Opens in a new tab

TLE9263-3BQX

Mid-Range+ SBC, 1xCAN FD+PN, 2xLIN, 3x LDO, 4x HS output, 15μA sleep, VQFN-48

0

Effective Inventory

Image for reference only

Manufacturer Part:

TLE9263-3BQX

Package:

VQFN-48 (7 x 7 x 0.9 mm) with LTI

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLE9263-3BQX is an Infineon OPTIREG™ Mid-Range+ System Basis Chip (SBC) with 1x CAN FD transceiver (with Partial Networking), 2x LIN transceivers, 3 voltage regulators (5V/250mA, 5V/100mA, external PNP driver), 4 high-side outputs, and 16-bit SPI interface. The highest-featured member of the TLE926x mid-range family, designed for automotive CAN-LIN body and comfort modules.

Key Specifications

CAN Transceiver 1x CAN FD (ISO 11898-2:2016), up to 5Mbps, Partial Networking
LIN Transceivers 2x LIN 2.2a / J2602 with TXD timeout
VCC1 (Main LDO) 5V / 250mA
VCC2 (Sensor LDO) 5V / 100mA (off-board protected)
VCC3 (External PNP Driver) 5V or 3.3V / up to 400mA (with external PNP)
High-Side Outputs 4 x 150mA (7Ω typ.)
Sleep Mode Current 15μA (typical)
Stop Mode Current 44μA (typical)
Wake Sources CAN, LIN, Wake pins, Cyclic wake
Operating Temperature -40°C to +150°C
Qualification AEC-Q100

Features

  • OPTIREG™ Mid-Range+ SBC family (software compatible across TLE926x/TLE927x)
  • CAN FD with Partial Networking and FD tolerant mode
  • 2x LIN transceivers (LIN 2.2a / J2602) with configurable TXD timeout
  • Three voltage regulators (2 internal LDO + 1 external PNP driver)
  • 4 high-side outputs with 7Ω typ. on-resistance
  • 2 configurable HV GPIOs
  • 3 HV wake inputs with voltage level monitoring
  • Configurable timeout/window watchdog with reset
  • Cyclic wake and cyclic sense in all low-power modes
  • Up to 3 fail outputs
  • 16-bit SPI for control and diagnostics
  • VQFN-48 (7x7mm) with LTI feature for AOI

Applications

  • Seat control modules with CAN and LIN
  • Smart power closure systems (door, tailgate)
  • HVAC control modules
  • Automotive PDU (power distribution unit)
  • Fuel-cell control units (FCCU)
Product Introduction: TLE9263-3BQX Product Introduction

The TLE9263-3BQX is an Infineon OPTIREG™ Mid-Range+ System Basis Chip (SBC) integrating one CAN FD transceiver with Partial Networking, two LIN 2.2a transceivers, three voltage regulators (5V/250mA main LDO, 5V/100mA sensor LDO, and external PNP transistor driver), four 150mA high-side outputs, and a 16-bit SPI interface. With 15μA sleep mode current, configurable watchdog, cyclic wake/sense, and both CAN and LIN wake capability, it is the most feature-rich member of the TLE926x family for automotive seat, door, HVAC, and PDU applications. Software compatible across the entire TLE926x and TLE927x SBC family.

Working Principle: TLE9263-3BQX Working Principle

The TLE9263-3BQX integrates power management, dual-bus communication (CAN + 2x LIN), and diagnostic functions into a single SBC. The main LDO (VCC1) provides 5V/250mA for MCU supply. The sensor LDO (VCC2) provides 5V/100mA with off-board protection. The external PNP driver (VCC3) supports standalone or load-sharing mode. The CAN FD transceiver supports up to 5Mbps with Partial Networking for selective wake. The two LIN transceivers support LIN 2.2a/J2602 with configurable TXD timeout for bus stuck-dominant protection and LIN Flash mode for fast reprogramming. The state machine manages SBC modes (Normal, Stop, Sleep, Restart, Fail-Safe). All three communication channels (CAN, LIN1, LIN2) can serve as wake sources from Stop and Sleep modes. The 4 high-side outputs and 2 GPIOs provide flexible peripheral control. The 16-bit SPI provides complete configuration and diagnostic access.

Pin Description: TLE9263-3BQX Pin Definition and Functions
Pin Group Mnemonic Description
1-4 VIN/GND Battery supply and ground
5-8 CANH/CANL/TXD/RXD CAN bus and MCU interface
9-14 LIN1/LIN2 Dual LIN bus transceiver pins
15-20 SPI 16-bit SPI interface
21-24 VCC1/VCC2 LDO outputs
25-28 HS1-HS4 4 high-side switch outputs
29-34 WK1-WK3 3 HV wake inputs
35-48 FO/GPIO/VCC3 Fail outputs, GPIO, external PNP driver
Application Scenarios: In which products and applications is TLE9263-3BQX used
  • Seat control module with CAN + 2x LIN for multi-motor seat adjustment and memory
  • Smart door closure module with CAN FD + LIN bus and 4 high-side outputs
  • HVAC control with CAN FD, 2x LIN for zone actuators, and external PNP 3.3V supply
  • Automotive PDU with CAN FD Partial Networking selective wake and 15μA sleep
  • Fuel-cell control unit with CAN-LIN SBC, watchdog, and fail-safe outputs
Alternative Models: What chips are recommended as replacements for TLE9263-3BQX
Model Manufacturer Key Difference
TLE9261-3BQX Infineon Same without LIN transceivers
TLE9262-3BQX Infineon Same with 1x LIN (not 2x)
TLE9278BQX Infineon 4x CAN FD, SMPS buck, high-end SBC
TJA1145T NXP Single CAN SBC, no LIN
NXP S32K + SBC combo NXP MCU with integrated SBC

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1