Opens in a new tab

AD8605ARTZ-REEL7

Precision CMOS op-amp, 45uV Vos, 4.8nV/sqrtHz, RRIO, SOT-23-5

6940

Effective Inventory

Image for reference only

Manufacturer Part:

AD8605ARTZ-REEL7

Package:

SOT-23-5 (2.90 x 1.60 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD8605ARTZ-REEL7 from Analog Devices is a precision, low-noise, rail-to-rail input and output single CMOS op-amp in a SOT-23-5 package. With 45 µV offset, 0.5 µV/°C drift, and 4.8 nV/√Hz noise, it is designed for precision signal conditioning in battery-powered and space-constrained applications.

Key Specifications

Offset Voltage 45 µV (typ), 400 µV (max)
Offset Drift 0.5 µV/°C (typ)
Input Bias Current 0.2 pA (typ)
Voltage Noise 4.8 nV/√Hz @ 1 kHz
GBW 5.5 MHz
Slew Rate 3 V/µs
Supply Voltage 2.7 V to 5.5 V
Supply Current 850 µA (typ)
Operating Temperature -40°C to +125°C
Package SOT-23-5

Features

  • Ultra-low 45 µV typical offset voltage with 0.5 µV/°C drift
  • Rail-to-rail input and output for maximum dynamic range
  • Low 4.8 nV/√Hz voltage noise
  • Sub-pA input bias current for high-impedance sensor interfaces
  • 5.5 MHz GBW with only 850 µA supply current
  • Single-supply operation from 2.7 V to 5.5 V

Applications

  • Precision sensor signal conditioning
  • Medical instrumentation amplifiers
  • Photodiode transimpedance amplifiers
  • Battery-powered measurement systems
  • Active filters and integrators
Product Introduction: AD8605ARTZ-REEL7 Product Introduction

The AD8605ARTZ-REEL7 from Analog Devices is a single-channel precision CMOS operational amplifier in a compact SOT-23-5 surface-mount package. The device combines ultra-low input offset voltage (45 µV typical), low offset drift (0.5 µV/°C), low voltage noise (4.8 nV/√Hz at 1 kHz), and sub-pA input bias current (0.2 pA typical) in a rail-to-rail input/output architecture. The 5.5 MHz gain-bandwidth product and 3 V/µs slew rate support a wide range of precision signal conditioning applications while consuming only 850 µA supply current from a 2.7 V to 5.5 V single supply. The SOT-23-5 package minimizes board area for space-constrained designs. The REEL7 suffix indicates 3000-unit tape and reel packaging. The AD8605 is part of a family that includes the dual AD8606 and quad AD8608 variants.

Working Principle: AD8605ARTZ-REEL7 Working Principle

The AD8605ARTZ uses a proprietary DigiTrim CMOS process with post-package trimming to achieve the 45 µV typical offset voltage. The input stage uses a folded-cascode architecture with rail-to-rail input common-mode range achieved by paralleling N-channel and P-channel input pairs. A transition region exists between the two pairs (approximately 1.5 V below VDD), but DigiTrim minimizes the offset shift across this region. The output stage uses a common-source PMOS driver with active pull-up, achieving rail-to-rail output swing within millivolts of both supply rails at light loads. The 4.8 nV/√Hz voltage noise is among the lowest for CMOS amplifiers, achieved through careful design of the input pair geometry and bias current optimization. The internal compensation provides stable unity-gain operation with capacitive loads up to several hundred picofarads.

Pin Description: AD8605ARTZ-REEL7 Pin Definition and Functions
Pin Name Function
1 -IN Inverting input
2 V- Negative supply (or GND for single-supply operation)
3 +IN Non-inverting input
4 OUT Amplifier output
5 V+ Positive supply (2.7 V to 5.5 V)
Application Scenarios: In which products and applications is AD8605ARTZ-REEL7 used
  • Precision Sensor Conditioning: Transimpedance and voltage amplification for strain gauges, pressure sensors, and RTD interfaces with sub-pA bias current
  • Medical Instrumentation: ECG/EEG preamplifier stages requiring low noise, low offset, and high input impedance
  • Photodiode TIA: Low-noise transimpedance amplifier for precision optical measurement with sub-pA bias current
  • Battery-Powered Measurement: Portable multimeter and data logger analog front-ends with 850 µA supply current
  • Active Filters: Precision Sallen-Key and MFB filters for anti-aliasing and signal conditioning with low offset drift
Alternative Models: What chips are recommended as replacements for AD8605ARTZ-REEL7
Model Manufacturer Vos Noise GBW Package Notes
AD8606ARMZ-REEL7 ADI 45 µV 4.8 nV/√Hz 5.5 MHz MSOP-8 Dual version
MCP6001T-I/SN Microchip 200 µV 19 nV/√Hz 1 MHz SOT-23-5 Lower cost, lower perf
OPA333AIDBVR TI 2 µV 55 nV/√Hz 350 kHz SOT-23-5 Zero-drift, lower noise BW
ADA4522-1ARJZ-R7 ADI 5 µV 5.8 nV/√Hz 2.7 MHz SOT-23-5 Zero-drift, higher voltage
TLV333AIDBVR TI 6 µV 55 nV/√Hz 350 kHz SOT-23-5 Zero-drift, micro-power

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1