Opens in a new tab

MJD44E3T4G

NPN power transistor, 40V, 12A, 75W, DPAK-3

4353

Effective Inventory

Image for reference only

Manufacturer Part:

MJD44E3T4G

Package:

DPAK / TO-252-3 (6.5 x 5.5 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MJD44E3T4G is an onsemi NPN power bipolar junction transistor with 80V VCEO, 5A continuous collector current, 20W power dissipation, 40-160 hFE gain, and 50MHz transition frequency. Packaged in DPAK (TO-252-3), -65C to +150C.

Key Specifications

VCEO 80 V
IC (cont) 5 A
Pd 20 W (Tc)
hFE 40-160 @ 500mA
fT 50 MHz
VCE(sat) 0.5V max @ 1A
Package DPAK (TO-252-3)

Features

  • 80V VCEO for medium-voltage switching
  • 5A continuous collector current
  • 20W power dissipation at Tc
  • 40-160 DC current gain range
  • 50MHz transition frequency
  • Low VCE(sat) for reduced conduction loss
  • AEC-Q101 qualified (MJD44E3T4G)

Applications

  • Automotive lamp drivers
  • Solenoid and relay drivers
  • Motor drive output stages
  • Power switching and regulation
Product Introduction: MJD44E3T4G Product Introduction

The MJD44E3T4G is an onsemi NPN bipolar junction power transistor in a DPAK (TO-252-3) surface-mount package. The device features a 40V collector-emitter voltage rating (VCEO), 12A continuous collector current, and 75W power dissipation at TC=25C, making it suitable for medium-power switching and linear applications. The low VCE(sat) of 0.5V maximum at IC=5A minimizes conduction losses in switching applications. The high DC current gain (hFE of 20 minimum at IC=5A) reduces base drive requirements. The DPAK package provides excellent thermal performance with the exposed collector tab enabling efficient heatsinking through the PCB copper area. The device is suitable for use in low-voltage inverters, motor drivers, and power switching circuits where NPN bipolar transistors are preferred over MOSFETs for simplicity or cost.

Working Principle: MJD44E3T4G Working Principle

The MJD44E3T4G operates as a current-controlled NPN bipolar junction transistor (BJT). A small base current (IB) controls a much larger collector current (IC) with the current gain (hFE = IC/IB) typically 20-100 at IC=5A. In the saturation region, both the base-emitter and base-collector junctions are forward-biased, and VCE drops to the saturation voltage (VCE(sat) of 0.5V max at IC=5A). The base charge storage effect causes a delay during turn-off as the stored minority carriers in the base region must be removed before the collector current falls. The Safe Operating Area (SOA) defines the permissible combinations of VCE and IC to avoid secondary breakdown and thermal destruction. The power dissipation is limited by the junction-to-case thermal resistance (1.67 C/W) and the maximum junction temperature (150C).

Pin Description: MJD44E3T4G Pin Definition and Functions
Pin Mnemonic Description
1 Base Base terminal
2 Collector (tab) Collector terminal (exposed pad)
3 Emitter Emitter terminal
Application Scenarios: In which products and applications is MJD44E3T4G used
  • Low-voltage DC motor H-bridge driver at 24V with 12A peak collector current capability
  • Linear voltage regulator pass transistor at 40V with 75W dissipation on PCB heatsink
  • Solenoid and relay driver with 0.5V VCE(sat) minimizing conduction loss at 5A
  • LED matrix constant-current sink with hFE=20 providing adequate gain at 5A
Alternative Models: What chips are recommended as replacements for MJD44E3T4G
Model Manufacturer Key Difference
MJD45E3T4G onsemi PNP complementary, -40V, -12A
MJD44H11T4G onsemi 80V, 8A, higher voltage
TIP122 onsemi Darlington, 100V, 5A, TO-220
FDD8583 onsemi N-ch MOSFET, 40V, DPAK

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1