Opens in a new tab

AD780ARZ-REEL7

2.5V/3.0V precision voltage reference, 3ppm/C, +/-1mV, SOIC-8, bandgap, temp output, series/shunt

7543

Effective Inventory

Image for reference only

Manufacturer Part:

AD780ARZ-REEL7

Package:

SOIC-8 (5.00 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD780ARZ-REEL7 from Analog Devices is an ultrahigh precision 2.5V/3.0V pin-programmable bandgap voltage reference in a SOIC-8 package. With 3ppm/C max drift and +/-1mV initial accuracy, it provides exceptional stability for high-resolution ADC and DAC reference applications.

Key Specifications

Output Voltage 2.5 V or 3.0 V (pin-programmable)
Initial Accuracy +/-1 mV (B grade max)
Temperature Drift 3 ppm/C (B grade max)
Input Voltage 4.0 V to 36 V
Output Noise 100 nV/sqrtHz (typical)
Quiescent Current 1 mA (max)
Operating Temperature -40C to +85C

Features

  • 2.5V or 3.0V pin-programmable output for flexible reference selection
  • 3ppm/C max temperature drift for precision stability
  • +/-1mV max initial accuracy (B grade) without external trimming
  • 100nV/sqrtHz low noise for high-resolution converter references
  • Series or shunt mode operation for positive/negative references
  • Temperature output pin for simultaneous temperature sensing

Applications

  • High-resolution ADC and DAC voltage reference
  • Precision instrumentation and measurement systems
  • Industrial process control reference standards
  • Calibration equipment voltage standards
Product Introduction: AD780ARZ-REEL7 Product Introduction

The AD780ARZ-REEL7 from Analog Devices is an ultrahigh precision bandgap voltage reference providing pin-programmable 2.5V or 3.0V output in a SOIC-8 tape-and-reel package. The device accepts input voltages from 4.0V to 36V and delivers a stable reference with 3ppm/C maximum temperature drift (B grade) and +/-1mV maximum initial accuracy. The 100nV/sqrtHz output noise makes it ideal for high-resolution ADC and DAC applications where reference noise directly limits converter performance. A unique low-headroom design enables 3.0V output from a 5V +/-10% supply, providing 20% more ADC dynamic range compared to 2.5V references. The AD780 can source or sink up to 10mA and operates in both series and shunt modes, enabling positive or negative reference voltages without external components. A temperature output pin provides a voltage proportional to temperature for simultaneous temperature measurement. The device is stable with any load capacitance when a 1uF bypass capacitor is used.

Working Principle: AD780ARZ-REEL7 Working Principle

The AD780ARZ-REEL7 uses a precision bandgap reference with laser-trimmed resistors. (1) Bandgap Core: Two NPN transistors (Q6, Q7) with 12:1 emitter area ratio generate a PTAT (proportional to absolute temperature) voltage across resistor R5. This PTAT voltage, combined with the VBE of Q7 (which has a negative temperature coefficient), produces a temperature-stable bandgap voltage Vbg. (2) Output Programming: The output voltage is set to 2.5V or 3.0V by connecting the O/P SELECT pin (pin 8) to GND for 3.0V or leaving it unconnected for 2.5V. Internal resistors R13-R15 are configured accordingly in the feedback loop. (3) Low Headroom: A unique amplifier design minimizes the required input-to-output voltage differential, enabling 3.0V output from inputs as low as 4.5V. (4) Temperature Output: The PTAT voltage drives a buffer that outputs approximately 500mV at 25C with a 2mV/C slope, enabling temperature sensing without additional components. (5) Noise Reduction: External capacitors on the NR pin can further reduce output noise below the already low 100nV/sqrtHz. (6) Shunt Mode: By connecting VIN to VOUT, the device operates as a 2-terminal shunt regulator, providing +/-2.5V or +/-3.0V references.

Pin Description: AD780ARZ-REEL7 Pin Definition and Functions
Pin Name Type Function
1 DNC – Do not connect
2 VIN Power Input supply (4-36V)
3 TEMP Output Temperature output (~2mV/C)
4 GND Ground Ground
5 TRIM Analog Optional fine-trim input
6 VOUT Output Reference output (2.5V or 3.0V)
7 DNC – Do not connect
8 O/P SELECT Input Output select (float=2.5V, GND=3.0V)
Application Scenarios: In which products and applications is AD780ARZ-REEL7 used
  • High-resolution ADC and DAC voltage reference with 3ppm/C drift
  • Precision instrumentation and measurement systems with +/-1mV accuracy
  • Industrial process control reference standards at 2.5V or 3.0V
  • Calibration equipment voltage standards with temperature output
Alternative Models: What chips are recommended as replacements for AD780ARZ-REEL7
Manufacturer Part Number Package Notes
ADI AD780BNZ DIP-8 Through-hole, B grade
ADI ADR431BRZ SOIC-8 2.5V, eFET architecture
TI REF5025IDR SOIC-8 2.5V, 3ppm/C
Maxim MAX6126A25+T SOIC-8 2.5V, 0.5ppm/C

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1