Opens in a new tab

BD6231F-E2

H-bridge DC motor driver, 1A, 6-15V, thermal/OCP, SSOP-16, ROHM

2040

Effective Inventory

Image for reference only

Manufacturer Part:

BD6231F-E2

Package:

SSOP-16

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BD6231F-E2 from ROHM Semiconductor is an H-bridge motor driver IC designed for bidirectional DC motor control. It integrates NPN Darlington output transistors in an H-bridge configuration supporting up to 1A output current with built-in thermal shutdown and over-current protection.

Key Specifications

  • Type: H-Bridge DC Motor Driver
  • Output Configuration: Full H-bridge (bipolar)
  • Supply Voltage: 6-15V
  • Output Current: 1A continuous (per channel)
  • Peak Current: 1.5A
  • V_CE(sat): 1.5V max (upper+lower total)
  • Control: Forward/Reverse/Brake/Stop via logic inputs
  • Protection: Thermal shutdown (150C typical), over-current
  • Package: SSOP-16
  • Operating Temp: -20C to +75C typical

Features

  • Integrated H-bridge for bidirectional motor drive
  • Forward/reverse/brake/stop modes via logic control
  • Built-in thermal shutdown and over-current protection
  • 1A continuous output current
  • Compact SSOP-16 package

Applications

  • DC motor drive in consumer electronics
  • Vending machine dispensing mechanisms
  • Valve and actuator control
  • Printer and scanner motor control
  • Automotive mirror and seat motors
Product Introduction: BD6231F-E2 Product Introduction

The BD6231F-E2 from ROHM is an H-bridge DC motor driver with 1A output, 6-15V supply, and built-in thermal/over-current protection in an SSOP-16 package.

Working Principle: BD6231F-E2 Working Principle

The BD6231F integrates four NPN Darlington transistors in an H-bridge configuration. Logic inputs (FIN, RIN) control the bridge state: FIN high drives forward, RIN high drives reverse, both high activates brake, both low enters standby. Internal clamp diodes protect against inductive kickback.

Pin Description: BD6231F-E2 Pin Definition and Functions
Pin Name Function
1 OUT1 Motor output A
2 VREF Output current reference voltage
3 VCC Motor supply (6-15V)
4 FIN Forward input
5 RIN Reverse input
6 VCC2 Logic supply
7-8 GND Ground
9-10 OUT2 Motor output B
Application Scenarios: In which products and applications is BD6231F-E2 used
  • DC motor drive in consumer electronics
  • Printer and scanner motor control
  • Valve and actuator drive
  • Automotive mirror/seat motor
Alternative Models: What chips are recommended as replacements for BD6231F-E2
Model Manufacturer Spec1 Spec2
BD6232F-E2 ROHM 2A H-bridge SSOP-16
DRV8833PWP TI 2A dual H-bridge HTSSOP-16
TB6612FNG Toshiba 1.2A dual SSOP-24

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1