Opens in a new tab

AP62200WU-7

2A 4.2-18V synchronous buck converter, COT, 90/65mΩ MOSFETs, EMI optimized, TSOT-26

11420

Effective Inventory

Image for reference only

Manufacturer Part:

AP62200WU-7

Package:

TSOT-26 (2.9 x 1.6 x 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP62200WU-7 is a Diodes Incorporated 2A, synchronous buck converter with a wide input voltage range of 4.2V to 18V. It integrates 90mΩ high-side and 65mΩ low-side MOSFETs, uses Constant On-Time (COT) control for fast transient response, and features a proprietary gate driver design optimized for EMI reduction. Available in a TSOT-26 package.

Key Specifications

Input Voltage Range 4.2V to 18V
Output Current 2A
Output Voltage Range 0.8V to 7V
High-Side RDS(ON) 90mΩ
Low-Side RDS(ON) 65mΩ
Switching Frequency 750kHz (typical)
Quiescent Current 135μA (typical)
Shutdown Current 1.3μA (typical)
Operating Temperature -40°C to +125°C

Features

  • Fully integrated 90mΩ/65mΩ MOSFETs
  • Constant On-Time (COT) control for fast transient response
  • Proprietary gate driver for EMI reduction
  • PFM/PWM operation mode for light-load efficiency
  • Internal 2.5ms soft-start
  • EN pin with built-in current source for auto start-up
  • Cycle-by-cycle valley current limit
  • Undervoltage lockout (UVLO) and thermal shutdown

Applications

  • 5V and 12V distributed power bus supplies
  • Flat screen TV sets and monitors
  • Set-top boxes and IP cameras
  • FPGA, DSP, and ASIC power supplies
  • Network systems and gaming consoles
Product Introduction: AP62200WU-7 Product Introduction

The AP62200WU-7 is a Diodes Incorporated 2A synchronous buck converter with 4.2V to 18V input range and integrated 90mΩ/65mΩ MOSFETs. Using COT control, it achieves fast transient response with minimal output voltage ripple. A proprietary gate driver scheme reduces switching node ringing and high-frequency EMI noise. The device supports PFM/PWM mode for high light-load efficiency (84% at 5mA), includes 2.5ms internal soft-start, and features comprehensive protection. The TSOT-26 package enables compact, low-profile designs.

Working Principle: AP62200WU-7 Working Principle

The AP62200WU-7 uses Constant On-Time (COT) control where the high-side MOSFET turns on for a calculated fixed duration based on VIN/VOUT ratio when the FB voltage falls below the internal reference. The low-side synchronous MOSFET then conducts the inductor current during the off-time. In PFM mode at light loads, the device reduces switching frequency to maintain efficiency. The proprietary gate driver slows the MOSFET turn-on/turn-off edges slightly to dampen ringing on the switch node, reducing high-frequency radiated EMI without significantly impacting switching losses. The valley current limit monitors the low-side current on a cycle-by-cycle basis, and hiccup mode activates if an overcurrent condition persists.

Pin Description: AP62200WU-7 Pin Definition and Functions
Pin Mnemonic Description
1 BST Bootstrap capacitor pin
2 VIN Input supply voltage (4.2-18V)
3 EN Enable input (active high, with internal current source)
4 GND Ground
5 FB Feedback voltage input
6 SW Switch node output
Application Scenarios: In which products and applications is AP62200WU-7 used
  • 12V to 5V/3.3V set-top box and IP camera power supply
  • Flat screen TV DDR and SoC core voltage with EMI-optimized switching
  • FPGA/DSP core voltage rail (1.0V/1.2V at 2A) from 5V input
  • Home appliance and white goods distributed power bus
  • Networking equipment POL with PFM mode for standby efficiency
Alternative Models: What chips are recommended as replacements for AP62200WU-7
Model Manufacturer Key Difference
AP62201WU-7 Diodes Inc Same part, forced PWM at light load
AP62150WU-7 Diodes Inc 1.5A version, pin-compatible
MP2143GD MPS 2A, 18V, QFN-8
TLV62569 TI 2A, 5.5V, DCS-Control
SY8113 Silergy 3A, 18V, SOT-23-6

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1