Opens in a new tab

MPQ8633BGLE-Z

16V, 20A synchronous step-down converter with adjustable current limit, configurable frequency, voltage tracking, QFN-21

8540

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ8633BGLE-Z

Package:

QFN-21 (3mm x 4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ8633BGLE-Z is a Monolithic Power Systems (MPS) 16V, 20A fully integrated synchronous step-down converter with adjustable current limit, configurable frequency, and voltage tracking. It adopts internally compensated constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The switching frequency can be set to 600kHz, 800kHz, or 1000kHz via MODE configuration. Available in a QFN-21 (3mm x 4mm) package.

Key Specifications

Input Voltage Range 4V to 16V (internal bias); 2.7V to 16V (external 3.3V VCC)
Output Current 20A
Output Voltage Range 0.6V to 5.5V (up to 90% x VIN)
Reference Voltage Accuracy 0.5% (0°C to +70°C); 1% (-40°C to +125°C)
Switching Frequency 600kHz / 800kHz / 1000kHz selectable
Control Mode Adaptive Constant-On-Time (COT)
Low-Side RDS(ON) Integrated MOSFETs
Soft Start Programmable from 1ms
Operating Temperature -40°C to +125°C

Features

  • Differential output voltage remote sense
  • Programmable accurate current limit level
  • Proprietary switching loss reduction technique
  • Selectable pulse skip mode or forced CCM operation
  • Output voltage tracking and discharge
  • PGOOD active clamped at low level during power failure
  • Pre-bias start-up support
  • Non-latch OCP, UVP, UVLO, thermal shutdown; latch-off for OVP

Applications

  • Telecommunication and networking systems
  • Servers, cloud computing, and storage
  • Base stations
  • General-purpose POL systems
  • 12V distribution power systems
  • High-end televisions and game consoles
Product Introduction: MPQ8633BGLE-Z Product Introduction

The MPQ8633BGLE-Z is a Monolithic Power Systems fully integrated, high-frequency synchronous buck converter capable of delivering up to 20A output current. It features a wide input voltage range of 4V to 16V, configurable switching frequency (600/800/1000kHz), and adaptive COT control for ultrafast transient response. The device includes differential remote sense, programmable current limit, output voltage tracking, and comprehensive protection features. Available in a compact QFN-21 (3mm x 4mm) package, it is ideal for server, telecom, and POL power applications.

Working Principle: MPQ8633BGLE-Z Working Principle

The MPQ8633BGLE-Z operates using an internally compensated constant-on-time (COT) control scheme. The high-side MOSFET turns on for a fixed on-time when the output voltage drops below the reference, then turns off and the low-side synchronous MOSFET conducts the inductor current. The adaptive COT adjusts the on-time based on input and output voltage to maintain relatively constant switching frequency. The MODE pin selects between 600kHz, 800kHz, or 1000kHz operation, and between pulse-skip mode (PSM) for light-load efficiency or forced continuous conduction mode (FCCM). Over-current protection uses valley current sensing with hiccup mode after consecutive fault cycles. The differential remote sense compensates for PCB trace resistance to maintain accurate output voltage at the load point.

Pin Description: MPQ8633BGLE-Z Pin Definition and Functions
Pin Mnemonic Description
1 VIN Input supply voltage
2 EN Enable input (active high)
3 MODE Frequency/mode selection pin
4 TRK/REF Tracking/reference voltage pin
5 FB Feedback voltage input
6 DIFF Differential remote sense input
7 ILIM Current limit setting pin
8 PGOOD Power good open-drain output
9 VCC Internal 3.3V LDO output / external bias input
10 BST Bootstrap capacitor pin
11-12 SW Switch node output
13-18 VIN Input supply (multiple pins for low inductance)
19-21 PGND Power ground
Application Scenarios: In which products and applications is MPQ8633BGLE-Z used
  • Server and data center POL power with 20A capability and remote sense
  • Telecom base station 12V-to-low-voltage conversion with configurable frequency
  • Storage system core voltage rails requiring voltage tracking and sequencing
  • Game console and GPU power with adjustable current limit protection
  • Networking equipment distributed power bus with PGOOD monitoring
Alternative Models: What chips are recommended as replacements for MPQ8633BGLE-Z
Model Manufacturer Key Difference
MPQ8633BGLE-P MPS Same part, different reel size (P vs Z)
MPQ8633AGLE-Z MPS Earlier version, different OVP behavior
TPS54560B TI 5A, 60V input, lower current
ISL6505 Renesas Similar 20A POL converter
LTM4650 ADI uModule 25A with integrated inductor

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1