Opens in a new tab

Home » Integrated Circuits ICs, Sensors » BLM21PG300SN1

BLM21PG300SN1

Ferrite bead, 0805, 30Ohm @ 100MHz, 2A rated, AEC-Q200

45000

Effective Inventory

Image for reference only

Manufacturer Part:

BLM21PG300SN1

Package:

0805 (2012 Metric) 2.0 x 1.25 x 1.25 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BLM21PG300SN1 is a chip ferrite bead from Murata’s BLM21P series, featuring 30 Ohm impedance at 100MHz with 2A rated current in a 0805 (2012 Metric) surface-mount package. AEC-Q200 qualified, it provides effective EMI suppression in power lines while maintaining low DC resistance for minimal voltage drop at high current.

Key Specifications

Type Ferrite Bead
Impedance @ 100MHz 30 Ohm
Rated Current 2A
DC Resistance (max) 0.040 Ohm
Package / Case 0805 (2012 Metric)
Operating Temperature -55°C to +125°C
Qualification AEC-Q200
EU RoHS Compliant

Features

  • AEC-Q200 automotive qualified
  • 30 Ohm impedance at 100MHz for EMI suppression
  • 2A high rated current with low DC resistance
  • 0805 standard footprint for easy placement
  • BLM21P series: high-current, low-DCR type

Applications

  • Automotive ECU power line EMI filtering
  • USB and CAN bus noise suppression
  • DC power supply noise filtering
  • Industrial equipment EMI countermeasures
Product Introduction: BLM21PG300SN1 Product Introduction

The BLM21PG300SN1 is a chip ferrite bead from Murata’s BLM21P series, featuring 30 Ohm impedance at 100MHz with 2A rated current in a 0805 (2012 Metric) surface-mount package. AEC-Q200 qualified for automotive applications, it provides effective EMI suppression in power lines while maintaining low DC resistance (40 mOhm max) for minimal voltage drop at high current. The BLM21P ‘G’ series offers the highest current capability in the 0805 ferrite bead category.

Working Principle: BLM21PG300SN1 Working Principle

The BLM21PG300SN1 operates as a chip ferrite bead:

1. Ferrite Material: The device consists of a multilayer ferrite body with internal conductor patterns. The ferrite material exhibits frequency-dependent impedance: low impedance at DC/low frequencies (allowing DC current to pass with minimal loss) and high impedance at high frequencies (blocking EMI noise).

2. Impedance Characteristic: At DC, the device behaves like a resistor (DCR ≈ 40 mOhm). As frequency increases, the ferrite material’s complex permeability causes impedance to rise, reaching 30 Ohm at 100MHz. This impedance is a combination of resistive (lossy) and reactive (inductive) components.

3. EMI Suppression: When placed in series with a power line, high-frequency noise currents see high impedance and are attenuated, while the DC current passes with minimal voltage drop (V = I × DCR = 2A × 0.04Ohm = 80mV).

4. Current Derating: Above the rated 2A, the ferrite material approaches magnetic saturation, reducing impedance. At saturation, the ferrite bead loses its EMI suppression effectiveness.

Pin Description: BLM21PG300SN1 Pin Definition and Functions
Terminal Name Type Function
1 Terminal A Passive Series element – connected to noise source side
2 Terminal B Passive Series element – connected to clean side / load

Note: 2-terminal passive ferrite bead, no polarity. Place as close as possible to the noise source for maximum EMI suppression effectiveness. For power lines, place near the connector entry point. For IC decoupling, place between the power source and the IC.

Application Scenarios: In which products and applications is BLM21PG300SN1 used
Application Circuit Role Key Requirement
Automotive ECU Power line EMI filtering at connector entry 30Ohm @ 100MHz, 2A, AEC-Q200
USB Interface VBUS line noise suppression 2A rated, low DCR
CAN Bus Power supply noise filtering 30Ohm impedance, 0805
DC-DC Converter Input/output EMI filtering High current, AEC-Q200
Industrial Equipment Motor drive noise suppression 2A, 30Ohm, reliable
Alternative Models: What chips are recommended as replacements for BLM21PG300SN1
Manufacturer Part Number Package Key Specs Notes
TDK MMZ2012S300A 0805 30Ohm @ 100MHz, 2A Direct equivalent
TDK MMZ2012D300C 0805 30Ohm @ 100MHz, 2A Direct equivalent
TAIYO YUDEN FBMH2012HM300NT 0805 30Ohm @ 100MHz, 2A Direct equivalent
Samsung CIM2012S300NE 0805 30Ohm @ 100MHz, 2A Direct equivalent
Wurth 742792030 0805 30Ohm @ 100MHz, 2A Direct equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1