Opens in a new tab

SKY66101-11

902-928 MHz ISM RF front-end module with integrated PA+LNA, 2.0-4.8V, QFN

7613

Effective Inventory

Image for reference only

Manufacturer Part:

SKY66101-11

Package:

QFN

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SKY66101-11 from Skyworks Solutions is a high-performance, highly integrated RF front-end module (FEM) designed for high-power ISM band applications operating in the 902–928 MHz frequency range. It integrates a power amplifier (PA), low-noise amplifier (LNA) with bypass mode, and RF matching in a compact QFN package, with fully matched 50 Ω input and output for ease of design.

Key Specifications

Frequency Range 902–928 MHz
PA Output Power High linear output for ISM
LNA Noise Figure Low noise figure with bypass mode
Supply Voltage 2.0 V to 4.8 V (RF), 1.6 V to 3.6 V (digital)
PA Input/Output 50 Ω matched
Digital Controls 1.6–3.6 V CMOS compatible
Package QFN (compact)
Operating Temperature -40°C to 85°C

Features

  • Fully integrated PA + LNA with bypass in a single FEM
  • Fully matched 50 Ω input and output — no external matching required
  • Wide supply voltage range (2.0–4.8 V) for battery-powered applications 1.6–3.6 V CMOS-compatible digital controls Optimized for high-power ISM band transmitters and receivers

    Applications

    • 900 MHz ISM band IoT and M2M communication modules
    • Smart metering and utility infrastructure wireless nodes
    • Industrial telemetry and SCADA radio links
    • LoRa and LPWAN gateway and endpoint radios
    • Home automation and security wireless systems
Product Introduction: SKY66101-11 Product Introduction

The SKY66101-11 from Skyworks Solutions is a high-performance RF front-end module (FEM) designed for high-power Industrial, Scientific, Medical (ISM) band applications in the 902–928 MHz frequency range. The module integrates a power amplifier (PA) with high linear output power, a low-noise amplifier (LNA) with bypass mode for receive sensitivity enhancement, and all necessary RF matching networks in a compact QFN surface-mount package. Both the PA input/output and LNA input/output are matched to 50 Ω, eliminating the need for external matching components. The RF blocks operate over a wide 2.0–4.8 V supply range suitable for battery-powered applications, while digital controls are compatible with 1.6–3.6 V CMOS logic levels.

Working Principle: SKY66101-11 Working Principle

The SKY66101-11 operates as an integrated RF front-end with transmit and receive paths: (1) Transmit Path — the PA amplifies the low-power RF input signal from the transceiver IC to the required output power level, with the integrated output match delivering the amplified signal to the 50 Ω antenna; (2) Receive Path — the LNA amplifies the weak received signal from the antenna with low noise figure, improving receiver sensitivity; the bypass mode routes the signal around the LNA for strong-signal conditions, reducing current consumption and preventing LNA saturation; (3) Mode Control — digital control pins (compatible with 1.6–3.6 V CMOS) select between transmit, receive (LNA), and bypass modes, with fast TX/RX switching for half-duplex ISM protocols; (4) Power Management — the wide supply voltage range (2.0–4.8 V) allows the FEM to operate across the battery discharge curve without a dedicated voltage regulator.

Pin Description: SKY66101-11 Pin Definition and Functions
Pin Function
RF_IN PA input (50 Ω matched)
RF_OUT / ANT PA output / LNA input (50 Ω matched to antenna)
LNA_OUT LNA output to transceiver IC
VDD_PA PA supply voltage (2.0–4.8 V)
VDD_LNA LNA supply voltage (2.0–4.8 V)
TX_EN Transmit enable (CMOS)
RX_EN Receive enable (CMOS)
GND Ground
Application Scenarios: In which products and applications is SKY66101-11 used
  • LoRa endpoint radio module with high-power 915 MHz transmitter and sensitive LNA receiver
  • Smart electric meter 900 MHz radio with FEM for extended range AMI communication
  • Industrial IoT sensor node with battery-powered ISM radio operating across 2.0–4.8 V supply
  • Building automation wireless thermostat using 902–928 MHz ISM link with PA+LNA front-end
  • Agricultural monitoring gateway with high-output-power 915 MHz ISM transmitter
Alternative Models: What chips are recommended as replacements for SKY66101-11
Model Manufacturer Key Difference
SKY66112-11 Skyworks Dual-band variant with additional frequency support
RFPA2172TR13 Qorvo 900 MHz PA without integrated LNA
RFX2401C RFaxis 2.4 GHz ISM FEM alternative
CC1190 TI 900 MHz range extender (PA+LNA+switch)
SE2431L Skyworks Zigbee/ISM FEM with similar integration

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1