Opens in a new tab

VNH7100ASTR

Automotive H-bridge motor driver, 12A, 100mΩ/leg, VIPower M0-7, MultiSense, SO-16N

3679

Effective Inventory

Image for reference only

Manufacturer Part:

VNH7100ASTR

Package:

SO-16N (10.0 x 4.0 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STMicroelectronics VNH7100ASTR is a fully integrated automotive H-bridge motor driver from the VIPower M0-7 generation, delivering 12 A output current with 100 mΩ per leg on-resistance. It features MultiSense diagnostic output, PWM operation up to 20 kHz, and comprehensive protection in an SO-16N package.

Key Specifications

Configuration Full H-Bridge
Output Current 12 A
RDS(on) (per leg) 100 mΩ typ
Supply Voltage 4 V to 28 V
Max Supply Voltage 38 V
PWM Frequency Up to 20 kHz
Package SO-16N
Qualification AEC-Q100

Features

  • VIPower M0-7 technology for improved efficiency
  • 12 A output current with 100 mΩ per leg
  • MultiSense diagnostic: motor current, thermal, open-load detection
  • PWM operation up to 20 kHz
  • Half-bridge operation supported
  • Standby mode for ultra-low power consumption
  • Cross-conduction protection and current/power limitation
  • Output protected against short to ground and VCC

Applications

  • Automotive door lock and trunk actuators
  • Window lift and wiper motor control
  • Seat adjustment motor drivers
  • Industrial brushed DC motor control
Product Introduction: VNH7100ASTR Product Introduction

The STMicroelectronics VNH7100ASTR is a full H-bridge motor driver from the latest VIPower M0-7 generation, designed for automotive brushed DC motor control up to 12 A. The device integrates dual monolithic high-side drivers and two low-side switches using ST’s proven VIPower technology, assembled in an SO-16N package on electrically isolated leadframes. With 100 mΩ typical on-resistance per leg, the device minimizes power dissipation while delivering substantial motor drive current. A key advancement over previous generations is the MultiSense feature, which provides multiplexed analog diagnostic information including motor current feedback, output short-to-ground/short-to-VCC detection, thermal shutdown indication, and off-state open-load detection. The SEL0 pin enables addressing different diagnostic information to the microcontroller. The device supports PWM operation up to 20 kHz for precise speed control and features a standby mode for ultra-low power consumption.

Working Principle: VNH7100ASTR Working Principle

The VNH7100ASTR operates as a full H-bridge motor driver where input pins INA and INB control motor direction through a truth table, and the PWM pin enables speed control by modulating the low-side switches. The VIPower M0-7 technology integrates power MOSFETs with intelligent protection on the same die. The MultiSense pin (CS) delivers a current proportional to the motor current when the device is in normal operation, and provides diagnostic fault information including short-to-ground, short-to-battery, thermal shutdown, and open-load conditions. The SEL0 pin, combined with INA and INB states, selects which diagnostic information is multiplexed to the CS pin. Protection features include undervoltage shutdown below 4 V, overvoltage clamp for load dump protection, thermal shutdown with latched fault, cross-conduction prevention, and current limitation during short circuits. The half-bridge mode allows driving two independent unidirectional loads when full H-bridge operation is not required.

Pin Description: VNH7100ASTR Pin Definition and Functions
Pin Name Type Function
1,16 GNDA Power Low-side A source ground
2,15 OUTA Output Bridge output A
3 INA Input Clockwise direction input
4,5,12 VCC Power Supply voltage
6 INB Input Counter-clockwise input
7,10 OUTB Output Bridge output B
8,9 GNDB Power Low-side B source ground
11 PWM Input PWM speed control input
13 CS Output MultiSense analog output
14 SEL0 Input Multiplexer select for CS
Application Scenarios: In which products and applications is VNH7100ASTR used
  • Automotive door lock and trunk closure actuators
  • Power window lift motor control
  • Windshield wiper motor speed control
  • Seat adjustment and heating control motors
Alternative Models: What chips are recommended as replacements for VNH7100ASTR
Manufacturer Part Number Package Notes
ST VNH7070ASTR SO-16N Similar, lower RDS(on)
ST VNH5200ASTR-E SO-16N 8A version, lower cost
ST VNH5050ATR-E PowerSSO-36 30A version
Infineon TLE9201SG TSDSO-14 Alternative H-bridge driver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1