Opens in a new tab

SMF05CT1G-MS

5-ch unidirectional TVS ESD array, 5V, +/-15kV, SC-88-6, onsemi

7360

Effective Inventory

Image for reference only

Manufacturer Part:

SMF05CT1G-MS

Package:

SC-88-6 / SOT-363 (2.0 x 1.25 x 0.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SMF05CT1G-MS from onsemi is a 5-channel unidirectional TVS diode array designed for ESD protection of high-speed data lines. It provides IEC 61000-4-2 Level 4 ESD protection up to +/-15kV contact discharge and +/-15kV air discharge with 5V working voltage in a compact SC-88/SOT-363 package.

Key Specifications

  • Type: 5-Channel Unidirectional TVS Diode Array
  • Manufacturer: onsemi
  • Working Voltage (VRWM): 5V
  • Breakdown Voltage (VBR): 6.2V min
  • Clamping Voltage (VC): 9.8V @ 5A / 12.5V @ 8A
  • Peak Pulse Power (PPP): 100W @ 8/20us
  • Peak Pulse Current (IPP): 8A
  • Junction Capacitance (CJ): 80pF typical
  • Leakage Current (IR): 1.0uA max @ VRWM=5V
  • ESD Protection: +/-15kV contact, +/-15kV air (IEC 61000-4-2)
  • EFT Protection: 40A (IEC 61000-4-4)
  • Package: SC-88-6 / SOT-363 (2.0 x 1.25 x 0.9mm)
  • Operating Temp: -55C to +150C
  • RoHS: Compliant

Features

  • 5-channel ESD protection in ultra-small SC-88 package
  • +/-15kV IEC 61000-4-2 contact and air discharge protection
  • Low clamping voltage (9.8V @ 5A) for sensitive IC protection
  • 100W peak pulse power dissipation
  • Low leakage current <1uA

Applications

  • USB 2.0/3.0 port protection
  • HDMI interface ESD protection
  • Cellular phone data line protection
  • Portable electronics I/O protection
  • LAN/network equipment ESD protection
Product Introduction: SMF05CT1G-MS Product Introduction

The SMF05CT1G-MS from onsemi is a 5-channel unidirectional TVS diode array providing +/-15kV ESD protection with 5V working voltage, 100W peak pulse power, and low 9.8V clamping voltage in a compact SC-88-6 package.

Working Principle: SMF05CT1G-MS Working Principle

The SMF05CT1G uses a rail-clamp architecture where each I/O channel has steering diodes connected to VCC and GND rails. A zener diode between the rails clamps the voltage. During a positive ESD event, current flows through the upper steering diode and zener to ground. During a negative ESD event, current flows through the lower steering diode directly to ground. The zener diode clamps the positive rail voltage to approximately 9.8V, protecting downstream circuitry.

Pin Description: SMF05CT1G-MS Pin Definition and Functions
Pin Name Function
1 I/O 1 ESD protected channel 1
2 GND Ground (negative rail)
3 I/O 2 ESD protected channel 2
4 I/O 3 ESD protected channel 3
5 VCC Positive supply rail
6 I/O 4/5 ESD protected channels 4 and 5
Application Scenarios: In which products and applications is SMF05CT1G-MS used
  • USB 2.0/3.0 port protection
  • HDMI interface ESD protection
  • Cellular phone data line protection
  • Portable electronics I/O protection
Alternative Models: What chips are recommended as replacements for SMF05CT1G-MS
Model Manufacturer Key Spec Package
PRTR5V0U2X NXP 2-ch ESD 5V SOT-143
TPD4E05U06 TI 4-ch ESD 5V USON-10
ESD5V4U5C Toshiba 4-ch ESD 5V UDFN-6

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1