Opens in a new tab

MCP1700T-3302E TTVAO

250mA LDO, 3.3V fixed, 1µA Iq, 178mV dropout, SOT-89-3, AEC-Q100

8567

Effective Inventory

Image for reference only

Manufacturer Part:

MCP1700T-3302E TTVAO

Package:

SOT-89-3 (4.5 x 2.5 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Microchip MCP1700T-3302E TTVAO is a 250 mA CMOS low-dropout (LDO) linear regulator with a fixed 3.3 V output and ultra-low quiescent current of 1.0 µA. It features a low dropout voltage of 178 mV at 250 mA and supports an input voltage range of 2.0 V to 6.0 V. Housed in a SOT-89-3 package, it is designed for battery-powered and automotive applications.

Key Specifications

Output Voltage 3.3 V (fixed)
Maximum Output Current 250 mA
Input Voltage Range 2.0 V to 6.0 V
Dropout Voltage 178 mV @ 250 mA
Quiescent Current 1.0 µA (typical)
Output Voltage Accuracy ±2% (±0.5% typical)
PSRR 52 dB @ 1 kHz
Operating Temperature -40 °C to +125 °C
Package SOT-89-3

Features

  • Ultra-low quiescent current: 1.0 µA typical
  • Low dropout: 178 mV at 250 mA load
  • Stable with 1 µF ceramic output capacitor
  • High output voltage accuracy: ±0.5% typical
  • Short-circuit and over-temperature protection
  • Automotive AEC-Q100 qualified
  • No reverse current flow from output to input

Applications

  • Automotive ECU power supply
  • Battery-powered IoT and wireless sensors
  • MCU and peripheral rail regulation
  • Portable medical devices
Product Introduction: MCP1700T-3302E TTVAO Product Introduction

The Microchip MCP1700T-3302E TTVAO is a low-quiescent-current CMOS LDO regulator providing a fixed 3.3 V output at up to 250 mA. Its 1.0 µA typical ground current makes it one of the industry’s lowest Iq LDOs, ideal for always-on battery-powered applications where standby current directly impacts battery life. The 178 mV dropout voltage at full load allows operation with minimal headroom from batteries or switching pre-regulators. The device is stable with just 1 µF of output capacitance (ceramic), enabling compact PCB layouts. AEC-Q100 qualification and -40 °C to +125 °C operating range support automotive power management applications. Short-circuit current limiting and over-temperature shutdown protect the device and system from fault conditions. The SOT-89-3 package provides better thermal performance than SOT-23 due to its larger thermal pad.

Working Principle: MCP1700T-3302E TTVAO Working Principle

The MCP1700 uses a PMOS pass transistor controlled by a precision voltage reference and error amplifier. The error amplifier compares a fraction of the output voltage (via an internal resistor divider) with the internal bandgap reference (1.2 V typical). Any difference drives the gate of the PMOS pass element to maintain the output at 3.3 V. The PMOS topology is key to achieving the low 1.0 µA quiescent current — unlike bipolar LDOs that require significant base drive current, a MOSFET gate draws essentially zero DC current. The dropout voltage is the minimum VGS required to keep the PMOS in saturation, which is 178 mV at 250 mA. The device includes current limiting that folds back the output current during a short circuit, and a thermal shutdown that disables the output when junction temperature exceeds approximately 150 °C. No reverse current flows from output to input due to the body diode orientation of the PMOS device, eliminating the need for an external blocking diode in battery-backup applications.

Pin Description: MCP1700T-3302E TTVAO Pin Definition and Functions
Pin Name Type Function
1 GND Ground Ground connection
2 VIN Input Unregulated input voltage (2.0-6.0V)
3 VOUT Output Regulated 3.3V output
Application Scenarios: In which products and applications is MCP1700T-3302E TTVAO used
  • Automotive ECU always-on 3.3V rail from battery
  • IoT sensor node power from coin cell or Li-Ion battery
  • Post-regulator for switching supply in noise-sensitive circuits
  • Portable medical device battery regulation
Alternative Models: What chips are recommended as replacements for MCP1700T-3302E TTVAO
Manufacturer Part Number Package Notes
TI TPS7A0233PDBVR SOT-23-5 25µA Iq, lower noise
Richtek RT9013-33GB SOT-89-3 Similar LDO, higher Iq
onsemi NCP511SN33T1G SOT-23-5 150mA, lower dropout
Microchip MCP1703AT-3302E CB SOT-23-3 250mA, 2-16V input range

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1