Opens in a new tab

Home » Integrated Circuits ICs » NC7SV14P6X

NC7SV14P6X

Single Schmitt trigger inverter, 0.9-3.6V, 2ns, MicroPak-6

11287

Effective Inventory

Image for reference only

Manufacturer Part:

NC7SV14P6X

Package:

MicroPak-6 (1.45 x 1.0 x 0.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NC7SV14P6X is a single Schmitt trigger inverter in an ultra-small MicroPak-6 package. Operating from 0.9 V to 3.6 V, it provides hysteresis-based noise immunity for signal conditioning in low-voltage, space-constrained applications.

Key Specifications

Function Single Schmitt Trigger Inverter
Supply Voltage 0.9 V to 3.6 V
Propagation Delay 2.0 ns typ @ 3.0V
Hysteresis (VT+ – VT-) 0.55 V typ @ 3.0V
Output Drive ±24 mA @ 3.0V
ICC Max 1 µA
Operating Temperature -55 °C to +125 °C
Package MicroPak-6 (1.45 x 1.0 mm)

Features

  • Ultra-low voltage operation: 0.9 V minimum
  • Schmitt trigger input for noise immunity
  • High hysteresis: 0.55 V typical at 3.0 V
  • Fast propagation: 2.0 ns at 3.0 V
  • High output drive: ±24 mA at 3.0 V
  • Ultra-small MicroPak-6 package
  • I/O tolerant above VCC

Applications

  • Signal conditioning for noisy inputs
  • Square wave generation from analog signals
  • Debouncing mechanical switches
  • Clock signal conditioning and level restoration
Product Introduction: NC7SV14P6X Product Introduction

The onsemi NC7SV14P6X is a single Schmitt trigger inverter from the NC7SV ultra-low-voltage logic family, designed for signal conditioning in modern low-voltage systems. The Schmitt trigger input provides hysteresis (0.55 V typical at 3.0 V supply), which significantly improves noise immunity compared to standard CMOS inverters. This makes the device ideal for cleaning up slowly-rising or noisy input signals, debouncing mechanical switches, and generating clean square waves from sine or triangle wave inputs. The wide 0.9 V to 3.6 V supply range supports sub-1V logic families through 3.3 V systems. The 2.0 ns propagation delay at 3.0 V provides fast signal turnaround for clock conditioning applications. The ultra-small MicroPak-6 package (1.45 x 1.0 mm) enables signal conditioning at the point of need without consuming valuable board space. The ±24 mA output drive capability can directly interface with multiple downstream logic inputs.

Working Principle: NC7SV14P6X Working Principle

The NC7SV14P6X implements a Schmitt trigger inverter using a CMOS input stage with positive feedback that creates two distinct threshold voltages: a higher threshold (VT+) for rising inputs and a lower threshold (VT-) for falling inputs. When the input voltage is below VT-, the output is high. As the input rises through VT+, the positive feedback accelerates the output transition, creating a sharp, clean output edge regardless of the input slew rate. Similarly, when the input falls through VT-, the output transitions low. The difference between VT+ and VT- is the hysteresis voltage (approximately 0.55 V at 3.0 V supply), which provides noise immunity: any noise on the input signal that is smaller than the hysteresis window cannot cause multiple output transitions. This is particularly valuable for slowly-changing input signals (such as RC-filtered or sensor outputs) where standard CMOS inputs might oscillate in the threshold region. The inverter function means the output is the logical complement of the input.

Pin Description: NC7SV14P6X Pin Definition and Functions
Pin Name Type Function
1 N/C – No connect (leave floating)
2 A Input Schmitt trigger input
3 GND Ground Ground
4 Y Output Inverted output
5 N/C – No connect (leave floating)
6 VCC Power Supply voltage (0.9-3.6V)
Application Scenarios: In which products and applications is NC7SV14P6X used
  • Debouncing mechanical switch and button inputs
  • Square wave generation from sensor analog outputs
  • Clock signal conditioning and edge sharpening
  • Noise immunity improvement on long signal traces
Alternative Models: What chips are recommended as replacements for NC7SV14P6X
Manufacturer Part Number Package Notes
TI SN74LVC1G14DCKR SC-70-5 Single Schmitt inverter, 1.65-5.5V
Nexperia 74AUP1G14GW SOT-353 Low-power Schmitt inverter
onsemi NC7S14P5X SOT-553 Similar function, different package
Toshiba TC74VHC14FT SC-88A Schmitt inverter, 2-5.5V

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1