Opens in a new tab

MPQ4312GRE-AEC1-Z

AEC-Q100 45V 2A synchronous buck, spread spectrum, low IQ, SOIC-8 EP

7830

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ4312GRE-AEC1-Z

Package:

SOIC-8 EP (5.0 x 4.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ4312GRE-AEC1-Z is a Monolithic Power Systems (MPS) AEC-Q100 qualified 45V, 2A synchronous step-down converter with ultra-low quiescent current and frequency spread spectrum. It operates from 4.2V to 45V input, making it ideal for automotive 12V/24V bus systems with load-dump protection requirements.

Key Specifications

Input Voltage Range 4.2V to 45V
Output Current 2A
Switching Frequency 200kHz to 2.2MHz (adjustable)
Spread Spectrum Frequency dithering at 450kHz
Quiescent Current Low IQ in PFM mode
Operating Temperature -40°C to +125°C
Qualification AEC-Q100

Features

  • AEC-Q100 qualified for automotive applications
  • Wide 4.2V to 45V input range (load-dump tolerant)
  • Frequency spread spectrum for EMI reduction
  • Ultra-low quiescent current in PFM mode
  • Synchronous rectification for high efficiency
  • External frequency synchronization
  • Adjustable output voltage from 0.8V
  • OCP, OVP, UVLO, and thermal shutdown protection
  • LDO mode for low dropout operation

Applications

  • Automotive ECU power supplies
  • 12V/24V bus to low-voltage conversion
  • ADAS sensor module power
  • Industrial 24V distributed power
  • Automotive infotainment systems
Product Introduction: MPQ4312GRE-AEC1-Z Product Introduction

The MPQ4312GRE-AEC1-Z is an MPS AEC-Q100 qualified 45V, 2A synchronous step-down converter with frequency spread spectrum for EMI reduction. Operating from 4.2V to 45V, it provides load-dump protection for automotive 12V/24V bus systems. The spread spectrum function dithers the switching frequency to reduce peak EMI emissions. Ultra-low quiescent current in PFM mode, external frequency sync, LDO mode for low dropout, and comprehensive protection make it ideal for automotive ECU, ADAS, and industrial 24V power applications.

Working Principle: MPQ4312GRE-AEC1-Z Working Principle

The MPQ4312GRE-AEC1-Z operates as a peak current mode synchronous buck converter. The integrated high-side and low-side MOSFETs switch at 200kHz-2.2MHz to step down the input voltage. In PFM mode at light loads, the switching frequency reduces automatically to maintain efficiency. The spread spectrum function modulates the switching frequency around the center frequency (typically ±5-10% dithering at a low frequency rate), spreading the switching harmonic energy across a wider bandwidth and reducing peak EMI readings. The SYNC pin allows external clock synchronization for multi-converter systems. LDO mode increases the maximum duty cycle to maintain output regulation even when VIN approaches VOUT. Cycle-by-cycle current limiting, output OVP, input UVLO, and thermal shutdown provide comprehensive fault protection.

Pin Description: MPQ4312GRE-AEC1-Z Pin Definition and Functions
Pin Mnemonic Description
1 BST Bootstrap capacitor
2 VIN Input supply (4.2-45V)
3 EN/SYNC Enable / frequency sync input
4 FB Feedback voltage input
5 COMP Loop compensation
6 PGOOD Power good output
7 GND Ground
8 SW Switch node output
EP PGND Exposed pad (power ground)
Application Scenarios: In which products and applications is MPQ4312GRE-AEC1-Z used
  • Automotive ECU 12V/24V to 3.3V/5V power with 45V load-dump protection
  • ADAS radar module power supply with spread spectrum EMI compliance
  • Industrial 24V bus to low-voltage conversion with PFM light-load efficiency
  • Automotive infotainment 12V to 5V regulator with external sync capability
  • Multiple converter system with frequency synchronization to avoid beat noise
Alternative Models: What chips are recommended as replacements for MPQ4312GRE-AEC1-Z
Model Manufacturer Key Difference
MPQ4572GRE-AEC1 MPS 60V, 2A, higher voltage rating
LM61460 TI 36V, 6A, AEC-Q100 buck
MAX20004 ADI 36V, 4A AEC-Q100 buck
TPS5450 TI 36V, 3A, non-automotive
LMR36015 TI 60V, 1.5A, AEC-Q100

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1