Opens in a new tab

HCPL-0630-500E

Dual 15MBd high-speed optocoupler, 3750Vrms, 45ns, open-collector, 16-SOIC, T&R

11300

Effective Inventory

Image for reference only

Manufacturer Part:

HCPL-0630-500E

Package:

SOIC-16 (10.3 x 7.5 x 2.65 mm, 300mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HCPL-0630-500E is a dual-channel high-speed optocoupler from Broadcom (formerly Avago Technologies), providing 3750Vrms isolation per IEC 60747-5-2. Each channel contains a GaAsP LED optically coupled to an integrated photodetector with open-collector output, achieving 15MBd data rate with 45ns propagation delay. The 500E suffix denotes tape and reel packaging in a 16-lead SOIC package rated for -40°C to +100°C.

Key Specifications

Channels 2 (Dual)
Data Rate 15 MBd
Propagation Delay 45 ns (Max)
Isolation Voltage 3750 Vrms
CTR (Current Transfer Ratio) Min 19%
LED Forward Current (IF) 10 mA (Recommended)
Output Configuration Open Collector
CMRR 15 kV/μs (Min)
Supply Voltage 4.5V to 5.5V
Package 16-Lead SOIC (300mil)
Operating Temperature -40°C to +100°C
Packing Tape & Reel (500E)

Features

  • Dual-channel isolation in a single 16-SOIC package for space savings
  • 15MBd data rate for high-speed digital signal isolation
  • 45ns maximum propagation delay for minimal latency
  • 3750Vrms isolation voltage per IEC 60747-5-2
  • Open-collector output for flexible interface logic levels
  • 15kV/μs common mode rejection for noisy environments
  • Stable CTR over temperature and time

Applications

  • Digital isolation for SPI, I2C, and UART interfaces
  • Motor drive logic signal isolation
  • Inverter and power supply feedback isolation
  • Industrial network isolation (RS-485, CAN)
  • Medical equipment patient isolation
Product Introduction: HCPL-0630-500E Product Introduction

The Broadcom HCPL-0630-500E is a dual-channel high-speed digital optocoupler that provides electrical isolation of 3750Vrms while transmitting digital signals at data rates up to 15MBd. Each channel consists of a GaAsP LED optically coupled to a PIN photodiode and high-gain amplifier driving an open-collector output transistor. The 45ns maximum propagation delay makes it suitable for high-speed bus and interface isolation applications. The dual-channel configuration in a 16-lead SOIC package provides two isolated channels in the board space of a single wide-body SOIC, reducing cost and board area compared to two single-channel devices. The 500E suffix specifies tape and reel packaging for automated SMT assembly.

Working Principle: HCPL-0630-500E Working Principle

The HCPL-0630-500E uses optical coupling to transmit digital signals across an isolation barrier. When the input LED is forward biased (IF ≈ 10mA), it emits infrared light at approximately 660nm wavelength. This light passes through the transparent isolation dielectric and illuminates the PIN photodiode on the output side. The photodiode converts the optical signal back to a photocurrent, which is amplified by the high-gain transimpedance amplifier and drives the open-collector output transistor. When the LED is off, no light reaches the photodiode and the output transistor is off, allowing the output to be pulled high by an external pull-up resistor. The internal shield between input and output provides 15kV/μs common mode rejection, ensuring reliable operation in high-noise environments such as motor drive circuits.

Pin Description: HCPL-0630-500E Pin Definition and Functions
Pin Name Type Function
1 ANODE1 Input Channel 1 LED anode
2 CATHODE1 Input Channel 1 LED cathode
3 ANODE2 Input Channel 2 LED anode
4 CATHODE2 Input Channel 2 LED cathode
5 GND2 Power Output side ground
6 VO2 Output Channel 2 open-collector output
7 VE2 Input Channel 2 output enable (active high)
8 VCC2 Power Output side supply (4.5-5.5V)
9 VE1 Input Channel 1 output enable (active high)
10 VO1 Output Channel 1 open-collector output
11 GND2 Power Output side ground
12-16 NC – No connect
Application Scenarios: In which products and applications is HCPL-0630-500E used
  • SPI, I2C, and UART digital interface isolation
  • Motor drive signal isolation and level shifting
  • Inverter feedback loop isolation (voltage/current sensing)
  • Industrial fieldbus isolation (RS-485, CAN bus)
  • Medical device patient-side signal isolation
Alternative Models: What chips are recommended as replacements for HCPL-0630-500E
Manufacturer Part Number Package Notes
Broadcom HCPL-063N-500E SOIC-16 25MBd higher speed variant
Toshiba TLP2745 SOIC-16 Dual 15MBd optocoupler
Silicon Labs Si862x SOIC-16 Dual digital isolator, capacitive
TI ISO7721 SOIC-16 Dual digital isolator, capacitive
Broadcom ACPL-064L-500E SOIC-16 Dual 25MBd, lower power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1