Opens in a new tab

MAX13020ASA+T

ADI ±60V fault-protected LIN transceiver, 20 kbaud, 5-38V, 4uA sleep, 8-SOIC, pin-to-pin TJA1020 upgrade

10975

Effective Inventory

Image for reference only

Manufacturer Part:

MAX13020ASA+T

Package:

8-SOIC (3.9 x 4.9 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX13020ASA+T from Analog Devices (Maxim Integrated) is a ±60V fault-protected LIN (Local Interconnect Network) transceiver designed for automotive in-vehicle subnetworks. It provides the interface between the LIN protocol controller and the physical bus, supporting LIN 2.0 and SAE J2602 specifications with industry-leading fault protection.

Key Specifications

Protocol LIN 2.0 / SAE J2602
Data Rate Up to 20 kbaud
Supply Voltage 5V to 38V (BAT pin)
LIN Bus Fault Protection ±60V continuous
ESD Protection ±12 kV HBM, ±4 kV contact discharge (LIN)
Sleep Current 4 uA
Termination Integrated 30 kΩ for slave applications
Operating Temp -40°C to +125°C
Package 8-pin SOIC (3.9 x 4.9 mm)

Features

  • ±60V fault protection on LIN bus — the most robust LIN transceiver in the industry
  • Pin-to-pin compatible replacement for Philips TJA1020
  • Integrated 30 kΩ termination resistor for slave node applications
  • 4 uA sleep mode with local and remote wake-up detection
  • Slew-rate limited transmitter for low electromagnetic emissions (EME)

Applications

  • 12V automotive body electronics (door, seat, mirror control)
  • 24V heavy truck and bus LIN subnetworks
  • 42V automotive systems
  • Automotive lighting control modules
  • Industrial LIN-based sensor networks
Product Introduction: MAX13020ASA+T Product Introduction

The MAX13020ASA+T is an Analog Devices (Maxim) ±60V fault-protected LIN transceiver providing the physical layer interface between a LIN protocol controller and the bus wire. Supporting LIN 2.0 and SAE J2602, it offers the industry’s most robust LIN bus protection at ±60V continuous, suitable for 12V, 24V, and 42V automotive networks. With 4 uA sleep current, integrated 30 kΩ slave termination, and slew-rate limited transmission, it serves as a pin-to-pin upgrade for the TJA1020.

Working Principle: MAX13020ASA+T Working Principle

The MAX13020ASA+T operates in three modes: (1) Normal Slope Mode — NSLP high and TXD high for 20 kbaud communication with slew-rate limited transmitter for low EME. TXD input drives the LIN bus via the transmitter, while RXD reports bus state to the controller; (2) Low Slope Mode — NSLP high and TXD low for up to 10.4 kbaud with additional slew-rate limiting for further reduced EME in sensitive environments; (3) Sleep Mode — NSLP low disables transmitter and receiver for 4 uA supply current. Wake-up sources are detected on LIN bus (remote) or NWAKE pin (local), with source recognition reported on RXD upon wake-up.

Pin Description: MAX13020ASA+T Pin Definition and Functions
Pin Name Function
1 NWAKE Local wake-up input (active low)
2 TXD Transmit data input from controller
3 RXD Receive data output to controller
4 NSLP Sleep/enable control input (active low)
5 GND Ground
6 LIN LIN bus connection (±60V tolerant)
7 BAT Battery supply (5V to 38V)
8 INH Inhibit output for voltage regulator control
Application Scenarios: In which products and applications is MAX13020ASA+T used
  • 12V automotive door module LIN slave with seat/switch control
  • 24V heavy truck cabin LIN subnetwork for lighting and climate
  • Automotive HVAC blower speed control LIN node
  • Motorcycle body electronics LIN network with 4uA sleep current
  • Industrial sensor LIN bus node in high-noise environment
Alternative Models: What chips are recommended as replacements for MAX13020ASA+T
Model Manufacturer Key Difference
MAX13021ASA+T ADI BUS dominant management added
TJA1020T NXP Original device, less fault protection
TJA1021T NXP Next-gen LIN transceiver
ATA6624 Microchip LIN transceiver with integrated Vreg
NCV7321 onsemi Alternative LIN 2.0 transceiver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1