Opens in a new tab

AD8226ARZ

RRIO instrumentation amp, G=1-1000, 1.7nV/√Hz, 1.7-36V, SOIC-8

6340

Effective Inventory

Image for reference only

Manufacturer Part:

AD8226ARZ

Package:

SOIC-8 (5.0 x 4.0 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AD8226ARZ is a wide supply range, rail-to-rail output instrumentation amplifier from Analog Devices with 0.15% max gain error, 1.2nA input bias current, and 1.7nV/√Hz voltage noise in an SOIC-8 package.

Key Specifications

Supply Voltage Range 1.7V to ±18V (single or dual)
Gain Range 1 to 1000 (single resistor set)
Gain Error (G=1) 0.02% typical
Gain Error (G=100) 0.15% max
Input Bias Current 1.2nA typical
Input Offset Voltage 125µV typical
Voltage Noise (1kHz) 1.7nV/√Hz at G≥100
Common-Mode Rejection 80dB at G=1, 120dB at G≥100
Output Swing Rail-to-rail (within 10mV of rails)
Bandwidth (G=1) 1.5 MHz
Slew Rate 1V/µs
Operating Temperature -40°C to +85°C
Package SOIC-8

Features

  • Wide supply range: 1.7V to 36V (single supply) or ±18V (dual)
  • Rail-to-rail output swing maximizes dynamic range
  • Single resistor gain setting from 1 to 1000
  • Low voltage noise: 1.7nV/√Hz at G≥100
  • Excellent CMRR: 120dB at G≥100
  • Input protection to ±40V beyond supplies
  • Overvoltage protected inputs without latch-up
  • Compatible with AD620 pinout

Applications

  • Medical instrumentation and ECG
  • Industrial process control
  • Bridge transducer amplifiers
  • Data acquisition systems
  • Battery-powered instruments
Product Introduction: AD8226ARZ Product Introduction

The AD8226ARZ is a versatile instrumentation amplifier from Analog Devices that combines wide supply range (1.7V to 36V), rail-to-rail output, and excellent precision in an SOIC-8 package. The gain is set by a single external resistor from 1 to 1000, with gain error as low as 0.02% at G=1 and 0.15% at G=100. The input stage provides 1.2nA input bias current and 125µV offset voltage, while the low 1.7nV/√Hz voltage noise at gains of 100 or higher makes it ideal for precision measurement. CMRR reaches 120dB at gains ≥100, and the input protection circuitry can withstand ±40V beyond the supply rails without damage or latch-up.

Working Principle: AD8226ARZ Working Principle

The AD8226 uses a classic three-op-amp instrumentation amplifier architecture optimized for low noise and wide supply range. The input stage consists of two matched differential amplifiers that buffer and pre-amplify the input signal. The gain-setting resistor connects between the RG pins, controlling the transconductance of the input pair. At G=1, the input stage has unity gain; as the gain resistor value decreases, the input stage gain increases proportionally, simultaneously improving CMRR and reducing referred input noise. The output stage is a difference amplifier that converts the differential signal to single-ended with rail-to-rail output capability. The input protection network uses current-limiting resistors and clamp diodes that protect the inputs to ±40V beyond the supplies without causing latch-up or affecting accuracy during normal operation. The rail-to-rail output stage uses a complementary push-pull architecture that drives the output to within 10mV of either supply rail under light loads.

Pin Description: AD8226ARZ Pin Definition and Functions
Pin Name Type Description
1 -IN Analog Input Inverting input
2 RG Gain Gain resistor terminal 1
3 +V_S Power Positive supply
4 VOUT Output Amplifier output
5 REF Reference Reference voltage input (typically GND)
6 -V_S Power Negative supply (or GND for single supply)
7 RG Gain Gain resistor terminal 2
8 +IN Analog Input Non-inverting input
Application Scenarios: In which products and applications is AD8226ARZ used
  • Medical ECG: 120dB CMRR at G≥100 rejects 50/60Hz common-mode interference; 1.7nV/√Hz noise preserves signal integrity
  • Bridge Sensors: Single resistor gain setting simplifies strain gauge and load cell interfacing from 1 to 1000
  • Battery Instruments: 1.7V minimum supply voltage enables operation from single Li-ion or 2x AAA cells
  • Industrial Process Control: ±40V input protection survives fault conditions in harsh 4-20mA loop environments
  • Data Acquisition: Rail-to-rail output maximizes ADC dynamic range in single-supply systems
Alternative Models: What chips are recommended as replacements for AD8226ARZ
Model Manufacturer Key Difference Package Specs
AD8227ARZ ADI Higher bandwidth (2.2MHz), lower noise – –
AD620ARZ ADI Industry standard, ±2.3V to ±18V, non-RR output – –
INA128UA TI 1.3MHz, 10nV/√Hz, SOIC-8 – –
INA821AIDR TI 35nV/√Hz, 80V input, higher voltage range – –
MCP6N11-010E/SN Microchip Zero-drift, 1.8V minimum, MSOP-8 – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1