Opens in a new tab

Home » Integrated Circuits ICs » NC7WZ17P6X

NC7WZ17P6X

Dual Schmitt trigger buffer, 1.65-3.6V, 2.5ns, MicroPak-6

6298

Effective Inventory

Image for reference only

Manufacturer Part:

NC7WZ17P6X

Package:

MicroPak-6 (1.45 x 1.0 x 0.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NC7WZ17P6X is a dual Schmitt trigger buffer in a MicroPak-6 package. Operating from 1.65 V to 3.6 V, it combines hysteresis-based noise immunity with non-inverting buffer functionality, ideal for signal conditioning and clock buffering in noisy environments.

Key Specifications

Function Dual Schmitt Trigger Buffer
Supply Voltage 1.65 V to 3.6 V
Propagation Delay 2.5 ns typ @ 3.0V
Hysteresis 0.15 V typ @ 3.0V
Output Drive ±24 mA @ 3.0V
ICC Max 1 µA
Operating Temperature -55 °C to +125 °C
Package MicroPak-6 (1.45 x 1.0 mm)

Features

  • Dual non-inverting Schmitt trigger buffers
  • Hysteresis for improved noise immunity
  • Fast propagation delay: 2.5 ns at 3.0 V
  • High output drive: ±24 mA at 3.0 V
  • Wide supply range: 1.65 V to 3.6 V
  • Ultra-small MicroPak-6 package
  • Inputs tolerant above VCC

Applications

  • Noisy signal conditioning and squaring
  • Clock signal buffering and cleanup
  • Mechanical switch debouncing
  • Sensor output signal restoration
Product Introduction: NC7WZ17P6X Product Introduction

The onsemi NC7WZ17P6X is a dual non-inverting Schmitt trigger buffer that combines noise-immune input conditioning with high-drive output buffering in a tiny MicroPak-6 package. Each channel features a Schmitt trigger input with hysteresis that cleans up slowly-rising, noisy, or ringing input signals into sharp, clean output transitions. The non-inverting buffer function preserves signal polarity while providing ±24 mA output drive capability, sufficient to drive multiple downstream logic inputs or moderately capacitive loads. The 2.5 ns propagation delay at 3.0 V is fast enough for most clock distribution and signal buffering applications. The dual configuration provides two independent channels in a single 6-pin device, making it ideal for differential signal conditioning or redundant clock buffering in space-constrained designs. The 1.65 V to 3.6 V supply range supports modern low-voltage logic families.

Working Principle: NC7WZ17P6X Working Principle

The NC7WZ17P6X integrates two independent Schmitt trigger buffer channels. Each channel consists of a CMOS Schmitt trigger input stage followed by a push-pull output buffer. The Schmitt trigger input stage uses positive feedback to create two distinct switching thresholds: VT+ (positive-going) and VT- (negative-going). When the input rises above VT+, the output transitions high; when the input falls below VT-, the output transitions low. The hysteresis (VT+ minus VT-) is approximately 0.15 V at 3.0 V supply, providing noise immunity by preventing output oscillation on slowly-changing or noisy input signals. The output buffer stage provides current gain, converting the low-power Schmitt trigger output into a ±24 mA drive capability. The non-inverting function means the output follows the input logic level (after Schmitt trigger conditioning) without inversion. The two channels operate independently, enabling use in separate signal paths or differential pair conditioning.

Pin Description: NC7WZ17P6X Pin Definition and Functions
Pin Name Type Function
1 1A Input Buffer 1 Schmitt trigger input
2 2Y Output Buffer 2 output
3 GND Ground Ground
4 2A Input Buffer 2 Schmitt trigger input
5 1Y Output Buffer 1 output
6 VCC Power Supply voltage (1.65-3.6V)
Application Scenarios: In which products and applications is NC7WZ17P6X used
  • Encoder and sensor signal conditioning in motor control
  • Clock signal buffering and edge cleanup
  • Debouncing and squaring mechanical switch outputs
  • Bus receiver signal restoration in noisy environments
Alternative Models: What chips are recommended as replacements for NC7WZ17P6X
Manufacturer Part Number Package Notes
TI SN74LVC2G17DCKR SC-88-8 Dual Schmitt buffer, similar
Nexperia 74LVC2G17GW SOT-363 Dual Schmitt trigger buffer
onsemi NC7WZ17K8X US8-8 Same function, different package
TI SN74LVC1G17DCKR SC-70-5 Single Schmitt buffer

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1