Opens in a new tab

Home » Integrated Circuits ICs, Sensors » ACS712ELCTR-05B

ACS712ELCTR-05B

Hall-effect current sensor, +/-5A, 185mV/A, 2.1kV isolation, SOIC-8

4827

Effective Inventory

Image for reference only

Manufacturer Part:

ACS712ELCTR-05B

Package:

SOIC-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ACS712ELCTR-05B from Allegro MicroSystems (distributed by ADI) is a fully integrated Hall-effect current sensor rated at +/-5A. It provides galvanic isolation of 2.1kV and an analog output proportional to the AC or DC current through the primary conductor. Packaged in SOIC-8.

Key Specifications

Current Range +/-5A
Sensitivity 185mV/A
Isolation Voltage 2100V RMS
Supply Voltage 5V
Output at Zero Current 2.5V (VCC/2)
Bandwidth 80kHz
Output Noise 11mV (typ)
Package SOIC-8
Operating Temperature -40 to +85 C

Features

  • Fully integrated Hall-effect current sensing
  • 2.1kV galvanic isolation
  • 185mV/A sensitivity for +/-5A range
  • Ratiometric output from 5V supply
  • 80kHz bandwidth for AC current
  • Low-resistance primary conductor (1.2mOhm)

Applications

  • Motor current monitoring
  • Battery charge/discharge measurement
  • Power supply current protection
  • Solar panel current sensing
Product Introduction: ACS712ELCTR-05B Product Introduction

The ACS712ELCTR-05B from Allegro MicroSystems is a fully integrated Hall-effect current sensor that measures AC or DC current through a low-resistance copper conductor integrated into the package. The primary current path has only 1.2mOhm resistance, adding negligible voltage drop to the measured circuit. A Hall-effect sensor detects the magnetic field generated by the current and produces an analog output voltage proportional to the current: at zero current the output is VCC/2 (2.5V), and it increases 185mV per ampere of positive current (or decreases for negative current). The 2.1kV RMS galvanic isolation between the primary conductor and the sensor electronics allows safe measurement of high-side currents. The 80kHz bandwidth supports AC current measurement including motor drives and inverters. Also available in +/-20A (100mV/A) and +/-30A (66mV/A) ranges.

Working Principle: ACS712ELCTR-05B Working Principle

The ACS712 uses a Hall-effect transducer positioned adjacent to the primary current conductor. When current flows through the copper conductor, it generates a magnetic field proportional to the current magnitude (Biot-Savart law). The Hall-effect sensor converts this magnetic field into a small voltage, which is amplified and offset to produce the ratiometric output. At zero current, the output sits at VCC/2 (2.5V with 5V supply). Positive current increases the output by 185mV/A, while negative current decreases it. The ratiometric output means the sensitivity scales with VCC, simplifying ADC interfacing. The 80kHz bandwidth is set by an internal filter; an external capacitor on the FILTER pin can reduce bandwidth for lower noise. The 1.2mOhm primary conductor resistance ensures minimal power dissipation even at full-scale current (5A2 x 0.0012 = 0.03W).

Pin Description: ACS712ELCTR-05B Pin Definition and Functions
Pin Name Function
1 IP+ Positive primary current terminal
2 IP+ Positive primary current terminal (internal connected to pin 1)
3 IP- Negative primary current terminal
4 IP- Negative primary current terminal (internal connected to pin 3)
5 GND Ground
6 FILTER External filter capacitor (bandwidth adjustment)
7 VIOUT Analog output (2.5V +/- 185mV/A)
8 VCC 5V supply
Application Scenarios: In which products and applications is ACS712ELCTR-05B used
  • Motor current monitoring with 185mV/A sensitivity and 80kHz bandwidth
  • Battery charge/discharge current measurement with 2.1kV isolation
  • Solar panel current sensing with 1.2mOhm insertion loss
  • Overcurrent protection with ADC reading of 2.5V +/- 925mV range
Alternative Models: What chips are recommended as replacements for ACS712ELCTR-05B
Model Manufacturer Key Difference
ACS712ELCTR-20A Allegro +/-20A range, 100mV/A sensitivity
ACS712ELCTR-30A Allegro +/-30A range, 66mV/A sensitivity
ACS723 Allegro Newer, lower noise, same function
INA219 TI Shunt-based, I2C output, no isolation

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1