Opens in a new tab

MPQ8901DD-AEC1

AEC-Q100 36V 500mA ultra-low-noise LDO, 72dB PSRR, 6.5μVrms noise, adjustable output, SOT-89-5

7850

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ8901DD-AEC1

Package:

SOT-89-5 (4.5 x 2.5 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ8901DD-AEC1 is a Monolithic Power Systems (MPS) AEC-Q100 qualified 36V, 500mA low-dropout (LDO) linear regulator with ultra-low noise and high PSRR. It provides a very clean output voltage for noise-sensitive automotive applications such as ADAS, infotainment, and sensor power supplies.

Key Specifications

Input Voltage Range 2.5V to 36V
Output Current 500mA
Output Voltage Adjustable from 0.8V
Dropout Voltage 200mV @ 500mA
PSRR 72dB @ 1kHz
Output Noise 6.5μV RMS (10Hz-100kHz)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100

Features

  • AEC-Q100 qualified for automotive applications
  • Ultra-low output noise: 6.5μV RMS
  • High PSRR: 72dB @ 1kHz
  • Low dropout: 200mV @ 500mA
  • Adjustable output voltage from 0.8V
  • Enable pin for power sequencing
  • Current limit and thermal shutdown protection
  • Stable with small ceramic output capacitors

Applications

  • ADAS radar and camera sensor power
  • Automotive infotainment noise-sensitive rails
  • RF and PLL power supply filtering
  • Post-regulation after switching converters
  • Precision analog circuit power
Product Introduction: MPQ8901DD-AEC1 Product Introduction

The MPQ8901DD-AEC1 is an AEC-Q100 qualified ultra-low-noise LDO linear regulator from Monolithic Power Systems. With 36V maximum input, 500mA output current, and only 200mV dropout, it provides 72dB PSRR and 6.5μV RMS output noise—ideal for noise-sensitive automotive ADAS, infotainment, and sensor power rails. The adjustable output starts from 0.8V, and the enable pin supports power sequencing. Packaged in a compact SOT-89-5 with robust current limit and thermal shutdown protection.

Working Principle: MPQ8901DD-AEC1 Working Principle

The MPQ8901DD-AEC1 operates as a series-pass linear regulator. A precision bandgap reference provides the target voltage, and an error amplifier drives the pass transistor to maintain the output at the programmed level. The ultra-low noise performance is achieved through optimized internal biasing and a noise-reduction capacitor on the reference pin. The high PSRR results from the high open-loop gain of the error amplifier and the low output impedance of the pass element. Current limiting is implemented by sensing the pass transistor current and limiting the gate drive when the threshold is exceeded. Thermal shutdown disables the pass element when the junction temperature exceeds the safe limit.

Pin Description: MPQ8901DD-AEC1 Pin Definition and Functions
Pin Mnemonic Description
1 EN Enable input (active high)
2 IN Input supply voltage (2.5-36V)
3 GND Ground
4 OUT Regulated output voltage
5 ADJ Feedback / adjustment pin
Application Scenarios: In which products and applications is MPQ8901DD-AEC1 used
  • ADAS radar module power supply requiring ultra-low noise and high PSRR
  • Automotive camera sensor clean power rail with 36V input tolerance
  • RF transceiver and PLL power post-regulation after buck converter
  • Infotainment DAC and audio codec power with 6.5μVrms noise
  • Precision analog front-end power supply in automotive ECU
Alternative Models: What chips are recommended as replacements for MPQ8901DD-AEC1
Model Manufacturer Key Difference
TPS7A1650 TI 40V, 150mA ultra-low-noise LDO
LT3042 ADI 20V, 200mA ultra-low-noise LDO
NCP591 onsemi 45V, 150mA automotive LDO
MPQ8902DD-AEC1 MPS Higher current version
MAX25210 ADI 36V, 200mA AEC-Q100 LDO

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1