Opens in a new tab

LM5017SDX/NOPB

100V, 600mA sync buck, COT, WSON-8, no compensation

14417

Effective Inventory

Image for reference only

Manufacturer Part:

LM5017SDX/NOPB

Package:

8-Pin WSON (4.0 x 4.0 x 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM5017SDX/NOPB is a Texas Instruments 100V, 600mA constant on-time synchronous buck regulator with integrated high-side and low-side MOSFETs, 7.5V-100V input, no loop compensation required, and adjustable switching frequency up to 1MHz. Packaged in WSON-8 (4x4mm), -40C to +125C.

Key Specifications

Input Voltage 7.5 V to 100 V
Output Current 600 mA
Output Voltage 1.225 V to 90 V (adjustable)
Switching Frequency Adjustable to 1 MHz
Reference Voltage 1.225 V (2% accuracy)
Control Method Constant On-Time (COT)
Internal Switches 100V high-side + low-side
Package WSON-8 (4 x 4 mm)

Features

  • 7.5V to 100V wide input range
  • Integrated 100V high-side and low-side MOSFETs
  • No Schottky diode required
  • Constant on-time control, no loop compensation
  • Ultra-fast transient response
  • Nearly constant operating frequency
  • Intelligent peak current limit
  • Adjustable UVLO with hysteresis
  • Remote shutdown

Applications

  • Industrial and telecom distributed power
  • Automotive 12V/24V/48V step-down
  • Isolated fly-buck auxiliary supply
  • Battery-powered high-voltage systems
Product Introduction: LM5017SDX/NOPB Product Introduction

The LM5017SDX/NOPB is a Texas Instruments 100V, 600mA synchronous step-down regulator in a WSON-8 (4x4mm) package with exposed thermal pad. The device integrates both the 100V N-channel high-side buck switch and the low-side synchronous rectifier MOSFET, eliminating the need for an external Schottky diode. The constant on-time (COT) control scheme requires no loop compensation components, provides excellent transient response, and enables very high step-down ratios. The on-time varies inversely with input voltage, resulting in nearly constant switching frequency across the input range. A high-voltage startup regulator provides bias power for internal operation and gate drivers. The intelligent peak current limit protects against overload conditions, with the off-time automatically adjusted based on the FB voltage and input voltage. The adjustable UVLO allows the input undervoltage threshold and hysteresis to be independently programmed. The device also supports Fly-Buck (isolated buck) topologies for generating isolated auxiliary outputs.

Working Principle: LM5017SDX/NOPB Working Principle

The LM5017 uses a constant on-time (COT) control scheme. The on-time is set by an external RON resistor and is inversely proportional to VIN, yielding nearly constant switching frequency. When the FB pin voltage falls below the 1.225V internal reference, the high-side MOSFET turns on for the programmed on-time, ramping up the inductor current. After the on-time, the high-side MOSFET turns off and the low-side synchronous rectifier turns on, ramping down the inductor current. The low-side MOSFET remains on until the FB voltage again falls below 1.225V (in continuous conduction) or the inductor current reaches zero (in discontinuous conduction). The intelligent current limit terminates the on-time if the peak inductor current exceeds 1.02A, and the off-time is extended based on the FB voltage to limit average output current safely during overload and short-circuit conditions.

Pin Description: LM5017SDX/NOPB Pin Definition and Functions
Pin Mnemonic Description
1 VIN Input supply (7.5-100V)
2 UVLO Undervoltage lockout programming
3 RON On-time programming resistor
4 FB Feedback voltage (1.225V ref)
5 VCC Internal 7V regulator output
6 BST Bootstrap capacitor
7 SW Switch node
8 GND Ground (connected to exposed pad)
Application Scenarios: In which products and applications is LM5017SDX/NOPB used
  • 48V telecom to 5V/600mA POL converter with COT control requiring no compensation components
  • Industrial 24V to 3.3V supply with UVLO set at 18V for brownout protection
  • Fly-Buck isolated auxiliary supply generating 12V/100mA from 48V input
  • Automotive 12V battery to 5V ECU supply with 100V transient withstand
Alternative Models: What chips are recommended as replacements for LM5017SDX/NOPB
Model Manufacturer Key Difference
LM5017SD/NOPB TI SO PowerPAD-8 package
LM5160ADNTJR TI 100V, 1A, PSR fly-buck
LM5117MH/NOPB TI 100V, external FET controller
LMR16006PDDAR TI 60V, 600mA, SOT-23-6

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1