Product Overview
The AD8418BRMZ-RL from Analog Devices is a bidirectional, zero-drift current sense amplifier with a fixed gain of 20 V/V in an MSOP-8 package. It features 0.1 µV/°C offset drift, ±400 µV max offset over temperature, and a -2 V to +70 V input common-mode range, making it ideal for high-side current sensing in automotive and industrial systems.
Key Specifications
| Gain | 20 V/V (fixed) |
| Gain Error | ±0.15% max over temperature |
| Offset Voltage (RTI) | ±200 µV typ, ±400 µV max |
| Offset Drift | 0.1 µV/°C typ |
| Common-Mode Range | -2 V to +70 V (operating) |
| CMRR | 90 dB (DC), 86 dB (DC to 10 kHz) |
| Bandwidth (-3 dB) | 250 kHz |
| Supply Voltage | 2.7 V to 5.5 V |
| Supply Current | 2.6 mA typ |
| Package | MSOP-8 |
Features
- Zero-drift core with 0.1 µV/°C typical offset drift
- Integrated EMI filters for noisy environments
- Bidirectional current measurement capability
- Automotive qualified (AD8418W variant)
- Buffered output directly interfaces with ADCs
- Motor control high-side current sensing
- Battery management current monitoring
- Solenoid control and diagnostics
- Power supply load current measurement
- Automotive current monitoring and protection
- Motor Control Current Sensing: High-side shunt measurement in three-phase BLDC and PMSM motor drives with PWM common-mode rejection
- Battery Management: Bidirectional charge and discharge current monitoring in 48 V and 12 V battery systems
- Solenoid Control: Peak and hold current measurement for automotive transmission and fuel injector solenoids
- Power Supply Monitoring: Load current measurement and overcurrent protection in telecom and server power supplies
- Industrial Process Control: 4-20 mA loop current measurement with high common-mode rejection
Applications
Product Introduction: AD8418BRMZ-RL Product Introduction
The AD8418BRMZ-RL from Analog Devices is a high-voltage, high-resolution bidirectional current sense amplifier with a fixed gain of 20 V/V in an 8-lead MSOP package. Using a zero-drift core architecture, it achieves only 0.1 µV/°C typical offset drift and ±400 µV maximum offset voltage over the full -40°C to +125°C temperature range. The gain error is specified at ±0.15% maximum over temperature. The device accepts common-mode voltages from -2 V to +70 V while operating from a 2.7 V to 5.5 V supply, enabling high-side current sensing in 48 V automotive and industrial power systems. Integrated EMI filters reject high-frequency interference from PWM motor drive signals. The buffered output directly drives ADC inputs without additional buffer stages. The bidirectional architecture supports both charging and discharging current measurement using two reference pins.
Working Principle: AD8418BRMZ-RL Working Principle
The AD8418 uses a zero-drift chopped amplifier core to achieve ultra-low offset and drift. The input stage includes integrated EMI low-pass filters that reject high-frequency common-mode and differential noise before the signal reaches the amplifier. The differential voltage across the shunt resistor is amplified by the fixed gain of 20 V/V through a precision resistor network. The zero-drift architecture uses auto-zeroing techniques where the amplifier periodically measures and cancels its own offset, resulting in the 0.1 µV/°C drift specification. The output stage is a buffered voltage source capable of driving ADC inputs directly. Two reference pins (VREF1 and VREF2) set the output baseline voltage: when tied together and connected to VS/2, the output sits at VS/2 with zero differential input, allowing bidirectional current measurement. When one reference pin is grounded, unidirectional measurement is supported.
Pin Description: AD8418BRMZ-RL Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | Input | Non-inverting shunt voltage input (high-side connection) |
| 2 | VIN- | Input | Inverting shunt voltage input (low-side connection) |
| 3 | VREF2 | Input | Reference voltage input 2 (for bidirectional output offset) |
| 4 | GND | Ground | Device ground |
| 5 | VOUT | Output | Amplified output voltage (gain × Vshunt + Vref) |
| 6 | VS | Power | Supply voltage (2.7 V to 5.5 V) |
| 7 | VREF1 | Input | Reference voltage input 1 (for bidirectional output offset) |
| 8 | NC | – | No connect |
Application Scenarios: In which products and applications is AD8418BRMZ-RL used
Alternative Models: What chips are recommended as replacements for AD8418BRMZ-RL
| Model | Manufacturer | Gain | Vcm | Vos | Package | Notes |
|---|---|---|---|---|---|---|
| AD8418WBRMZ | Analog Devices | 20 V/V | -2 to 70 V | 400 µV | MSOP-8 | Automotive qualified |
| INA240A1DR | Texas Instruments | 20 V/V | -4 to 80 V | 25 µV | SOIC-8 | Lower offset, enhanced PWM |
| MAX9918FETA+T | Analog Devices | 50 V/V | -20 to 75 V | 500 µV | SOT-23-8 | Higher gain, smaller package |
| TSC2011IST | STMicroelectronics | 20 V/V | -4 to 70 V | 200 µV | MSOP-8 | Similar performance |
| AD8206BRMZ | Analog Devices | 20 V/V | -2 to 65 V | 1 mV | MSOP-8 | Legacy, higher offset |
Recommend Parts

TMP275AIDR
0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC
Brand: TI
Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)
IN STOCK: 3681pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFS4227TRLPBF
IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)
Brand: infineon
Package: D2PAK (TO-263)
IN STOCK: 4334pcs
Cargo cycle: 3-7 Days
The minimum order is 1

CD4070BM96
Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14
Brand: TI
Package: SOIC-14 (8.75 x 3.9 x 1.5mm)
IN STOCK: 4245pcs
Cargo cycle: 3-7 Days
The minimum order is 1

LP2980IM5-5.0
50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)
IN STOCK: 2557pcs
Cargo cycle: 3-7 Days
The minimum order is 1








