Opens in a new tab

ADG1208YRUZ-REEL7

8-channel ±15V CMOS analog multiplexer, <1pC charge injection, 120R Ron, TSSOP-16

3200

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1208YRUZ-REEL7

Package:

16-TSSOP (5.00 x 4.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG1208YRUZ-REEL7 is an Analog Devices low capacitance, 8-channel iCMOS multiplexer with ±15 V/+12 V supply capability. It features less than 1 pC charge injection over the full signal range, 1 pF off capacitance, 120 Ω on resistance, and rail-to-rail operation. The device is packaged in a 16-lead TSSOP and operates from -40°C to +85°C.

Key Specifications

Channels 8 single-ended
On Resistance 120 Ω
Charge Injection <1 pC over full signal range
Off Capacitance 1 pF
Supply Range ±15 V / +12 V (33 V max)
Package 16-Lead TSSOP

Features

  • <1 pC charge injection over full signal range
  • 1 pF off capacitance
  • 120 Ω on resistance
  • Fully specified at ±15 V/+12 V
  • 3 V logic compatible inputs
  • Rail-to-rail operation
  • Break-before-make switching
  • Typical power consumption < 0.03 µW

Applications

  • Data acquisition systems
  • Automatic test equipment
  • Audio and video routing
  • Sample-and-hold systems
Product Introduction: ADG1208YRUZ-REEL7 Product Introduction

The Analog Devices ADG1208YRUZ-REEL7 is an 8-channel single-ended CMOS analog multiplexer built on the iCMOS (industrial CMOS) process, combining high-voltage capability with ultra-low charge injection. The device switches one of eight inputs to a common output as determined by 3-bit binary address lines A0, A1, and A2. The <1 pC charge injection over the full signal range is the defining feature—critical in data acquisition and sample-and-hold systems where charge injection introduces voltage errors that degrade measurement accuracy. The 120 ohm on-resistance and 2 ohm on-resistance flatness maintain signal integrity with minimal voltage drop and distortion. The device operates from dual supplies up to ±15V or single supply +12V, with 3V logic-compatible inputs enabling direct interface to low-voltage microcontrollers. Break-before-make switching action prevents momentary channel shorting during transitions. The iCMOS process enables 33V operation with dramatically lower power consumption (<0.03 uW typical) compared to conventional high-voltage CMOS, making the ADG1208 ideal for portable and battery-powered instruments.

Working Principle: ADG1208YRUZ-REEL7 Working Principle

The ADG1208 uses a 3-bit binary address (A0, A1, A2) to select one of eight input channels (S1-S8) and connect it to the common output (D). An active-low enable (EN) input disables all channels when deasserted, placing the device in a high-impedance state. Each switch channel conducts equally well in both directions with rail-to-rail signal handling. The iCMOS process achieves ultra-low charge injection through carefully balanced internal charge compensation circuits—when a switch transitions, the parasitic gate charge coupled to the signal path is minimized to <1 pC across the entire ±15V signal range. Break-before-make timing ensures that the currently selected channel is disconnected before the new channel is connected, preventing momentary short circuits between input sources. The on-resistance of 120 ohms remains relatively flat (2 ohm variation) across the signal range, minimizing gain error in precision measurement systems.

Pin Description: ADG1208YRUZ-REEL7 Pin Definition and Functions
Pin Mnemonic Description
1 EN Enable input (active low)
2-4 A0-A2 Address inputs
5-8,10-13 S1-S8 Analog input channels
9 GND Ground
14 D Drain (common output)
15 VSS Negative supply (-15V max)
16 VDD Positive supply (+15V max)
Application Scenarios: In which products and applications is ADG1208YRUZ-REEL7 used
  • Precision data acquisition system with 16-channel differential scanning using two ADG1208 devices, <1pC charge injection preserving 24-bit ADC accuracy
  • Medical EEG/ECG channel selection where ultra-low charge injection prevents stimulus artifacts in patient-connected electrodes
  • Battery-powered field instrument with <0.03uW mux power consumption extending operating life
  • Automatic test equipment (ATE) pin electronics with ±15V signal range and 3V logic control
Alternative Models: What chips are recommended as replacements for ADG1208YRUZ-REEL7
Model Manufacturer Key Difference
ADG1209YRUZ ADI 4-channel differential version
ADG1206BRUZ ADI 16-channel mux, same iCMOS family
DG408DY Vishay 8-ch mux, higher Ron (80R), higher charge injection
MUX36S08 TI 8-ch, 36V, very low leakage, lower Ron

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1