Opens in a new tab

VN5R003H-E

3mΩ reverse battery protection switch, -16V to 28V, VIPower, HPAK (TO-252 6L)

4286

Effective Inventory

Image for reference only

Manufacturer Part:

VN5R003H-E

Package:

HPAK (TO-252 6L) (6.5 x 5.0 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STMicroelectronics VN5R003H-E is a 3 mΩ reverse battery protection switch built with VIPower technology. Designed for automotive electronic module protection, it automatically connects the module supply when battery polarity is correct and disconnects during reverse polarity conditions, with an ultra-low 3 mΩ on-state resistance.

Key Specifications

Function Reverse Battery Protection
RON 3 mΩ
Supply Voltage Range -16 V to 28 V (operating)
Max Supply Voltage 41 V
Control Pin IN
Package HPAK (TO-252 6L)
Grade Automotive

Features

  • Ultra-low 3 mΩ on-state resistance
  • Automatic switch-off on negative input voltage
  • ESD protection
  • Optimized electromagnetic emissions
  • Very low electromagnetic susceptibility
  • Compliant with European directive 2002/95/EC

Applications

  • Reverse battery protection for automotive ECUs
  • Electronic control unit supply protection
  • Power distribution module protection
  • Battery management system input protection
Product Introduction: VN5R003H-E Product Introduction

The STMicroelectronics VN5R003H-E is a specialized reverse battery protection device built using VIPower technology, designed to protect automotive electronic modules from damage caused by reverse battery connection. Unlike conventional Schottky diode solutions that dissipate significant power (typically 0.3-0.5 V drop), the VN5R003H-E uses an N-channel MOSFET with a control circuit to achieve an ultra-low on-state resistance of just 3 mΩ. At a typical automotive current of 10 A, this results in only 30 mV of voltage drop and 0.3 W of power dissipation, compared to 5 W with a diode solution. The device automatically turns on when the battery polarity is correct (IN voltage negative relative to Drain) and turns off when reverse polarity is detected, protecting downstream electronics.

Working Principle: VN5R003H-E Working Principle

The VN5R003H-E operates as an intelligent reverse polarity protection switch. The device has three terminals: Drain (connected to battery), Source (connected to the protected module), and IN (control). When battery polarity is correct, the IN pin voltage is negative relative to the Drain, which causes the internal driver to turn on the N-channel MOSFET, connecting the battery to the module through the ultra-low 3 mΩ channel. If the battery is connected in reverse, the Drain voltage becomes negative relative to IN, and the device automatically turns off, blocking reverse current flow. When IN is left open (floating), the device enters an OFF state and behaves like a power diode between Source and Drain, providing passive protection. The internal ESD protection and electromagnetic optimization ensure reliable operation in the harsh automotive electrical environment.

Pin Description: VN5R003H-E Pin Definition and Functions
Pin Name Type Function
1 SOURCE Output Protected module supply
2 SOURCE Output Protected module supply
3 IN Input Control input
4 DRAIN Input Battery connection
5 NC – Not connected
6 SOURCE Output Protected module supply
7 SOURCE Output Protected module supply
TAB DRAIN Input Battery connection (thermal pad)
Application Scenarios: In which products and applications is VN5R003H-E used
  • Reverse battery protection for automotive ECU modules
  • Power distribution unit input protection
  • Battery management system reverse polarity guard
  • Replacing Schottky diodes in high-current automotive rails
Alternative Models: What chips are recommended as replacements for VN5R003H-E
Manufacturer Part Number Package Notes
ST VN5R003HTR-E TO-252 6L Tape & reel version
Infineon BTN8983TA TO-263-7 Alternative reverse protection
onsemi NCP4586 DFN-8 Low RDS(on) load switch
TI TPS1H100AQPWPRQ1 HTSSOP-16 Smart high-side switch

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1