Opens in a new tab

IS42S32200L-6TL

64Mbit SDR SDRAM, 2Mx32, 166MHz, 3.3V, LVTTL, 86-pin TSOP-II, commercial, obsolete

16781

Effective Inventory

Image for reference only

Manufacturer Part:

IS42S32200L-6TL

Package:

86-pin TSOP-II (22.42 x 10.29 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IS42S32200L-6TL is a 64Mbit (2M x 32-bit x 4 banks) Synchronous DRAM (SDRAM) from ISSI (Integrated Silicon Solution Inc.), operating at 166MHz with CAS Latency 3. This device uses a 3.3V single power supply with an LVTTL interface and is packaged in an 86-pin TSOP-II. The -6 speed grade provides 166MHz clock frequency with 5.4ns access time, suitable for networking, computing, and embedded memory applications.

Key Specifications

Memory Size 64Mbit (8MB)
Organization 2M x 32-bit x 4 Banks
Technology SDR SDRAM
Clock Frequency 166 MHz
CAS Latency 2 or 3
Access Time 5.4 ns (CL=3)
Supply Voltage 3.3V (3.0V to 3.6V)
Interface LVTTL
Refresh 4096 cycles / 64ms
Package 86-pin TSOP-II (10.16mm width)
Operating Temperature 0C to +70C (Commercial)
Part Status Obsolete

Features

  • Single Data Rate SDRAM with 166MHz clock
  • Wide 32-bit data bus for high throughput (667 MB/s peak)
  • Programmable CAS Latency (2 or 3)
  • Programmable burst length (1, 2, 4, 8, full page)
  • 4 internal banks for interleaved access
  • Auto refresh and self refresh modes

Applications

  • Networking equipment buffer memory
  • Embedded system main memory
  • Industrial control frame buffers
  • Printer and imaging memory
  • Consumer electronics working RAM
Product Introduction: IS42S32200L-6TL Product Introduction

The IS42S32200L-6TL is a 64Mbit SDR SDRAM from ISSI organized as 2M x 32-bit with 4 internal banks. Operating at 166MHz (CL3) on a 3.3V supply with an LVTTL interface, it delivers up to 667 MB/s peak bandwidth through its 32-bit wide data bus. The 86-pin TSOP-II package is compatible with many legacy embedded and networking designs. This device is now obsolete but was widely used in networking equipment, printers, and industrial systems requiring wide-bus SDRAM memory.

Working Principle: IS42S32200L-6TL Working Principle

The IS42S32200L-6TL operates as a synchronous DRAM where all operations are referenced to the rising edge of the CLK signal. Read and write accesses are burst-oriented starting at a selected location. An ACTIVE command selects the bank and row, followed by a READ or WRITE command selecting the starting column. The 4 internal banks allow interleaved access: one bank can be precharged while another is being accessed, hiding the precharge latency and providing seamless high-speed operation. Auto Precharge mode initiates a self-timed row precharge at the end of the burst. The Mode Register sets CAS Latency (2 or 3), burst length (1/2/4/8/full page), and burst type (sequential/interleaved). Self Refresh mode retains data with minimal power consumption by internally generating refresh cycles. Auto Refresh requires 4096 cycles every 64ms.

Pin Description: IS42S32200L-6TL Pin Definition and Functions
Pin Group Name Type Function
Address A0-A10, BA0, BA1 Input Row/column address and bank select
Data DQ0-DQ31 Bidirectional 32-bit data bus
Data Mask DQM0-DQM3 Input Byte-wise data mask (4 bytes)
Control CS, RAS, CAS, WE, CKE Input Chip select, command inputs, clock enable
Clock CLK Input System clock (rising edge triggered)
Power VDD/VDDQ, VSS/VSSQ Power/Ground 3.3V supply and ground
Application Scenarios: In which products and applications is IS42S32200L-6TL used
Application Circuit Role Key Requirement
Networking Buffer Packet buffer memory 2Mx32, 166MHz, 667 MB/s
Embedded System Working RAM for MCU/MPU 64Mbit, 3.3V, LVTTL
Video Frame Buffer Display line buffer 32-bit wide, 166MHz, burst
Printer Memory Page buffer 2Mx32, auto refresh, 86-TSOP
Industrial Control Data acquisition buffer 3.3V, 166MHz, self refresh
Alternative Models: What chips are recommended as replacements for IS42S32200L-6TL
Model Manufacturer Key Difference
IS42S32200L-5TL ISSI Faster speed grade (200MHz)
IS42S32200L-6BL ISSI 90-ball BGA package instead of TSOP
IS42S16160J-6TL ISSI 16-bit wide variant (1Mx16x4)
W9812G6JH-6 Winbond Equivalent 64Mbit SDRAM (2Mx4x4B)
MT48LC8M32B2-6A Micron Equivalent 64Mbit SDRAM (2Mx32)

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1