Opens in a new tab

SMF5.0A

5V 200W TVS diode, unidirectional, SOD-123FL

12422

Effective Inventory

Image for reference only

Manufacturer Part:

SMF5.0A

Package:

SOD-123FL (3.7 x 1.6 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMF5.0A is a 200 W unidirectional transient voltage suppression (TVS) diode in a SOD-123FL package, designed to protect 5 V circuits from ESD, EFT, and surge transients. As the 5 V variant of the SMF series, it provides the same form factor and protection capability as the SMF12A but optimized for 5 V logic and USB power rails.

Key Specifications

Standoff Voltage (Vrwm) 5.0 V
Breakdown Voltage (Vbr) 6.0 – 7.3 V @ 1mA
Clamping Voltage (Vc) 9.2 V @ Ipp=21.7A (typical)
Peak Pulse Power (Pppm) 200 W (10/1000 us)
Polarity Unidirectional
Leakage Current 800 uA max @ 5V (typical)
Package SOD-123FL
Operating Temperature -55 to +150 deg C

Features

  • 5.0 V standoff for 5V logic and USB protection
  • 200 W peak pulse power handling
  • Low clamping voltage for effective 5V rail protection
  • Same SOD-123FL package as SMF12A
  • Unidirectional for DC power rail protection
  • RoHS compliant

Applications

  • 5 V USB port ESD and surge protection
  • MCU 5 V VCC rail overvoltage protection
  • HDMI 5 V line protection
  • Smartphone and tablet power port protection
Product Introduction: SMF5.0A Product Introduction

The SMF5.0A is a 200 W unidirectional TVS diode in a SOD-123FL package designed to protect 5 V circuits. With 5.0 V standoff voltage and clamping voltage around 9.2 V at rated current, it shields 5 V logic, USB power rails, and MCU VCC pins from ESD and surge damage. The SOD-123FL package provides a low-profile footprint for dense PCB layouts in consumer electronics.

Working Principle: SMF5.0A Working Principle

The SMF5.0A operates on the same avalanche principle as the SMF12A but with a lower breakdown voltage optimized for 5 V rail protection. The lower voltage Zener structure results in higher leakage current (up to 800 uA at standoff) compared to the 12 V variant, which is an inherent characteristic of low-voltage TVS devices. The clamping voltage of approximately 9.2 V at full pulse current provides effective protection for 5 V CMOS logic with its absolute maximum rating of typically 7 V. The TVS response time is sub-nanosecond, faster than conventional Zener diodes due to the optimized avalanche structure.

Pin Description: SMF5.0A Pin Definition and Functions
Pin Name Type Function
1 Cathode Output Cathode (marked with band)
2 Anode Ground Anode (connects to ground)
Application Scenarios: In which products and applications is SMF5.0A used
  • 5 V USB port ESD and surge protection
  • MCU 5 V VCC rail overvoltage protection
  • HDMI 5 V line protection
  • Smartphone and tablet power port protection
Alternative Models: What chips are recommended as replacements for SMF5.0A
Manufacturer Part Number Package Notes
Littelfuse SMF5.0A SOD-123FL Original manufacturer
Diotec SMF5.0A SOD-123FL Second-source
onsemi SMBJ5.0A SMB Higher power 600W alternative
Bourns CDSOD323-T05C SOD-323 5V alternative in SOD-323

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1