reference only

Manufacturer Part:

TPS92830QPWRQ1

Package:

20-Pin TSSOP (6.5 x 4.4 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS92830QPWRQ1 is a Texas Instruments AEC-Q100 qualified 3-channel high-current linear LED controller with 4.5V-40V input, external N-channel MOSFET drive, 2.5% current accuracy, PWM dimming, two-stage charge pump, and comprehensive diagnostics. Packaged in TSSOP-28, -40C to +150C junction.

Key Specifications

Input Voltage 4.5 V to 40 V
Channels 3 (high-side)
Current Accuracy 2.5% (device)
PWM Dimming Internal generator + external inputs
Analog Dimming 20:1 ratio
Charge Pump Two-stage voltage tripler
Diagnostics Open/short, auto recovery, fault bus
Package TSSOP-28

Features

  • AEC-Q100 Grade 1 qualified (-40C to +125C ambient)
  • 3-channel high-side constant current drive
  • External N-channel MOSFET for high current
  • 2.5% current regulation accuracy
  • Internal precision PWM generator (2% duty cycle accuracy)
  • 20:1 analog dimming with bin resistor support
  • Adjustable MOSFET thermal derating
  • Fault bus for up to 15 devices

Applications

  • Automotive daytime running lights (DRL)
  • Automotive front and rear lighting
  • Automotive position and turn signals
  • Automotive fog and backup lights
Product Introduction: TPS92830QPWRQ1 Product Introduction

The TPS92830QPWRQ1 is a Texas Instruments AEC-Q100 qualified three-channel linear LED driver in a 20-pin TSSOP package. Each channel provides up to 100mA constant current for driving LED strings, with the current independently set by an external resistor on each channel. The device operates from a 4.5V to 40V supply, supporting 12V and 24V automotive battery systems. The linear regulation architecture provides flicker-free LED operation without electromagnetic interference (EMI) associated with switching regulators. The PWM dimming input on each channel enables independent brightness control with dimming ratios exceeding 1000:1. The device integrates comprehensive diagnostic features including LED open-circuit detection, LED short-circuit detection, and single-LED short-circuit detection for each channel. The adjustable output current derating function reduces LED current at high temperatures to prevent thermal overstress. The one-fails-all-fault output can be configured to turn off all channels when a fault is detected on any single channel, ensuring uniform illumination behavior during fault conditions.

Working Principle: TPS92830QPWRQ1 Working Principle

The TPS92830QPWRQ1 regulates LED current through each channel using an internal NPN pass transistor in series with the LED string. The current is set by an external resistor (RISET) connected to the ISET pin, where the output current equals 10 times the current through RISET. The error amplifier compares the sense voltage with the internal reference and adjusts the pass transistor gate drive to maintain constant current. PWM dimming is achieved by toggling the PWM input pin, which enables and disables the corresponding channel output with fast turn-on/off response for high-resolution dimming. The diagnostic comparators continuously monitor each channel output voltage: a voltage above the open-circuit threshold indicates an open LED, while a voltage below the short-circuit threshold indicates a shorted LED. The thermal derating function progressively reduces the reference current as junction temperature increases above the programmed threshold.

Pin Description: TPS92830QPWRQ1 Pin Definition and Functions
Pin Mnemonic Description
1 OUT1 Channel 1 output (LED cathode)
2 EN/PWM1 Channel 1 enable / PWM dimming
3 ISET1 Channel 1 current set resistor
4 DERATE Thermal derating temperature set
5 GND Ground
6 FAULT Fault output (open drain)
7 PWM2 Channel 2 PWM dimming
8 ISET2 Channel 2 current set resistor
9 OUT2 Channel 2 output
10 VIN Input supply (4.5-40V)
11 VIN Input supply
12 OUT3 Channel 3 output
13 ISET3 Channel 3 current set resistor
14 PWM3 Channel 3 PWM dimming
15-20 DIAG Diagnostic and control pins
Application Scenarios: In which products and applications is TPS92830QPWRQ1 used
  • Automotive tail light and stop light with 3 channels at 100mA each and AEC-Q100 qualification
  • Interior ambient LED lighting with independent PWM dimming per channel for color mixing
  • Automotive daytime running light with thermal derating preventing LED overstress in high-temperature engine bays
  • Industrial indicator LED array with open/short diagnostic and one-fails-all-fault reporting
Alternative Models: What chips are recommended as replacements for TPS92830QPWRQ1
Model Manufacturer Key Difference
TPS92630QPWRQ1 TI 3-ch, 150mA/ch, AEC-Q100
TPS92638QPWRQ1 TI 8-ch, 60mA/ch, AEC-Q100
BCR430UW6-7 Diodes Inc Single-ch, 100mA, SOT-26
AL5810WMP-7 Diodes Inc Single-ch, 100mA, MSOP-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1