Opens in a new tab

Home » Integrated Circuits ICs, Sensors » ACS770ECB-200B-PFF-T

ACS770ECB-200B-PFF-T

Hall-Effect Current Sensor, ±200A, 10mV/A, 120kHz, 4.8kVrms Isolation, PFF-5

6432

Effective Inventory

Image for reference only

Manufacturer Part:

ACS770ECB-200B-PFF-T

Package:

PFF-5 (Through-Hole, formed leads, 13.5 x 10.4 x 7.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ACS770ECB-200B-PFF-T from Allegro MicroSystems is a fully integrated Hall-effect-based high-precision linear current sensor IC with 100 µOhm conductor resistance. It provides galvanically isolated bidirectional ±200 A current sensing with 10 mV/A sensitivity and 120 kHz bandwidth in a 5-pin through-hole PFF package.

Key Specifications

Type Hall-Effect Linear Current Sensor IC
Current Range ±200 A (Bidirectional)
Sensitivity 10 mV/A (typical)
Internal Conductor Resistance 100 µOhm (typical)
Bandwidth 120 kHz (typical, -3 dB)
Output Rise Time 4.1 µs
Supply Voltage 4.5 V to 5.5 V
Isolation Voltage 4800 VRMS
Accuracy ±0.5% (typical)
Package 5-Pin PFF (Through-Hole, formed leads)
Operating Temperature -40°C to 85°C
Qualification AEC-Q100

Features

  • Industry-leading total output accuracy with digital temperature compensation
  • 100 µOhm ultra-low internal conductor resistance
  • 120 kHz bandwidth with 4.1 µs output response time
  • 4800 VRMS galvanic isolation
  • Integrated shield reduces capacitive coupling from high dv/dt signals
  • Factory-trimmed for accuracy
  • AEC-Q100 automotive qualified
  • UL certified (File No. US-29755-UL)

Applications

  • Automotive motor control and inverter systems
  • Industrial motor drives and UPS systems
  • Battery management and EV charging
  • DC-DC converter current monitoring
  • Overcurrent fault detection and load management
Product Introduction: ACS770ECB-200B-PFF-T Product Introduction

The ACS770ECB-200B-PFF-T from Allegro MicroSystems is a fully integrated Hall-effect-based linear current sensor IC providing galvanically isolated bidirectional ±200 A current measurement. The device features a 100 µOhm copper conduction path that generates a magnetic field sensed by a chopper-stabilized BiCMOS Hall IC. Proprietary digital temperature compensation greatly improves accuracy and stability over the operating temperature range without affecting the 120 kHz analog output bandwidth. The integrated shield reduces capacitive coupling from current conductor dv/dt signals, minimizing offset drift in high-voltage applications. With 4800 VRMS isolation and AEC-Q100 qualification, the device is ideal for automotive and industrial high-current sensing.

Working Principle: ACS770ECB-200B-PFF-T Working Principle

The ACS770ECB-200B-PFF-T measures current using the Hall effect. Current flowing through the internal copper conduction path (terminals 4 and 5) generates a magnetic field proportional to the current magnitude. This field is concentrated by a low-hysteresis magnetic core and detected by a Hall transducer located near the die. The Hall transducer converts the magnetic field into a voltage signal. A chopper-stabilized BiCMOS amplifier with digital temperature compensation processes this signal, providing a ratiometric analog output voltage proportional to the sensed current. For bidirectional sensing, the output sits at VCC/2 (nominally 2.5 V) at zero current and varies proportionally with current in either direction. The integrated shield between the conductor and Hall IC minimizes capacitive coupling from high dv/dt switching transients. Factory trimming ensures accuracy without external calibration.

Pin Description: ACS770ECB-200B-PFF-T Pin Definition and Functions
Pin Name Type Function
1 VCC Power 5V power supply
2 GND Ground Ground
3 VIOUT Output Analog output voltage (proportional to current)
4 IP+ Input Positive current terminal
5 IP- Input Negative current terminal
Application Scenarios: In which products and applications is ACS770ECB-200B-PFF-T used
  • Automotive EV/HEV inverter and motor drive current sensing
  • Industrial UPS and power supply output current monitoring
  • Battery management system charge/discharge current measurement
  • Solar inverter and energy storage system current sensing
  • Welding equipment and plating power supply monitoring
Alternative Models: What chips are recommended as replacements for ACS770ECB-200B-PFF-T
Manufacturer Part Number Package Notes
Allegro ACS770ECB-200U-PFF-T PFF-5 200A unidirectional version
Allegro ACS770KCB-150B-PFF-T PFF-5 ±150A, -40 to 125°C
Allegro ACS37800 SOIC-16 Power monitor with I2C
LEM HAS 200-S Module ±200A, voltage output
Texas Instruments INA260AIPWR TSSOP-16 Digital current sensor, 15A max

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1