Opens in a new tab

MAX30003CWV+T

Ultra-low power ECG AFE, 15.5-bit, R-R detection, 85uW, 30-bump WLP (2.7×2.9mm), wearable grade

9232

Effective Inventory

Image for reference only

Manufacturer Part:

MAX30003CWV+T

Package:

30-bump WLP (2.7 x 2.9 mm, 0.4mm pitch)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX30003CWV+T is an ultra-low power, single-channel integrated biopotential analog front-end (AFE) from Analog Devices (formerly Maxim Integrated), designed for ECG (electrocardiogram) and R-to-R heart rate detection in wearable applications. It features 15.5-bit effective resolution with 5uVp-p noise, built-in R-R detection algorithm, and operates on just 85uW at 1.1V. The CWV package is a 30-bump wafer-level package (WLP) measuring 2.7 x 2.9mm.

Key Specifications

Channels 1 biopotential (ECG)
Effective Resolution 15.5 bits
Input Noise 5 uVp-p
CMRR >100 dB
Input Impedance >500 MOhm
DC Offset Range +/-650 mV
AC Dynamic Range 65 mVp-p
Power Consumption 85 uW at 1.1V
Shutdown Current 0.5 uA (typ)
Interface SPI (up to 20 MHz)
FIFO Depth 32 words
Package 30-bump WLP (2.7 x 2.9 mm)
Operating Temperature 0C to +70C (Commercial)

Features

  • Clinical-grade ECG AFE with 15.5-bit resolution
  • Built-in R-R heart rate detection with interrupt output
  • Ultra-low 85uW power consumption for wearable applications
  • High CMRR >100dB with fully differential input
  • High input impedance >500MOhm for dry electrode compatibility
  • Leads-on detection for automatic MCU wake-up
  • 32-word FIFO for efficient data batching

Applications

  • Wearable ECG chest strap monitors
  • Single-lead wireless patches for arrhythmia detection
  • Fitness heart rate monitoring bands
  • Bio-authentication ECG-on-demand
  • Hospital-grade ambulatory ECG monitors
Product Introduction: MAX30003CWV+T Product Introduction

The MAX30003CWV+T is an ultra-low power single-channel biopotential AFE from Analog Devices, designed for wearable ECG and heart rate monitoring. It achieves clinical-grade 15.5-bit effective resolution with just 5uVp-p input noise, while consuming only 85uW at 1.1V supply. The built-in R-R heart rate detector with configurable interrupts eliminates the need to run HR algorithms on the host MCU, significantly reducing system power. The 30-bump WLP package (2.7×2.9mm) is optimized for space-constrained wearable designs.

Working Principle: MAX30003CWV+T Working Principle

The MAX30003CWV+T operates as a fully integrated ECG analog front-end. The biopotential channel receives differential ECG signals at the ECGP and ECGN pins, which first pass through ESD protection and EMI filtering. The fast-settling input amplifier with high input impedance (>500MOhm) amplifies the microvolt-level ECG signal while rejecting common-mode interference (CMRR >100dB). A programmable gain amplifier (PGA) further conditions the signal before an anti-aliasing filter (AAF, -3dB at 600Hz). The signal then enters a high-resolution sigma-delta ADC with programmable decimation filter. The R-R detector algorithm runs on the digitized ECG waveform, identifying QRS complexes and outputting heart rate data via the INTB interrupt pin. The 32-word FIFO allows the host MCU to remain in deep sleep until enough data accumulates, reducing overall system power consumption. DC lead-off detection uses a 0.7uA current source to monitor electrode connectivity.

Pin Description: MAX30003CWV+T Pin Definition and Functions
Pin Name Type Function
A1 ECGP Analog Input ECG positive differential input
B1 ECGN Analog Input ECG negative differential input
C2 VCM Analog Output Common-mode voltage output for right-leg drive
D3 CSB Digital Input SPI chip select (active low)
E3 SCLK Digital Input SPI clock input
D4 SDI Digital Input SPI data input (MOSI)
E4 SDO Digital Output SPI data output (MISO)
C5 INTB Digital Output Interrupt output (active low), R-R detect / FIFO
B5 INT2B Digital Output Second interrupt output
A3/A4 AVDD, DVDD Power Analog 1.1V, Digital 1.8V supply
Application Scenarios: In which products and applications is MAX30003CWV+T used
Application Circuit Role Key Requirement
Wearable ECG Patch Single-lead ECG AFE 85uW, 15.5-bit, R-R detect, WLP
Chest Strap HR Monitor Heart rate detection only R-R detect interrupt, 0.5uA standby
Holter Monitor Ambulatory ECG recording 15.5-bit, 32-word FIFO, clinical grade
Smartwatch ECG On-demand ECG measurement WLP package, dry electrode support
Medical IoT Remote patient monitoring Low power, SPI interface, FIFO batching
Alternative Models: What chips are recommended as replacements for MAX30003CWV+T
Model Manufacturer Key Difference
MAX30001CTI+ Analog Devices Multi-channel version (ECG+BioZ)
MAX30003CTI+ Analog Devices Same AFE, 28-pin TQFN package
AFE5404 Texas Instruments 4-channel ECG AFE, higher power
ADS1292R Texas Instruments 2-channel ECG/Respiration AFE, 24-bit
AD8233ACBZ Analog Devices Single-lead ECG analog front-end, lower cost

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1