Opens in a new tab

AD7367BRUZ-500RL7

Dual 14-bit 500kSPS simultaneous SAR ADC, +/-10V input, SPI daisy-chain

2373

Effective Inventory

Image for reference only

Manufacturer Part:

AD7367BRUZ-500RL7

Package:

28-lead TSSOP (4.4 x 9.7 x 1.0 mm, RU package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD7367BRUZ-500RL7 from Analog Devices is a dual-channel 14-bit 500kSPS SAR ADC with simultaneous sampling, 2.5V reference, and daisy-chain SPI in a 28-lead TSSOP package.

Key Specifications

Function Dual 14-bit Simultaneous Sampling SAR ADC
Resolution 14 bits
Sampling Rate 500 kSPS per channel (1 MSPS total)
Channels 2 (simultaneous sampling)
Analog Input Range +/-5V or +/-10V (pin selectable)
Reference Voltage 2.5V internal (or external)
Interface SPI (50MHz max SCLK), daisy-chain capable
Power Supply 5V (AVDD), 2.7-5.25V (DVDD/VIO)
Power Dissipation 95 mW (typical at 500kSPS)
SNR 82 dB (typ @ 10kHz, +/-10V range)
THD -88 dB (typ @ 10kHz)
Package 28-lead TSSOP
Operating Temperature -40 to +85 C

Features

  • True simultaneous 2-channel sampling
  • +/-5V or +/-10V bipolar input ranges
  • 14-bit resolution with 82dB SNR
  • Internal 2.5V reference with reference buffer
  • SPI daisy-chain for multi-device systems

Applications

  • Motor control current/voltage sensing
  • Power quality monitoring
  • Data acquisition systems
  • Protection relay measurement
Product Introduction: AD7367BRUZ-500RL7 Product Introduction

The AD7367BRUZ-500RL7 from Analog Devices is a dual-channel, 14-bit, 500kSPS simultaneous sampling successive approximation register (SAR) analog-to-digital converter. The key feature of this device is its ability to simultaneously sample two analog inputs, ensuring that both channels are captured at exactly the same instant, which is critical for applications requiring phase-accurate measurement of multi-channel signals such as motor phase currents, three-phase power, and differential voltage/current pairs. The dual sample-and-hold amplifiers capture both inputs simultaneously, and the ADC then sequentially converts each channel. The analog input range is pin-selectable between +/-5V and +/-10V (bipolar), eliminating the need for external level-shifting circuitry in many industrial applications that use +/-10V signal levels. The internal 2.5V reference with reference buffer simplifies design by eliminating the external reference and buffer amplifier, though an external reference can be used for higher accuracy. The SPI-compatible serial interface supports clock rates up to 50MHz and features a daisy-chain mode that allows multiple AD7367 devices to share a single CS line, enabling multi-channel data acquisition systems with minimal wiring. The conversion result for each channel is provided as a 14-bit two’s complement value, making it directly compatible with DSP and microcontroller arithmetic. The -500RL7 suffix indicates the 500kSPS speed grade and tape-and-reel packaging.

Working Principle: AD7367BRUZ-500RL7 Working Principle

The AD7367BRUZ-500RL7 operates as a dual simultaneous sampling SAR ADC. Key subsystems include: (1) Dual Sample-and-Hold – two identical sample-and-hold circuits capture the voltage on VIN_A and VIN_B simultaneously when the CONVST signal is asserted; both inputs are sampled at the same instant, preserving the phase relationship between the two channels; the hold capacitors maintain the sampled voltage during the subsequent conversion; (2) SAR ADC Core – a 14-bit successive approximation register ADC converts each held sample; the conversion uses a binary search algorithm with a capacitive DAC; the ADC converts channel A first, then channel B; each conversion takes approximately 1.6 microseconds; the total throughput is 500kSPS per channel (1 MSPS total); (3) Input Range Selection – the RANGE pin selects between +/-5V and +/-10V input ranges; in +/-10V mode, the input attenuator divides the signal by 4 before the ADC core (which has a +/-2.5V range); in +/-5V mode, the attenuator divides by 2; the input impedance is 1.4MOhm, allowing direct connection to many signal sources without buffering; (4) Reference – an internal 2.5V bandgap reference with on-chip buffer drives the ADC DAC; the REFSEL pin selects internal or external reference; when using an external reference, the on-chip buffer reduces the reference drive requirement; (5) SPI Interface – a standard SPI interface (CS, SCLK, SDI, SDO) with daisy-chain capability; the conversion results are clocked out MSB first as 14-bit two’s complement values; in daisy-chain mode, multiple devices are connected in series (SDO of device N connects to SDI of device N-1), allowing all channels to be read with a single CS assertion.

Pin Description: AD7367BRUZ-500RL7 Pin Definition and Functions
Pin Name Function
1 VIN_A Analog input channel A
2 VIN_B Analog input channel B
3-5 AGND Analog ground
6 AVDD Analog supply (5V)
7 RANGE Input range select (low=+/-10V, high=+/-5V)
8 REFSEL Reference select (low=external, high=internal)
9 REFIN/OUT External reference input / internal reference output
10 CONVST Conversion start (active low, samples both channels)
11 CS Chip select (active low)
12 SCLK SPI clock
13 SDI SPI data in (daisy-chain input)
14 SDO SPI data out (conversion results)
15 BUSY Conversion busy indicator (low=converting)
16 DVDD Digital supply (2.7V to 5.25V)
17 VIO I/O supply (2.7V to 5.25V, sets SDO logic levels)
Application Scenarios: In which products and applications is AD7367BRUZ-500RL7 used
  • Motor current sensing: simultaneously sample 2 phase currents via shunt resistors, +/-5V range matches amplifier output, 500kSPS for FOC at 20kHz PWM
  • Power metering: simultaneously sample voltage and current for instant power calculation, +/-10V range for PT/CT secondary inputs
  • Multi-device DAQ: daisy-chain 4x AD7367 for 8-channel simultaneous sampling on a single SPI bus
  • Protection relay: simultaneous V and I sampling for distance relay impedance calculation, 14-bit resolution for accuracy
Alternative Models: What chips are recommended as replacements for AD7367BRUZ-500RL7
Manufacturer Part Number Package Notes
ADI AD7366BRUZ-500RL7 TSSOP-28 16-bit version, same pinout
ADI AD7380-4BCPZ LFCSP-24 Quad 16-bit 4MSPS simultaneous ADC
TI ADS8353IRSMR VQFN-24 Dual 16-bit 500kSPS simultaneous
ADI AD7382-4BCPZ LFCSP-24 Quad 14-bit 4MSPS simultaneous ADC

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1