Opens in a new tab

VNLD5300TR-E

OMNIFET III low-side driver, 2A, 300mΩ, AEC-Q100, VIPower, SO-8

6012

Effective Inventory

Image for reference only

Manufacturer Part:

VNLD5300TR-E

Package:

SO-8 (5.0 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STMicroelectronics VNLD5300TR-E is an OMNIFET III fully protected low-side driver built with VIPower technology. It delivers 2 A continuous drain current with 300 mΩ on-resistance, featuring AEC-Q100 qualification, thermal shutdown, overvoltage clamp, and current limitation for automotive load driving.

Key Specifications

Configuration Low-Side, 2 Outputs
Output Current 2 A
Current Limit 2.8 A
RDS(on) Typ 300 mΩ
Supply Voltage 4.5 V to 5.5 V
Voltage Load Max 36 V
Package SO-8
Qualification AEC-Q100

Features

  • AEC-Q100 qualified for automotive applications
  • 2 A drain current capability
  • Thermal shutdown with automatic restart
  • Current and power limitation
  • Overvoltage clamp protection
  • ESD protection
  • Very low standby current
  • Fast demagnetization of inductive loads

Applications

  • Automotive resistive and inductive load driving
  • Relay and solenoid control
  • Industrial power distribution switching
  • LED lighting control in automotive systems
Product Introduction: VNLD5300TR-E Product Introduction

The STMicroelectronics VNLD5300TR-E is a fully protected low-side power switch from the OMNIFET III family, designed for driving resistive or inductive loads with one side connected to the battery. Built using ST’s VIPower technology, the device integrates an N-channel power MOSFET with intelligent protection circuitry. With 2 A continuous drain current and 300 mΩ typical on-resistance, it efficiently switches automotive loads such as relays, solenoids, and lamps. The device features comprehensive protection including thermal shutdown with automatic restart, overvoltage clamp, current limitation, and ESD protection. AEC-Q100 qualification ensures reliable operation in automotive environments from -40°C to +150°C. Fast demagnetization capability allows safe turn-off of inductive loads.

Working Principle: VNLD5300TR-E Working Principle

The VNLD5300TR-E operates as a low-side switch where an N-channel power MOSFET connects the load between the battery supply and ground. When the input pin is driven high, the internal gate driver turns on the MOSFET, allowing current to flow through the load to ground. The VIPower technology integrates the power MOSFET with protection circuits on the same die. Overtemperature protection monitors the junction temperature and shuts down the device when it exceeds the thermal threshold, with automatic restart once the temperature drops to a safe level. Current limitation activates during overload or short-circuit conditions, capping the output current at 2.8 A to protect the device. Overvoltage clamp protects against inductive transients by limiting the drain-source voltage. The status flag pin provides diagnostic feedback when a fault is detected.

Pin Description: VNLD5300TR-E Pin Definition and Functions
Pin Name Type Function
1 OUT1 Output Drain output 1
2 GND Power Ground
3 IN Input Logic input
4 ST Output Status flag output
5 VCC Power Logic supply
6 GND Power Ground
7 OUT2 Output Drain output 2
8 GND Power Ground
Application Scenarios: In which products and applications is VNLD5300TR-E used
  • Automotive relay and solenoid driving in body electronics
  • Industrial power distribution switching
  • LED lighting control modules in vehicles
  • Resistive heater load control
Alternative Models: What chips are recommended as replacements for VNLD5300TR-E
Manufacturer Part Number Package Notes
ST VNLD5300TR SO-8 Non-automotive grade
ST VNL5300S5TR-E SO-8 Single channel variant
Infineon BTS443P TO-252 Alternative low-side switch
onsemi NCV8402 SO-8 Similar protected MOSFET

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1