Opens in a new tab

STF701-LF-T7

EMI T-filter + TVS diode array, ±15kV ESD, 10pF, SOT-23-6, lead-free, Protek Devices

15800

Effective Inventory

Image for reference only

Manufacturer Part:

STF701-LF-T7

Package:

SOT-23-6 (2.9 x 1.6 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STF701-LF-T7 is an EMI filter with integrated TVS diode array from Protek Devices, designed for EMI filtering and ESD protection of high-speed signal lines. This T-filter configuration provides both common-mode and differential-mode noise filtering along with IEC 61000-4-2 compliant ESD protection (15kV air discharge, 8kV contact discharge). The LF-T7 suffix denotes lead-free construction in a SOT-23-6 package, suitable for protecting USB, HDMI, and other high-speed interface lines.

Key Specifications

Filter Configuration T-Filter (series inductor + shunt TVS)
ESD Protection (Air) ±15 kV (IEC 61000-4-2)
ESD Protection (Contact) ±8 kV (IEC 61000-4-2)
Clamping Voltage 12 V (Typ) @ Ipp=1A
Capacitance 10 pF (Typ) per line
Channel Count 1
Package SOT-23-6
Operating Temperature -55°C to +150°C
Lead-Free Yes (LF suffix)

Features

  • Integrated T-filter with TVS diode for combined EMI/ESD protection
  • IEC 61000-4-2 Level 4 ESD protection (15kV air, 8kV contact)
  • Low capacitance of 10pF per line for high-speed signal compatibility
  • Compact SOT-23-6 package for space-constrained designs
  • Lead-free construction meeting RoHS requirements
  • Bidirectional TVS protection for AC signal compatibility

Applications

  • USB 2.0/3.0 port ESD protection and EMI filtering
  • HDMI and DisplayPort interface protection
  • Mobile phone connector ESD/EMI protection
  • LAN and Ethernet port surge protection
  • Consumer electronics external interface protection
Product Introduction: STF701-LF-T7 Product Introduction

The Protek Devices STF701-LF-T7 is an integrated EMI filter and TVS (Transient Voltage Suppressor) diode array designed to protect high-speed signal lines from both electromagnetic interference and electrostatic discharge events. The T-filter topology combines series impedance elements (inductors/resistors) with shunt TVS diodes to attenuate high-frequency noise while simultaneously clamping transient voltage spikes. The device provides IEC 61000-4-2 Level 4 ESD protection capable of withstanding ±15kV air discharge and ±8kV contact discharge. With a low 10pF typical capacitance per line, the STF701 maintains signal integrity on high-speed interfaces up to several hundred MHz. The LF suffix confirms lead-free RoHS-compliant construction, and the T7 suffix specifies the SOT-23-6 package configuration.

Working Principle: STF701-LF-T7 Working Principle

The STF701-LF-T7 combines two protective functions in a single device. The T-filter section uses series impedance elements (thin-film resistors or integrated inductors) to create a low-pass filter that attenuates high-frequency EMI noise above the signal bandwidth. The shunt TVS diodes provide transient voltage suppression by clamping voltage spikes from ESD events to safe levels. When an ESD strike occurs, the TVS diode rapidly avalanches, creating a low-impedance path that diverts the transient current away from the protected IC. The T-filter’s series elements limit the current through the TVS diode while also filtering the residual high-frequency energy. The bidirectional TVS configuration protects against both positive and negative polarity transients without distorting AC-coupled signals.

Pin Description: STF701-LF-T7 Pin Definition and Functions
Pin Name Type Function
1 I/O 1 I/O Protected signal line (line side)
2 GND Power Ground connection
3 I/O 2 I/O Protected signal line (IC side)
4 I/O 3 I/O Protected signal line (IC side)
5 GND Power Ground connection
6 I/O 4 I/O Protected signal line (line side)
Application Scenarios: In which products and applications is STF701-LF-T7 used
  • USB 2.0/3.0 data line ESD protection and EMI filtering
  • HDMI and DisplayPort interface transient protection
  • Mobile device connector ESD/EMI suppression
  • Ethernet PHY MDI interface protection
  • Consumer electronics external port protection
Alternative Models: What chips are recommended as replacements for STF701-LF-T7
Manufacturer Part Number Package Notes
Semtech STF701TG SC-88-6 Original T-filter + TVS, same function
ON Semiconductor NUP4202MR6 SOT-23-6 Quad TVS array, similar ESD protection
TI TPD4E05U06 USON-10 Quad-channel ESD protection
Nexperia PRTR5V0U2X SOT-143 Dual TVS + Zener for USB
STMicroelectronics USB6B1 SO-8 Quad TVS for USB protection

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1