Opens in a new tab

TB6559FG,8,EL

Full-bridge DC motor driver, 10-30V, 2.5A peak, integrated LDMOS, HSOP16, for brushed motor drive

10689

Effective Inventory

Image for reference only

Manufacturer Part:

TB6559FG,8,EL

Package:

HSOP16-P-300-1.00 (13.5 x 6.4 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TB6559FG is a Toshiba full-bridge brushed DC motor driver IC with integrated LDMOS output transistors in an HSOP16 package. Rated for up to 2.5A peak output current at 10-30V supply, it provides forward/reverse/brake/stop operation modes with constant-current or direct PWM control for office automation and industrial motor drive applications.

Key Specifications

Supply Voltage 10V to 30V (50V absolute max)
Output Current (Peak) 2.5A
Output Current (Average) 1.0A
On-Resistance (total) 1.3 Ω typical (high+low)
Control Modes CW, CCW, Short Brake, Stop, Standby
Control Method Constant-current PWM or Direct PWM
PWM Frequency Up to 100 kHz
Protection Overcurrent, thermal shutdown
Operating Temperature -30°C to +85°C
Package HSOP16-P-300-1.00 (with heat sink tab)

Features

  • Full-bridge driver with integrated high-side P-ch and low-side N-ch MOSFETs
  • Four operation modes: CW, CCW, short brake, and stop via IN1/IN2 logic inputs
  • Dual control: constant-current chopper (Vref 0-3V) or direct PWM (Vref 4.5-5.5V)
  • Standby mode via SB pin reduces power consumption when motor is idle
  • Overcurrent and thermal shutdown protection with ALERT fault output
  • HSOP16 package with exposed heat sink tab for efficient thermal dissipation

Applications

  • Printer paper feed and carriage motor drive
  • Office automation equipment motor control
  • Industrial small DC motor forward/reverse drive
  • Vending machine dispenser motor driver
  • Consumer appliance motor speed control
Product Introduction: TB6559FG,8,EL Product Introduction

The TB6559FG is a Toshiba full-bridge brushed DC motor driver IC integrating P-ch high-side and N-ch low-side MOSFETs in an HSOP16 surface-mount package with exposed heat sink tab. Supporting 10V to 30V supply voltage and up to 2.5A peak output current (1.0A average), the device provides forward (CW), reverse (CCW), short brake, and stop operation modes controlled by IN1/IN2 logic inputs. The control method is selectable between constant-current chopper mode (Vref 0-3V) and direct PWM mode (Vref 4.5-5.5V), with overcurrent and thermal shutdown protection plus an ALERT fault output pin.

Working Principle: TB6559FG,8,EL Working Principle

The TB6559FG uses a full H-bridge configuration with four integrated MOSFET switches (two P-ch high-side, two N-ch low-side). The IN1 and IN2 CMOS/TTL-compatible inputs select the operation mode: IN1=H/IN2=L drives the motor forward (CW), IN1=L/IN2=H drives reverse (CCW), IN1=H/IN2=H applies short brake, and IN1=L/IN2=L enters stop mode. In constant-current mode (Vref 4.5V), an external PWM signal is applied to the OSC/PWM pin for direct speed control.

Pin Description: TB6559FG,8,EL Pin Definition and Functions
Pin Function
Pin 1 (OUT1) Motor output 1
Pin 2 (VREF) Reference voltage input for current setting / mode select
Pin 3 (OSC/PWM) Oscillator capacitor / PWM input
Pin 4 (GND) Ground
Pin 5 (IN1) Logic input 1 (CW/CCW/Brake/Stop)
Pin 6 (IN2) Logic input 2 (CW/CCW/Brake/Stop)
Pin 7 (SB) Standby control (H=operating, L=standby)
Pin 8 (ALERT) Fault output (5V=protection active, 0V=normal)
Pin 9 (VM) Motor power supply (10-30V)
Pin 10 (VREG) 5V internal regulator output
Pin 16 (OUT2) Motor output 2
Heat Tab Thermal pad (connect to GND plane)
Application Scenarios: In which products and applications is TB6559FG,8,EL used
  • Thermal printer paper feed motor driver with constant-current control
  • Inkjet printer carriage motor forward/reverse drive
  • Office scanner scan head motor driver with PWM speed control Vending machine product dispenser motor bidirectional driver
  • Consumer appliance damper/valve actuator motor control
Alternative Models: What chips are recommended as replacements for TB6559FG,8,EL
Model Manufacturer Key Difference
TB6612FNG Toshiba Dual H-bridge, lower voltage (15V max)
TB67H450FNG Toshiba Single H-bridge, 50V, 3.5A
DRV8871DDAR Texas Instruments Single H-bridge, 45V, 3.6A
L9110S UTC Low-cost dual H-bridge, 12V, 800mA
A4950ELJTR-T Allegro Single H-bridge, 40V, 2A

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1