Opens in a new tab

AD8541AKSZ-REEL7

CMOS RRIO op amp, 1MHz, 45uA, 4pA Ib, SC70-5

13434

Effective Inventory

Image for reference only

Manufacturer Part:

AD8541AKSZ-REEL7

Package:

5-Lead SC70 (2.0 x 1.25 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD8541AKSZ-REEL7 is an Analog Devices single CMOS rail-to-rail general-purpose op amp with 2.7V-5.5V supply, 1MHz GBW, 45uA supply current, 4pA input bias current, and AEC-Q100 qualification. Packaged in 5-lead SC70, -40C to +125C.

Key Specifications

Channels 1 (single)
Supply Voltage 2.7 V to 5.5 V
GBW 1 MHz
Slew Rate 0.92 V/us
Input Offset Voltage 1 mV typ, 6 mV max
Input Bias Current 4 pA typ
Supply Current 45 uA per amplifier
Package SC70-5

Features

  • Single-supply 2.7V to 5.5V operation
  • Rail-to-rail input and output
  • 1MHz gain-bandwidth product
  • Only 45uA supply current per amplifier
  • Ultra-low 4pA input bias current
  • No phase reversal on overdrive
  • Unity gain stable
  • AEC-Q100 qualified

Applications

  • ASIC input/output buffer amplifiers
  • Sensor interfaces and photodiode amps
  • Medical instrumentation
  • Portable and battery-powered systems
Product Introduction: AD8541AKSZ-REEL7 Product Introduction

The AD8541AKSZ-REEL7 is an Analog Devices single CMOS rail-to-rail input and output operational amplifier in a tiny 5-lead SC70 package. The device operates from a single 2.7V to 5.5V supply with only 45uA supply current, making it ideal for battery-powered and low-power applications. The 1MHz gain-bandwidth product and 0.92V/us slew rate provide adequate speed for audio and general-purpose signal processing. The rail-to-rail input and output capability maximizes dynamic range in single-supply systems by allowing the input common-mode voltage to extend from the negative rail to the positive rail, and the output to swing within millivolts of both rails. The ultra-low 4pA input bias current (CMOS input) makes the device suitable for high-impedance sensor interfaces, photodiode amplifiers, and integrators. The AEC-Q100 qualification supports automotive applications. The no-phase-reversal feature ensures the output does not invert when the input is overdriven beyond the common-mode range.

Working Principle: AD8541AKSZ-REEL7 Working Principle

The AD8541AKSZ-REEL7 uses a CMOS complementary input pair architecture to achieve rail-to-rail input common-mode range. Two complementary differential pairs (N-channel and P-channel) are connected in parallel: the P-channel pair operates when the common-mode voltage is near the positive rail, and the N-channel pair operates near the negative rail, with both pairs active in the middle range. The output stage is a Class-AB CMOS push-pull configuration that swings to within millivolts of both supply rails with light loads. The internal compensation network provides 1MHz unity-gain bandwidth with adequate phase margin for stability in unity-gain configurations. The CMOS input stage provides the extremely low 4pA input bias current, which is essentially the gate leakage current of the input MOSFETs.

Pin Description: AD8541AKSZ-REEL7 Pin Definition and Functions
Pin Mnemonic Description
1 OUT Output
2 V- Negative supply (or GND)
3 IN+ Non-inverting input
4 IN- Inverting input
5 V+ Positive supply
Application Scenarios: In which products and applications is AD8541AKSZ-REEL7 used
  • Photodiode transimpedance amplifier with 4pA Ib minimizing DC error in 5V single-supply system
  • Portable medical instrument front-end with 45uA IQ and rail-to-rail output maximizing ADC dynamic range
  • Automotive sensor signal conditioning with AEC-Q100 qualification and no phase reversal
  • Battery-powered active filter at 2.7V minimum supply with 1MHz GBW
Alternative Models: What chips are recommended as replacements for AD8541AKSZ-REEL7
Model Manufacturer Key Difference
MCP6001T-I/SN Microchip 1MHz, SC70-5, similar spec
TLV341AKDBVR TI 1MHz, SOT-23-5, lower Vos
AD8541ARTZ-REEL7 ADI Same die, SOT-23-5 package
AD8542ARMZ-REEL ADI Dual version, MSOP-8

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1