Opens in a new tab

Home » Integrated Circuits ICs, Sensors » LEA-6S-0-001

LEA-6S-0-001

50-ch GPS module, u-blox 6, -162dBm sensitivity, 1s hot TTFF, 17×22.4mm, UART/USB/DDC

13503

Effective Inventory

Image for reference only

Manufacturer Part:

LEA-6S-0-001

Package:

LEA LCC (17.0 x 22.4 x 2.4 mm), 28-pin

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LEA-6S-0-001 is a GPS receiver module from u-blox based on the high-performance u-blox 6 positioning engine. It features 50-channel acquisition with over 2 million correlators, delivering sub-1-second Time-To-First-Fix (TTFF) in hot start. The module supports GPS L1 C/A code with SBAS (WAAS/EGNOS/MSAS) and is Galileo-ready. Its industry-standard 17.0 x 22.4 x 2.4mm LEA form factor enables simple migration from LEA-5 designs.

Key Specifications

Receiver Type 50-channel GPS L1, C/A code
Max Navigation Update Rate 5 Hz
TTFF Cold Start 26 s
TTFF Hot Start 1 s
Sensitivity (Tracking) -162 dBm
Sensitivity (Cold Start) -148 dBm
Position Accuracy 2.5 m CEP (autonomous)
Interfaces 1x UART, 1x USB, 1x DDC (I2C)
Supply Voltage 2.7V ~ 3.6V
Tracking Current 50 mA (typ)
Backup Current 22 uA (typ)
Module Size 17.0 x 22.4 x 2.4 mm
Operating Temperature -40C to +85C

Features

  • 50-channel u-blox 6 positioning engine with over 2M correlators
  • Sub-1-second hot start TTFF with AssistNow A-GPS support
  • Galileo open service capable and GLONASS FDMA ready
  • Multiple interfaces: UART, USB 2.0 full-speed, DDC (I2C)
  • Power Save Mode and Eco Mode for battery-powered applications
  • SBAS support (WAAS, EGNOS, MSAS, GAGAN)
  • AEC-Q100 GPS chip qualified for automotive environments
  • ROM firmware variant for stable, non-upgradable operation

Applications

  • Fleet management and vehicle tracking systems
  • Asset tracking and logistics monitoring
  • Marine navigation and chart plotters
  • Automotive navigation head units
  • Timing and synchronization applications
Product Introduction: LEA-6S-0-001 Product Introduction

The u-blox LEA-6S-0-001 is a cost-effective, high-performance GPS receiver module based on the u-blox 6 positioning engine. It brings 50-channel GPS L1 reception with SBAS augmentation to the industry-standard LEA form factor (17.0 x 22.4 x 2.4mm), enabling easy migration from earlier LEA-5 designs. The module features over 2 million hardware correlators that enable massive parallel time/frequency space searches, achieving sub-1-second hot start TTFF and reliable acquisition even in challenging signal environments. The LEA-6S variant provides essential GPS functionality without dead reckoning or precision timing features, targeting cost-sensitive applications. The -0-001 packaging code indicates ROM-based firmware supplied on tape-and-reel, suitable for automated surface-mount assembly. Multiple serial interfaces (UART, USB, DDC/I2C) provide flexible connectivity to host processors, while the low 50mA tracking current and configurable Power Save Mode support battery-operated designs.

Working Principle: LEA-6S-0-001 Working Principle

The LEA-6S module integrates a complete GPS receiver chain from RF front-end through baseband processing to position calculation. The internal LNA amplifies the 1575.42MHz GPS L1 signal from the active or passive antenna, followed by downconversion and digitization in the RF section. The baseband correlator array, with over 2 million parallel correlators, simultaneously searches across multiple Doppler shifts and code phases to rapidly acquire satellite signals. Once acquired, the delay-locked loops (DLL) track each satellite C/A code while carrier-tracking loops maintain phase lock. The navigation processor computes pseudoranges from tracked satellites and solves the position using a Kalman filter-based algorithm. Position, velocity, and time (PVT) solutions are output via NMEA or u-blox proprietary UBX protocol through the UART, USB, or DDC interfaces. The on-chip TCXO provides the frequency reference, and the real-time clock maintains timing during backup mode with only 22uA current consumption.

Pin Description: LEA-6S-0-001 Pin Definition and Functions
Pin Name Type Function
1 VCC Power Supply voltage (2.7V-3.6V)
2 VCC Power Supply voltage
3 V_BCKP Power Backup supply for RTC and SRAM
4 EXTINT0 Input External interrupt input 0
5 USB_DM I/O USB data minus
6 USB_DP I/O USB data plus
7 TXD1 Output UART 1 transmit data
8 RXD1 Input UART 1 receive data
9 TIMEPULSE Output Time pulse output (1PPS)
10 DDC_SDA I/O DDC (I2C) data
11 DDC_SCL Output DDC (I2C) clock
12 RF_IN Input GPS antenna RF input (50 ohm)
Application Scenarios: In which products and applications is LEA-6S-0-001 used
  • Fleet management and vehicle tracking with 5Hz update rate
  • Marine navigation systems requiring reliable GPS under multipath
  • Asset tracking and logistics monitoring with low power consumption
  • Automotive navigation head units with USB and UART connectivity
  • Timing and synchronization for cellular base stations and NTP servers
Alternative Models: What chips are recommended as replacements for LEA-6S-0-001
Manufacturer Part Number Package Notes
u-blox NEO-6M-0-001 16×12.2mm Smaller NEO form factor, same u-blox 6 engine
u-blox NEO-7N-0-001 16×12.2mm u-blox 7, GLONASS+GPS
u-blox MAX-M8C-0-1 9.7×10.1mm u-blox M8, multi-GNSS
Quectel L76-L 16×12.2mm GPS+GLONASS, compatible footprint
SimCom SIM68R 16×12.2mm GPS+GLONASS receiver module

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1