Opens in a new tab

ADA4522-1ARMZ-R7

55V zero-drift op-amp, 5μV Vos, 5.8nV/√Hz noise, RR-output, MSOP-8

7890

Effective Inventory

Image for reference only

Manufacturer Part:

ADA4522-1ARMZ-R7

Package:

MSOP-8 (3 x 3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADA4522-1ARMZ-R7 from Analog Devices is a single-channel, 55V, zero-drift, ultralow noise, rail-to-rail output operational amplifier in an MSOP-8 package. With 5μV max offset voltage, 22nV/°C drift, and 5.8nV/√Hz noise density, it delivers precision amplification for industrial, automotive, and measurement applications.

Key Specifications

Supply Voltage Range 4.5V to 55V (±2.25V to ±27.5V)
Offset Voltage 5 μV (max)
Offset Voltage Drift 22 nV/°C (max)
Voltage Noise Density 5.8 nV/√Hz (typical)
Input Bias Current 50 pA (typical)
Gain Bandwidth Product 2.7 MHz
Slew Rate 1.7 V/μs
CMRR 160 dB (typical)
Package MSOP-8
Operating Temperature -40°C to +125°C

Features

  • Ultralow offset voltage of 5μV max with 22nV/°C drift
  • Low voltage noise density of 5.8nV/√Hz for precision signal conditioning
  • Rail-to-rail output with ground-sensing input capability
  • Wide supply range: 4.5V to 55V single or ±2.25V to ±27.5V dual
  • Integrated EMI filtering for enhanced noise immunity
  • AEC-Q100 qualified for automotive applications
  • Unity-gain stable with 3MHz crossover frequency

Applications

  • Precision shunt current sensing in battery management systems
  • Thermocouple and RTD temperature measurement front-ends
  • Load cell and bridge transducer signal conditioning
  • PLC analog input/output modules
  • Automotive sensor signal amplification
Product Introduction: ADA4522-1ARMZ-R7 Product Introduction

The ADA4522-1ARMZ-R7 is a single-channel zero-drift operational amplifier from Analog Devices, optimized for total accuracy over time, temperature, and voltage conditions. It features an ultralow input offset voltage of 5μV maximum with drift of only 22nV/°C, achieved through an advanced chopping technique that continuously corrects offset errors. The device delivers low voltage noise density of 5.8nV/√Hz typical, making it suitable for amplifying very small signals in precision measurement applications. With a wide operating voltage range of 4.5V to 55V, ground-sensing inputs, rail-to-rail output, and integrated EMI filters, the ADA4522-1 is AEC-Q100 qualified for automotive applications and specified over the -40°C to +125°C temperature range.

Working Principle: ADA4522-1ARMZ-R7 Working Principle

The ADA4522-1 uses a chopper-stabilized (zero-drift) architecture. (1) The input chopping stage modulates the input signal and amplifier offset to a higher frequency using a pair of input switches, moving the DC offset and 1/f noise away from the baseband. (2) The main amplifier provides gain with its inherent offset and 1/f noise now modulated to the chopping frequency, while the desired input signal passes through unaffected. (3) The output chopping stage demodulates the amplified input signal back to baseband while modulating the residual offset and 1/f noise to the chopping frequency, where they are filtered by the internal low-pass network. This auto-zeroing process runs continuously, eliminating offset drift over time and temperature. The integrated EMI filters reject high-frequency interference before it can be rectified by the input stage.

Pin Description: ADA4522-1ARMZ-R7 Pin Definition and Functions
Pin Name Function
1 NC No connection
2 -IN Inverting input
3 +IN Non-inverting input
4 V- Negative supply
5 NC No connection
6 OUT Output
7 V+ Positive supply
8 NC No connection
Application Scenarios: In which products and applications is ADA4522-1ARMZ-R7 used
  • High-precision shunt current sensing in battery management and power monitoring systems
  • Thermocouple and RTD temperature measurement with microvolt-level accuracy
  • Load cell and strain gauge bridge amplification requiring low drift and noise
  • Programmable logic controller (PLC) analog I/O modules
  • Automotive on-board charger and DC-DC converter current sensing
Alternative Models: What chips are recommended as replacements for ADA4522-1ARMZ-R7
Model Manufacturer Key Difference
ADA4522-2ARMZ Analog Devices Dual channel version, MSOP-8
ADA4522-1ARZ-R7 Analog Devices SOIC-8 package option
ADA4523-1ARMZ Analog Devices Higher BW (4.5MHz), lower noise
MAX44250 Maxim 36V zero-drift, SOT-23-6
OPA2189AIDR TI 36V zero-drift dual, SOIC-8

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1