Opens in a new tab

CH9102F

Single-channel USB to UART bridge, 2 Mbps, SOP-16, integrated 3.3V LDO, low cost

4568

Effective Inventory

Image for reference only

Manufacturer Part:

CH9102F

Package:

SOP-16

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CH9102F from Nanjing Qinheng Microelectronics (WCH) is a single-channel USB to UART bridge converter chip in a compact SOP-16 package. Supporting USB full-speed (12 Mbps) with data transfer rates up to 2 Mbps on the UART side, it provides a cost-effective solution for adding USB serial connectivity to embedded systems, development boards, and debug interfaces.

Key Specifications

USB Interface USB 2.0 Full-Speed (12 Mbps)
UART Baud Rate Up to 2 Mbps
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Mark, Space
GPIO Configurable I/O pins
Supply Voltage 3.3 V (integrated 3.3 V LDO from USB 5 V)
Package SOP-16
Operating Temperature -40°C to 85°C
Drivers Windows, Linux, macOS, Android

Features

  • Single-channel USB to UART bridge in compact SOP-16 package
  • Built-in 3.3 V LDO regulator — can be powered directly from USB 5 V
  • Configurable UART parameters for maximum protocol flexibility
  • Supports modem handshake signals (RTS, CTS, DTR, DSR, DCD, RI)
  • Low cost alternative to FTDI FT232 series for basic USB-UART applications
  • Free VCP drivers for major operating systems

Applications

  • USB-to-serial debug adapters for MCU development
  • Embedded system console port connectivity
  • Arduino and development board USB serial interface
  • Industrial equipment serial port expansion
  • IoT device firmware programming interface
Product Introduction: CH9102F Product Introduction

The CH9102F from WCH (Nanjing Qinheng Microelectronics) is a single-channel USB to UART bridge converter chip. It provides a cost-effective solution for converting USB to a standard UART serial port, with data rates up to 2 Mbps. The device integrates a 3.3 V LDO regulator that can be powered directly from the USB 5 V supply, simplifying external component requirements. It supports full modem handshake signals (RTS, CTS, DTR, DSR, DCD, RI) and configurable UART parameters (data bits, stop bits, parity). WCH provides free Virtual COM Port (VCP) drivers for Windows, Linux, macOS, and Android, enabling rapid integration into existing serial communication software.

Working Principle: CH9102F Working Principle

The CH9102F operates as a USB-to-UART protocol bridge: (1) USB Interface — the device enumerates as a USB CDC-ACM device (Virtual COM Port), receiving USB data packets from the host computer at USB full-speed (12 Mbps); (2) Protocol Conversion — the USB data is unpacked from CDC-ACM frames and converted to standard UART format (configurable baud rate up to 2 Mbps, data/stop/parity bits); (3) UART Transmit/Receive — converted data is shifted out on the TX pin with the configured UART timing, while received data on the RX pin is packed into USB frames and sent to the host; (4) Flow Control — hardware flow control signals (RTS/CTS, DTR/DSR) are mapped between USB control signals and UART handshake pins for reliable data transfer at high baud rates.

Pin Description: CH9102F Pin Definition and Functions
Pin Name Function
1 GND Ground
2 TXD UART transmit data output
3 RXD UART receive data input
4 V3 Internal 3.3 V LDO output / external 3.3 V input
5 UD+ USB D+ signal
6 UD- USB D- signal
7 VIN USB 5 V input (powers internal LDO)
8 RTS Request to Send (modem output)
9 DTR Data Terminal Ready (modem output)
10 CTS Clear to Send (modem input)
11 DSR Data Set Ready (modem input)
12 DCD Data Carrier Detect (modem input)
13 RI Ring Indicator (modem input)
14 GPIO0 Configurable general-purpose I/O
15 GPIO1 Configurable general-purpose I/O
16 VDD 3.3 V power supply
Application Scenarios: In which products and applications is CH9102F used
  • MCU development board USB serial debug port with DTR auto-reset for Arduino-style programming
  • IoT device firmware update interface using USB-UART bridge at 2 Mbps for fast binary downloads
  • Industrial equipment serial console adapter replacing legacy RS-232 ports with USB connectivity
  • Portable USB-to-UART cable adapter for field service technicians debugging embedded systems
  • 3D printer controller board USB interface with RTS/DTR for automatic bootloader entry
Alternative Models: What chips are recommended as replacements for CH9102F
Model Manufacturer Key Difference
CH340G WCH Older generation WCH USB-UART, more pins
CH9102X WCH Same function in MSOP-10 package
FT232RL FTDI Industry standard, higher cost, more features
CP2102N Silicon Labs Competitive USB-UART bridge, QFN-24
PL2303TA Prolific Budget USB-UART alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1