Opens in a new tab

SMBJ120A

600W unidirectional TVS diode, 120V standoff, 193V clamp, DO-214AA (SMB)

11312

Effective Inventory

Image for reference only

Manufacturer Part:

SMBJ120A

Package:

DO-214AA (SMB)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMBJ120A is a 600 W surface-mount transient voltage suppressor (TVS) diode in a DO-214AA (SMB) package, designed to protect sensitive electronics from voltage transients induced by lightning and other transient events. With a reverse standoff voltage of 120 V and a maximum clamping voltage of 193 V at 3.1 A peak pulse current, it is suitable for protecting 120 V nominal bus lines and telecom interfaces.

Key Specifications

Reverse Standoff Voltage (VRWM) 120 V
Breakdown Voltage (VBR) 133 V min / 147 V max
Maximum Clamping Voltage (VC) 193 V @ IPP = 3.1 A
Peak Pulse Power (10/1000 µs) 600 W
Peak Pulse Current (IPP) 3.1 A
Reverse Leakage (IR) 1 µA max @ VRWM
Polarity Unidirectional
Operating Temperature -65°C to 150°C
Package DO-214AA (SMB)
ESD Rating IEC 61000-4-2: 15 kV Air / 8 kV Contact

Features

  • 600 W peak pulse power dissipation at 10/1000 µs waveform
  • Low incremental surge resistance for excellent clamping capability
  • Fast response time: typically less than 1.0 ps from 0 V to BV min
  • Glass passivated chip junction for reliable operation
  • Typical failure mode is short circuit for fail-safe protection
  • IEC 61000-4-2 ESD protection: 15 kV air, 8 kV contact

Applications

  • Telecom line card transient protection
  • 120 V DC bus protection in industrial power supplies
  • Automotive 24 V/48 V system overvoltage protection
  • Consumer electronics input port ESD/surge protection
  • LED lighting driver transient suppression
Product Introduction: SMBJ120A Product Introduction

The SMBJ120A is a 600 W transient voltage suppressor diode from the Littelfuse SMBJ series, designed for surface-mount applications to protect sensitive electronic equipment from voltage transients induced by lightning and other transient events. The unidirectional device has a reverse standoff voltage of 120 V and clamps transients to a maximum of 193 V at 3.1 A peak pulse current. The glass passivated chip junction ensures reliable operation, while the typical failure mode is a short circuit, providing fail-safe protection. The DO-214AA (SMB) package offers a low-profile surface-mount footprint optimized for board space.

Working Principle: SMBJ120A Working Principle

The SMBJ120A operates as a voltage-clamping device: (1) Normal Operation — below the reverse standoff voltage (120 V), the TVS diode presents a very high impedance (leakage < 1 µA), effectively invisible to the protected circuit; (2) Transient Event — when a voltage spike exceeds the breakdown voltage (133–147 V), the device avalanches and conducts heavily, clamping the voltage across its terminals to the maximum clamping voltage (193 V at 3.1 A), thereby diverting surge energy away from the protected load; (3) Recovery — after the transient subsides, the device returns to its high-impedance state. The unidirectional configuration provides clamping for positive transients and forward diode conduction for negative transients. The 600 W peak pulse power rating at 10/1000 µs waveform ensures sufficient energy absorption for typical surge events.

Pin Description: SMBJ120A Pin Definition and Functions
Pin Function
Cathode (band side) Positive terminal — connect toward the protected line
Anode Negative terminal — connect toward ground
Application Scenarios: In which products and applications is SMBJ120A used
  • Telecom line card protecting SLIC circuits from lightning-induced surges on 120 V tip/ring lines
  • Industrial 120 V DC bus protection against load-dump and switching transients
  • Automotive 48 V mild-hybrid bus overvoltage protection with 15 kV ESD rating
  • Consumer electronics AC/DC power adapter output transient suppression
  • LED street lighting driver input protection against surge events per IEC 61000-4-5
Alternative Models: What chips are recommended as replacements for SMBJ120A
Model Manufacturer Key Difference
SMBJ120CA Littelfuse Bidirectional version for AC signal protection
SMAJ120A Littelfuse 400 W version in smaller DO-214AC (SMA) package
SMCJ120A Littelfuse 1500 W version in larger DO-214AB (SMC) package
P6KE120A Various 600 W through-hole alternative in DO-15 package
1.5SMC120A STMicroelectronics 1500 W SMC alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1