Opens in a new tab

HCPL-316J-500E

2.5A IGBT gate drive optocoupler, 5kVrms isolation, UVLO, Miller clamp, 16-SMD DIP, T&R

9120

Effective Inventory

Image for reference only

Manufacturer Part:

HCPL-316J-500E

Package:

16-Lead Surface Mount DIP (10.54 x 7.62 x 4.57 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HCPL-316J-500E is a 2.5A gate drive optocoupler from Broadcom (formerly Avago Technologies) designed for driving IGBTs and power MOSFETs in motor control and power conversion applications. This optically isolated gate driver provides 1.5kVpeak galvanic isolation with an under-voltage lock-out (UVLO) feature and active Miller clamp protection. The 500E suffix indicates tape and reel packaging in a 16-lead surface mount DIP package rated for -40°C to +100°C.

Key Specifications

Peak Output Current 2.5 A
Isolation Voltage 5000 Vrms (1.5kVpeak)
Supply Voltage (VCC) 15V to 30V
Propagation Delay 300 ns (Max)
CMRR 50 kV/μs (Min)
UVLO Threshold 10.0V (Typ)
Miller Clamp On Voltage 2.5V (Typ)
LED Forward Current 25 mA (Max recommended)
Package 16-Lead Surface Mount DIP
Operating Temperature -40°C to +100°C
Packing Tape & Reel (500E)

Features

  • 2.5A peak output current for direct IGBT/MOSFET gate drive
  • Optically isolated with 5000Vrms isolation rating
  • Built-in under-voltage lock-out (UVLO) protects IGBT from insufficient gate voltage
  • Active Miller clamp prevents parasitic turn-on during high dv/dt transitions
  • Fault status feedback through isolated fault output
  • Desaturation detection and fault reporting for IGBT protection
  • 50kV/μs common mode rejection for noisy environments

Applications

  • AC and brushless DC motor drives
  • Industrial inverters and servo drives
  • Switching power supplies and UPS systems
  • Solar inverter IGBT gate drive
  • Welding equipment power stage
Product Introduction: HCPL-316J-500E Product Introduction

The Broadcom HCPL-316J-500E is a highly integrated gate drive optocoupler that combines an AlGaAs LED with an integrated photodetector and gate driver IC in a single optically isolated package. Designed specifically for driving IGBTs and power MOSFETs, it provides 2.5A peak output current with 5000Vrms galvanic isolation between input and output. The device features under-voltage lock-out (UVLO) that disables the gate drive output when the supply voltage drops below the threshold, preventing IGBT operation in the linear region. The active Miller clamp eliminates the need for a negative gate drive supply by clamping the gate voltage during high dv/dt switching transients. Desaturation detection monitors the IGBT collector-emitter voltage and generates a fault output when overcurrent conditions are detected, providing comprehensive IGBT protection.

Working Principle: HCPL-316J-500E Working Principle

The HCPL-316J-500E operates by converting an LED input signal to an isolated gate drive output through optical coupling. When the input LED is driven (IF > threshold), the photodetector IC activates the output driver, which sources or sinks up to 2.5A peak current to charge/discharge the IGBT gate capacitance. The UVLO circuit monitors VCC2 and disables the output when the supply drops below 10V, ensuring the IGBT is never driven with insufficient gate voltage. The desaturation detection circuit monitors the IGBT VCE through the DESAT pin; when VCE exceeds the threshold during on-state, a fault is detected and the output is slowly shut down to avoid voltage spikes. The Miller clamp activates when the output goes low, providing a low-impedance path from gate to emitter to prevent parasitic turn-on caused by Miller capacitance current during high dv/dt collector voltage transitions.

Pin Description: HCPL-316J-500E Pin Definition and Functions
Pin Name Type Function
1 LED+ Input LED anode (input signal)
2 LED- Input LED cathode (input signal)
3 LED- Input LED cathode (common)
4 VIN- Input Inverting input (optional)
5 VIN+ Input Non-inverting input
6 VCC1 Power Input side supply
7 GND1 Power Input side ground
8 FAULT Output Fault status feedback (active low)
9 DESAT Input Desaturation detection input
10 VCC2 Power Output side supply (15-30V)
11 VOUT Output Gate drive output
12 VEE Power Output side ground (emitter)
13 VE Input Emitter reference input
14 CLAMP Output Active Miller clamp output
15 GND2 Power Output side ground
16 RESET Input Fault reset input (active low)
Application Scenarios: In which products and applications is HCPL-316J-500E used
  • AC induction motor inverter IGBT gate drive
  • Brushless DC motor servo drive power stage
  • Industrial UPS and SMPS IGBT gate drive
  • Solar string inverter IGBT/MOSFET gate drive
  • Welding inverter power stage IGBT control
Alternative Models: What chips are recommended as replacements for HCPL-316J-500E
Manufacturer Part Number Package Notes
Broadcom HCPL-316J-000E 16-SMD DIP Tube packaging variant
Broadcom HCPL-315J-500E 16-SMD DIP 0.5A lower current variant
TI ISO5452 SOIC-16 Isolated IGBT gate driver, capacitive
Silicon Labs Si826x NB SOIC-16 Isolated gate driver, capacitive coupling
Infineon 1ED3321 DSO-16 Isolated IGBT gate driver IC

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1