Opens in a new tab

900000011829

RF inductor, 10nH, 0402, 6GHz SRF, Wurth Elektronik 900000011829

5000

Effective Inventory

Image for reference only

Manufacturer Part:

900000011829

Package:

0402 (1.0 x 0.5 x 0.35mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 900000011829 from Wurth Elektronik is a WE-RF RF inductor in an 0402 package with 10nH inductance, +/-5% tolerance, Q factor of 30 at 250MHz, and 6GHz minimum self-resonant frequency for RF matching and filter applications.

Key Specifications

  • Type: RF Inductor (WE-RF)
  • Manufacturer: Wurth Elektronik
  • Inductance: 10nH
  • Tolerance: +/-5%
  • Q Factor: 30 @ 250MHz
  • SRF: 6GHz min
  • DCR: 0.15 Ohm max
  • Rated Current: 500mA
  • Package: 0402 (1005 metric)
  • Operating Temp: -40C to +125C
  • RoHS: Compliant

Features

  • 10nH low inductance for RF matching
  • 6GHz high self-resonant frequency
  • Ultra-small 0402 package
  • Q factor 30 at 250MHz

Applications

  • RF impedance matching networks
  • RF filter circuits
  • Antenna tuning circuits
  • Wireless module RF front-end
Product Introduction: 900000011829 Product Introduction

The 900000011829 from Wurth Elektronik is a WE-RF RF inductor with 10nH inductance, +/-5% tolerance, Q factor 30 at 250MHz, 6GHz SRF, and 500mA rated current in an ultra-small 0402 package for RF matching and filter applications.

Working Principle: 900000011829 Working Principle

The RF inductor uses a thin-film or wire-wound construction in a ceramic substrate. At RF frequencies, the inductor provides a frequency-dependent impedance (Z = j*2*pi*f*L). At 250MHz, 10nH provides approximately 15.7 Ohm of reactance with Q factor 30. The self-resonant frequency (6GHz) is the point where parasitic capacitance resonates with the inductance, above which the component behaves capacitively.

Pin Description: 900000011829 Pin Definition and Functions
Pin Name Function
1 Terminal 1 RF signal connection
2 Terminal 2 RF signal connection
Application Scenarios: In which products and applications is 900000011829 used
  • RF impedance matching networks
  • RF filter circuits
  • Antenna tuning circuits
  • Wireless module RF front-end
Alternative Models: What chips are recommended as replacements for 900000011829
Model Manufacturer Key Spec Package
LQG15HS10NJ02D Murata 10nH 0402 RF inductor 0402
0402CS-10NXJLU Coilcraft 10nH 0402 RF inductor 0402
L-07C10N0SV6T TDK 10nH 0402 RF inductor 0402

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1