Opens in a new tab

AD2428WCCSZ-RL

A2B transceiver, automotive audio bus, LFCSP, ADI

7410

Effective Inventory

Image for reference only

Manufacturer Part:

AD2428WCCSZ-RL

Package:

LFCSP (per specification)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD2428WCCSZ-RL from Analog Devices is an Automotive Audio Bus (A2B) transceiver IC that provides a low-latency, high-bandwidth digital audio network for automotive applications. As a main or subordinate node, it enables daisy-chain connectivity of multiple audio peripherals over a single unshielded twisted-pair cable.

Key Specifications

Type A2B (Automotive Audio Bus) Transceiver
Data Rate Up to 50 Mbps
Audio Channels Up to 32 channels per node
Latency < 50 us end-to-end
Cable Length Up to 15m between nodes, 40m total
Supply Voltage 1.8V / 3.3V
Interface I2S, TDM, I2C
Operating Temperature -40 to +105 deg C (W suffix)
Configuration Main or Subordinate node
Cable Unshielded twisted pair (UTP)

Features

  • A2B daisy-chain network eliminates dedicated audio wiring
  • Up to 32 audio channels per node with <50 us latency
  • Single unshielded twisted-pair cable for data and power
  • I2S/TDM audio interface for codec and DSP connection
  • I2C pass-through for remote peripheral control
  • Up to 10 nodes per bus, 40m total cable length
  • Phantom power delivery over the bus cable

Applications

  • Automotive distributed microphone arrays
  • Active noise cancellation in vehicles
  • In-car communication systems
  • Premium audio distribution networks
  • Emergency vehicle notification speaker systems
Product Introduction: AD2428WCCSZ-RL Product Introduction

The AD2428WCCSZ-RL from Analog Devices is an Automotive Audio Bus (A2B) transceiver that enables daisy-chain digital audio networking over a single unshielded twisted-pair cable. Supporting up to 32 audio channels per node with less than 50 us end-to-end latency, it dramatically simplifies automotive audio wiring harnesses. The A2B bus can deliver phantom power to remote nodes, eliminating separate power cables for distributed microphones and speakers. The W suffix indicates automotive temperature range (-40 to +105 deg C). The AD2428 can operate as either a main node (bus controller) or subordinate node in a daisy-chain topology of up to 10 nodes over 40 meters total cable length.

Working Principle: AD2428WCCSZ-RL Working Principle

The AD2428WCCSZ-RL implements the A2B protocol which uses a superframe structure transmitted over the twisted-pair bus at up to 50 Mbps. Each superframe contains downstream data (main to subordinates), upstream data (subordinates to main), and I2C control packets. The main node generates the bus clock and synchronizes all subordinate nodes. The physical layer uses a self-clocked encoding scheme that recovers clock and data from the received signal. Phantom power (up to 300 mA at 12V) is delivered over the bus cable using a DC bias on the differential pair, with DC blocking capacitors at each node. The I2C pass-through feature allows the main processor to configure remote I2C peripherals (codecs, amplifiers) through the A2B bus without additional wiring.

Pin Description: AD2428WCCSZ-RL Pin Definition and Functions
Pin Name Type Function
Application Scenarios: In which products and applications is AD2428WCCSZ-RL used
  • Automotive distributed microphone arrays
  • Active noise cancellation in vehicles
  • In-car communication systems
  • Premium audio distribution networks
  • Emergency vehicle notification speaker systems
Alternative Models: What chips are recommended as replacements for AD2428WCCSZ-RL
Manufacturer Part Number Package Notes
ADI AD2429W LFCSP A2B transceiver variant with different pinout
ADI AD2426W LFCSP Lower channel count A2B node
Microchip MIC28517 QFN Alternative audio bus approach

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1