Opens in a new tab

MPQ4483GV-AEC1-Z

AEC-Q100 G1 3A 36V USB buck converter, BC1.2 DCP/CDP, Apple Divider, data switch, QFN-25

50000

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ4483GV-AEC1-Z

Package:

QFN-25 (4mm x 5mm) with wettable flanks

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ4483GV-AEC1-Z is a Monolithic Power Systems (MPS) AEC-Q100 Grade 1 qualified 3A, 36V synchronous step-down converter with USB charging port support. It integrates BC 1.2 DCP and CDP modes, Apple Divider mode, bidirectional USB 2.0 data switching, and ground-to-battery short protection, making it a complete automotive USB charging solution.

Key Specifications

Input Voltage Range 4.2V to 36V
Output Current 3A
Output Voltage Range 1V to 20V (adjustable)
High-Side RDS(ON) 25mΩ
Low-Side RDS(ON) 20mΩ
Integrated Sense Resistor 4mΩ (ground-sensing)
Switching Frequency 200kHz to 2.2MHz (adjustable)
USB Modes BC 1.2 DCP/CDP, Apple Divider, 1.2V/1.2V
Operating Temperature -40°C to +125°C
Qualification AEC-Q100 Grade 1

Features

  • AEC-Q100 Grade 1 qualified for automotive USB charging
  • BC 1.2 DCP/CDP and Apple Divider mode support
  • Bidirectional USB 2.0 high-speed data switching
  • Integrated 4mΩ ground-sensing resistor for CC limit
  • Adjustable two-level constant-current (CC) limit
  • Spread spectrum option at 450kHz for EMI reduction
  • Ground-to-battery short protection driver
  • Adjustable line drop compensation
  • LDO mode for cold-crank low dropout operation
  • Output over-voltage protection (OVP)
  • Wettable flank QFN-25 package for automotive solder inspection

Applications

  • Automotive USB charging ports (Type-A and Type-C)
  • Car infotainment USB power delivery
  • Automotive rear-seat USB chargers
  • Industrial USB hub power supplies
  • Automotive accessory power outlets
Product Introduction: MPQ4483GV-AEC1-Z Product Introduction

The MPQ4483GV-AEC1-Z is an MPS AEC-Q100 Grade 1 qualified 3A, 36V synchronous step-down converter with integrated USB charging port support. It provides BC 1.2 DCP/CDP modes, Apple Divider mode, and bidirectional USB 2.0 high-speed data switching. The integrated 4mΩ ground-sensing resistor and adjustable two-level CC limit enable precise USB current management. Features include ground-to-battery short protection, spread spectrum for EMI, LDO mode for cold-crank, and wettable flank QFN-25 package for automotive solder inspection.

Working Principle: MPQ4483GV-AEC1-Z Working Principle

The MPQ4483GV-AEC1-Z operates as a synchronous buck converter with integrated USB charging intelligence. The 25mΩ/20mΩ MOSFET pair switches at 200kHz-2.2MHz to regulate the output voltage. The integrated 4mΩ ground-sensing resistor provides accurate output current measurement for CC limit functionality. The USB mode detection logic automatically identifies the connected device type and configures the D+/D- data pins for BC 1.2 DCP, CDP, Apple Divider, or 1.2V/1.2V modes. The bidirectional USB 2.0 data switch routes high-speed data signals between the USB port and the host controller. The adjustable two-level CC limit allows different current thresholds for normal and high-power charging. Ground-to-battery short protection detects and protects against fault conditions where the ground connection is shorted to battery voltage. The spread spectrum function dithers the switching frequency around 450kHz to reduce peak EMI emissions.

Pin Description: MPQ4483GV-AEC1-Z Pin Definition and Functions
Pin Mnemonic Description
1-4 VIN Input supply (4.2-36V)
5-8 PGND Power ground
9-10 SW Switch node output
11 BST Bootstrap capacitor
12 VCC Internal LDO output
13 EN Enable input
14 FB Feedback voltage input
15 COMP Loop compensation
16 FREQ/SYNC Frequency set / sync
17 ILIM1/ILIM2 CC limit set pins
18-19 D+/D- USB data switch pins
20-25 SGND/PG Signal ground / power good
Application Scenarios: In which products and applications is MPQ4483GV-AEC1-Z used
  • Automotive center console USB-A charging port with BC1.2 DCP mode at 5V/2.4A
  • Car rear-seat USB-C charging with CDP mode and data pass-through
  • Automotive infotainment USB hub with Apple and Android device charging
  • Industrial USB charging station with ground-to-battery short protection
  • Automotive accessory 12V to 5V/3A power supply with spread spectrum EMI
Alternative Models: What chips are recommended as replacements for MPQ4483GV-AEC1-Z
Model Manufacturer Key Difference
MPQ4483GV-FD-AEC1-Z MPS Same device, forced discharge variant
MPQ4228GRE-C-AEC1 MPS 3A, 36V, Type-C 5V@3A DFP mode
MAX20404 ADI 3.5A USB buck, AEC-Q100
TPS2549 TI USB charging switch + D+/D-
AP64500 Diodes Inc 5A USB buck converter

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1