Opens in a new tab

BTT6200-4EMA

Quad-channel 200mΩ PROFET+ 24V smart high-side switch, 1A/ch, AEC-Q100, PG-SSOP-24 EP

11118

Effective Inventory

Image for reference only

Manufacturer Part:

BTT6200-4EMA

Package:

PG-SSOP-24-14 EP (Exposed Pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BTT6200-4EMA from Infineon Technologies is a quad-channel smart high-side power switch from the PROFET+ 24V family, designed for 24 V truck and transportation systems. With a 200 mΩ on-resistance per channel and 1 A nominal load current per channel (all channels active), it integrates comprehensive diagnostic and protection features including proportional current sense, over-temperature latch, short-circuit protection, and open-load detection, housed in a PG-SSOP-24-14 EP exposed-pad package.

Key Specifications

Channels 4 (quad)
Operating Voltage 5 V to 36 V
Max Supply Voltage 65 V (load dump)
RDS(ON) per Channel 200 mΩ @ 25°C, 400 mΩ @ 150°C
Nominal Load Current (all ch) 1 A per channel
Short Circuit Current Limit 9 A minimum
Standby Current 500 nA max @ 25°C
Current Sense Ratio (kILIS) 300 typical
Operating Temperature -40°C to 150°C
Package PG-SSOP-24-14 EP
Qualification AEC-Q100, ISO 26262-ready

Features

  • Quad-channel high-side switch with 200 mΩ per channel for 24 V truck applications
  • Proportional analog current sense (kILIS = 300) for precise load monitoring and LED diagnosis
  • Over-temperature protection with latch-off for fault safety
  • Open-load detection in both ON and OFF states with short-circuit to battery/ground indication
  • 3.3 V and 5 V compatible logic inputs with diagnostic enable and channel selection

Applications

  • 24 V truck body control modules (BCM) driving lamps and LEDs
  • Automotive secondary fuse box and power distribution units
  • ADAS domain controller peripheral power switching
  • Industrial 24 V load control with diagnostic feedback
  • Agricultural and construction vehicle lighting systems
Product Introduction: BTT6200-4EMA Product Introduction

The BTT6200-4EMA is an Infineon PROFET+ 24V family quad-channel smart high-side power switch fabricated in Smart6 HV technology. Each channel features a 200 mΩ N-channel vertical power MOSFET with charge pump, capable of driving loads such as R10W 24V lamps or R5W 12V lamps and LEDs. The device integrates proportional load current sense multiplexed across all four channels with a typical sense ratio of 300 (kILIS), enabling precise diagnosis of even small LED loads. Comprehensive protection includes over-temperature latch, short-circuit current limitation (9 A min), open-load detection in both ON and OFF states, and reverse polarity protection with external components. The device is AEC-Q100 qualified and ISO 26262-ready for automotive functional safety applications.

Working Principle: BTT6200-4EMA Working Principle

The BTT6200-4EMA operates through four parallel high-side switch channels: (1) Power Stage — each channel uses an N-channel vertical power MOSFET with an integrated charge pump to drive the gate above the supply rail, enabling high-side switching of loads connected to ground; (2) Diagnostic Subsystem — a multiplexed current sense circuit mirrors a proportional fraction (1/300) of each channel’s load current to the IS pin, selected by DSEL0/DSEL1 digital inputs, enabling the MCU to monitor each channel’s load status; (3) Protection Logic — over-temperature sensors per channel trigger latch-off when junction temperature exceeds threshold, short-circuit detection limits current to 9 A minimum, and open-load comparators detect both disconnected loads (OFF state via pull-up) and short-circuit to battery/ground conditions; (4) Control Interface — 3.3 V / 5 V compatible logic inputs (IN0–IN3) switch individual channels, while DEN enables the diagnostic output.

Pin Description: BTT6200-4EMA Pin Definition and Functions
Pin Symbol Function
2 IN0 Input signal for channel 0 activation
4 GND Ground connection
5 IN1 Input signal for channel 1 activation
6 DEN Diagnostic enable (active high)
7 IS Current sense output (analog, proportional)
8 DSEL0 Diagnostic channel select bit 0
9 IN2 Input signal for channel 2 activation
10 IN3 Input signal for channel 3 activation
11 DSEL1 Diagnostic channel select bit 1
13 OUT3 Protected high-side output channel 3
17 OUT0 Protected high-side output channel 0
20 OUT1 Protected high-side output channel 1
22 VS Supply voltage (battery)
24 OUT2 Protected high-side output channel 2
Application Scenarios: In which products and applications is BTT6200-4EMA used
  • 24 V truck BCM driving four R10W lamp channels with individual current monitoring and fault detection
  • Construction vehicle LED lighting controller with open-load diagnosis for each lamp string ADAS domain controller peripheral power distribution with ISO 26262 functional safety Industrial 24 V automation I/O module switching solenoid valves with short-circuit protection Agricultural equipment multi-channel lamp driver with over-temperature latch for harsh environments
Alternative Models: What chips are recommended as replacements for BTT6200-4EMA
Model Manufacturer Key Difference
BTT6200-4ESA Infineon Newer PG-TSDSO-24 package, ISO 26262-ready, 48V extended
BTH6200-4ESA Infineon 48 V board net version, up to 60 V operating
BTS6200-4ESA Infineon Earlier generation PROFET+ 24V quad switch
TLE8240SA Infineon Quad low-side switch alternative
NCV84160 onsemi Quad smart high-side switch, 24 V automotive

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1