Opens in a new tab

AP22814A

Single-channel power switch, 2.7-5.5V, 0.5-2.5A adjustable ILIM, 55mΩ, auto-discharge, MSOP-8

9870

Effective Inventory

Image for reference only

Manufacturer Part:

AP22814A

Package:

MSOP-8 (3.0 x 3.0 x 0.85 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP22814A is a Diodes Incorporated single-channel power switch with current limiting and auto-discharge, designed for USB power switching and hot-swap applications. It supports 0.5A to 2.5A adjustable current limit, operates from 2.7V to 5.5V, and features a low 55mΩ RDS(ON) for minimal voltage drop.

Key Specifications

Input Voltage Range 2.7V to 5.5V
Current Limit 0.5A to 2.5A (adjustable via ILIM resistor)
RDS(ON) 55mΩ typical
Reverse Current Blocking Yes
Auto-Discharge Integrated output discharge
Operating Temperature -40°C to +85°C

Features

  • Adjustable current limit from 0.5A to 2.5A
  • Low RDS(ON): 55mΩ typical
  • Reverse current blocking protection
  • Integrated output auto-discharge
  • Thermal shutdown protection
  • Undervoltage lockout (UVLO)
  • Fault flag output (FLG pin)
  • EN pin for on/off control

Applications

  • USB port power switching
  • Hot-swap power management
  • PCIe and server power distribution
  • Portable device power path management
  • SSD and HDD power control
Product Introduction: AP22814A Product Introduction

The AP22814A is a Diodes Incorporated single-channel power switch with adjustable current limiting (0.5A-2.5A) and auto-discharge function. Operating from 2.7V to 5.5V, it features 55mΩ RDS(ON), reverse current blocking, thermal shutdown, and undervoltage lockout. The fault flag output provides real-time status indication. Available in MSOP-8 package, it is ideal for USB power switching, hot-swap management, and portable device power path control.

Working Principle: AP22814A Working Principle

The AP22814A uses an N-channel MOSFET as the main power switch, controlled by the EN pin. When enabled, the MOSFET connects the input to the output with only 55mΩ of resistance. The current limit circuit monitors the load current and limits it to the programmed value set by the ILIM resistor. When the current limit threshold is exceeded, the MOSFET operates in constant-current mode. The reverse current blocking circuit detects when VOUT exceeds VIN and disables the MOSFET to prevent current backflow. When the EN pin is de-asserted, the auto-discharge function rapidly discharges the output capacitance through an internal discharge resistor, ensuring a clean power-down sequence. The FLG pin goes low during fault conditions (overcurrent, thermal shutdown, UVLO).

Pin Description: AP22814A Pin Definition and Functions
Pin Mnemonic Description
1 VIN Input supply (2.7-5.5V)
2 GND Ground
3 EN Enable input (active high)
4 ILIM Current limit setting resistor
5 FLG Fault flag output (active low, open drain)
6 VOUT Output to load
7-8 VOUT Output to load (parallel pins for low RDS)
Application Scenarios: In which products and applications is AP22814A used
  • USB 2.0/3.0 port power switch with 500mA-2.5A current limiting
  • Hot-plug PCIe card power management with fault detection
  • Portable device battery-to-system power path with reverse blocking
  • SSD/HDD power control with auto-discharge for hot-swap
  • Server blade power distribution with FLG fault monitoring
Alternative Models: What chips are recommended as replacements for AP22814A
Model Manufacturer Key Difference
AP22814B Diodes Inc Higher current limit range
TPS2034 TI Dual-channel power switch
MAX14572 ADI Adjustable current limiter, 5.5V
FDC6324L onsemi Single load switch, small footprint
AP22802 Diodes Inc Single channel, fixed 1.5A limit

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1