Opens in a new tab

NCP1117DT33RKG

1A LDO, 3.3V fixed, 1.2V dropout, 20V max input, DPAK, onsemi NCP1117 series

7393

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1117DT33RKG

Package:

DPAK (DT, 6.5 x 5.5 x 2.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi NCP1117DT33RKG is a 1A low-dropout (LDO) linear voltage regulator providing a fixed 3.3V output. With a maximum dropout voltage of 1.2V at 800mA, it can operate from input voltages up to 20V. The DPAK package provides excellent thermal performance for applications requiring moderate output current.

Key Specifications

Output Voltage 3.3V (fixed)
Maximum Output Current 1A
Dropout Voltage 1.2V max at 800mA
Input Voltage Range 4.5V to 20V
Output Accuracy ±1.0%
Quiescent Current 5mA (typical)
Current Limiting Yes
Thermal Shutdown Yes (150°C)
Package DPAK (DT)
Operating Temperature -40°C to +125°C

Features

  • 1A output current
  • 3.3V fixed output with ±1% accuracy
  • Low dropout: 1.2V at 800mA
  • No minimum load requirement
  • Internal current limiting and thermal shutdown
  • Direct replacement for LM1117
  • DPAK package for good thermal dissipation

Applications

  • 3.3V logic power supply from 5V
  • Post-regulation for switch-mode supplies
  • Battery-powered devices
  • Consumer electronics
  • Industrial control systems
Product Introduction: NCP1117DT33RKG Product Introduction

The onsemi NCP1117DT33RKG is a 1A LDO linear regulator providing a fixed 3.3V output with ±1% accuracy. As a direct replacement for the industry-standard LM1117, it features low dropout voltage (1.2V max at 800mA), internal current limiting, and thermal shutdown protection. The DPAK package provides good thermal dissipation for the 1A output current capability.

Working Principle: NCP1117DT33RKG Working Principle

The NCP1117DT33RKG uses a PNP pass transistor in a low-dropout configuration, allowing the output voltage to be maintained with only 1.2V of headroom at 800mA load. The internal bandgap reference provides the ±1% output voltage accuracy. On-chip trimming during manufacturing ensures the output voltage is within specification. The current limiting circuit protects against output short circuits, while the thermal shutdown activates at approximately 150°C junction temperature to prevent damage.

Pin Description: NCP1117DT33RKG Pin Definition and Functions
Pin Name Type Function
1 GND Ground Ground and thermal pad
2 VOUT Output 3.3V regulated output
3 VIN Input Input supply (4.5-20V)
Application Scenarios: In which products and applications is NCP1117DT33RKG used
  • 3.3V logic supply from 5V USB power
  • Switch-mode supply post-regulation
  • Battery-powered device 3.3V rail
  • Consumer electronics power management
  • Industrial controller 3.3V supply
Alternative Models: What chips are recommended as replacements for NCP1117DT33RKG
Manufacturer Part Number Package Notes
TI LM1117MP-3.3/NOPB SOT-223 Industry standard equivalent
onsemi NCP1117ST33T3G SOT-223 Same function, SOT-223 pkg
Microchip MCP1827-3302E/DB SOT-223 Low Iq alternative
Diodes Inc AZ1117EH-3.3TRG1 SOT-223 Cost-effective alternative
onsemi NCP1117DT50RKG DPAK 5.0V version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1