Opens in a new tab

RTQ2943GSP-QA

42V 3.5A buck converter, 0.8-42V out, 100kHz-2.5MHz, AEC-Q100, 8-SOP-EP

4589

Effective Inventory

Image for reference only

Manufacturer Part:

RTQ2943GSP-QA

Package:

8-SOP-EP (3.90 x 4.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The RTQ2943GSP-QA from Richtek Technology is a 42V, 3.5A step-down DC-DC buck converter with AEC-Q100 automotive qualification. It operates from a 4V to 42V input range and provides an adjustable output voltage from 0.8V to 42V at up to 3.5A continuous output current. The switching frequency is programmable from 100kHz to 2.5MHz via an external resistor, allowing optimization of efficiency versus component size.

Key Specifications

Topology Step-Down (Buck)
Input Voltage 4V ~ 42V
Output Voltage 0.8V ~ 42V (adjustable)
Output Current 3.5 A
Reference Voltage 0.8 V (typ)
Switching Frequency 100kHz ~ 2.5MHz (programmable)
Min On-Time 100 ns (typ)
HS Switch RDS(on) 150 mOhm (typ)
Spread Spectrum +6% (EMI reduction)
Package 8-SOP-EP (3.90 x 4.90 mm)
Operating Temperature -40C to +150C (TJ)
Qualification AEC-Q100 (-QA suffix)

Features

  • Wide 4V to 42V input range for automotive 12V/24V bus systems
  • AEC-Q100 qualified for automotive applications
  • Programmable switching frequency up to 2.5MHz for compact designs
  • Spread-spectrum modulation reduces peak EMI emissions
  • Power Good output with programmable threshold
  • Internal soft-start with adjustable timing
  • Cycle-by-cycle current limit and thermal shutdown protection
  • 100ns minimum on-time supports high-frequency operation

Applications

  • Automotive infotainment and ADAS power supply
  • Industrial distributed power bus conversion
  • Battery-powered equipment power management
  • Telecom 48V to logic rail conversion
Product Introduction: RTQ2943GSP-QA Product Introduction

The Richtek RTQ2943GSP-QA is a 42V, 3.5A step-down DC-DC buck converter with AEC-Q100 automotive qualification. It operates from a wide 4V to 42V input range, making it suitable for automotive 12V and 24V bus systems, as well as industrial distributed power architectures. The adjustable output voltage from 0.8V to 42V with 3.5A output current provides flexibility for powering various loads from logic rails to sensor supplies. The programmable switching frequency from 100kHz to 2.5MHz via a single external resistor on the RT/SYNC pin allows designers to optimize efficiency at lower frequencies or minimize inductor size at higher frequencies. Spread-spectrum modulation adds 6% dithering above the switching frequency to reduce peak EMI emissions, simplifying automotive EMC compliance. The -QA suffix confirms AEC-Q100 Grade 1 qualification for under-hood automotive applications.

Working Principle: RTQ2943GSP-QA Working Principle

The RTQ2943 uses a current-mode control architecture with an internal high-side N-Channel MOSFET. During the on-time, the HS switch connects the input voltage to the output inductor, causing inductor current to ramp up linearly. When the peak current reaches the error amplifier-controlled threshold, the HS switch turns off and the freewheeling (low-side) switch turns on, allowing inductor current to ramp down. The current-mode loop provides inherent cycle-by-cycle current limiting and fast transient response. The RT/SYNC pin programs the switching frequency through an external resistor to ground; alternatively, an external clock signal can synchronize the switching frequency. The FB pin receives the feedback voltage (0.8V reference) from the output voltage divider, and the error amplifier adjusts the peak current setpoint to regulate the output. Spread-spectrum modulation varies the switching frequency by +-6% to spread EMI energy across a wider bandwidth.

Pin Description: RTQ2943GSP-QA Pin Definition and Functions
Pin Name Type Function
1 RT/SYNC Input Frequency setting resistor / external clock sync
2 EN Input Enable (active high)
3 PGOOD Output Power good open-drain output
4 FB Input Feedback voltage input (0.8V reference)
5 SS/TR Input Soft-start / tracking capacitor
6 COMP I/O Error amplifier output (compensation)
7 GND Power Ground and thermal pad
8 VIN Power Input supply (4-42V)
Application Scenarios: In which products and applications is RTQ2943GSP-QA used
  • Automotive infotainment and ADAS 12V/24V to 5V/3.3V power supply
  • Industrial distributed power bus 24V/48V step-down conversion
  • Battery-powered equipment power management from multi-cell packs
  • Telecom 48V system intermediate bus to logic rail conversion
Alternative Models: What chips are recommended as replacements for RTQ2943GSP-QA
Manufacturer Part Number Package Notes
Diodes Inc AP64350QSP-13 SOP-8-EP 42V 3.5A automotive buck, similar
TI LM5164DDAR SOP-8-EP 65V 500mA buck, higher voltage
MPS MP8759GD-Z QFN-12 22V 2A sync buck, lower voltage
Richtek RTQ2942GSP-QA 8-SOP-EP Same family, 4.5A variant

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1