Opens in a new tab

ADG1608BRUZ

8-ch mux, 4.5Ohm RON, +/-8V dual supply, TSSOP-16, low distortion signal routing

9195

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1608BRUZ

Package:

TSSOP-16 (5.00 x 4.40 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADG1608BRUZ from Analog Devices is a 4.5 Ohm RON, 8-channel multiplexer in a TSSOP-16 package. Operating from 3.3V to 16V single supply or +/-3.3V to +/-8V dual supply, it provides low distortion signal routing for data acquisition and audio applications.

Key Specifications

RON (typical) 4.5 Ohm
RON (max over temp) 8 Ohm
RON Flatness 1 Ohm
Channels 8:1 multiplexer
Continuous Current 470 mA (max)
Single Supply 3.3 V to 16 V
Dual Supply +/-3.3 V to +/-8 V
Bandwidth 40 MHz
THD+N 0.04% (typical)
Operating Temperature -40C to +125C

Features

  • 4.5 Ohm typical on-resistance with 1 Ohm flatness
  • 470mA continuous current handling
  • Break-before-make switching action
  • 3V logic-compatible inputs (no VL supply required)
  • Ultra-low power dissipation less than 8nW
  • 40MHz bandwidth for wideband signal routing

Applications

  • Data acquisition systems with low distortion requirements
  • Audio signal routing and mixing consoles
  • Medical instrumentation and patient monitoring
  • Automatic test equipment and relay replacement
Product Introduction: ADG1608BRUZ Product Introduction

The ADG1608BRUZ from Analog Devices is a monolithic CMOS analog multiplexer comprising eight single channels in a TSSOP-16 package. The device switches one of eight inputs to a common output as determined by 3-bit binary address lines A0, A1, and A2. An EN input enables or disables the device. The 4.5 Ohm typical on-resistance with 1 Ohm flatness ensures minimal signal distortion, achieving THD+N of 0.04%. The device operates from 3.3V to 16V single supply or +/-3.3V to +/-8V dual supply with 470mA continuous current handling. 3V logic-compatible inputs eliminate the need for a separate VL logic supply. Break-before-make switching prevents channel-to-channel shorting, and ultra-low power dissipation below 8nW makes the device ideal for battery-powered instruments.

Working Principle: ADG1608BRUZ Working Principle

The ADG1608BRUZ uses iCMOS technology combining high-voltage CMOS with low-voltage CMOS. (1) Switch Core: Each of the eight channels contains a CMOS transmission gate that conducts equally well in both directions when on. The transmission gate uses complementary N-channel and P-channel MOSFETs in parallel to minimize on-resistance variation across the analog input range, achieving 1 Ohm flatness. (2) Address Decoding: A 3-to-8 line decoder translates the A0-A2 address inputs into one-of-eight channel select signals. The EN input gates the decoder output, disabling all channels when low. (3) Break-Before-Make: A delay circuit ensures the previously selected channel turns off before the new channel turns on, preventing momentary channel-to-channel shorting. (4) Level Shifting: Internal level shifters translate the 3V logic-level address inputs to the supply-rail levels needed to drive the CMOS switches, eliminating the need for a VL supply.

Pin Description: ADG1608BRUZ Pin Definition and Functions
Pin Name Type Function
1 S1 Analog I/O Source 1 input/output
2 S2 Analog I/O Source 2 input/output
3 S3 Analog I/O Source 3 input/output
4 S4 Analog I/O Source 4 input/output
5 EN Input Enable (active high)
6 A2 Input Address bit 2 (MSB)
7 GND Ground Ground
8 VDD Power Positive supply
9 VSS Power Negative supply
10 A0 Input Address bit 0 (LSB)
11 A1 Input Address bit 1
12-15 S5-S8 Analog I/O Source 5-8 inputs/outputs
16 D Analog I/O Drain (common output)
Application Scenarios: In which products and applications is ADG1608BRUZ used
  • Data acquisition systems requiring low-distortion 8-channel multiplexing
  • Audio signal routing with 0.04% THD+N in mixing consoles
  • Medical instrumentation and patient monitoring with 470mA current handling
  • Automatic test equipment and relay replacement with break-before-make switching
Alternative Models: What chips are recommended as replacements for ADG1608BRUZ
Manufacturer Part Number Package Notes
ADI ADG1608BCPZ-REEL7 LFCSP-16 Smaller 3x3mm package
Vishay DG408LEDQ-GE3 TSSOP-16 Direct alternative, higher RON
Maxim MAX4617CUD+ TSSOP-16 8:1 mux, similar spec
TI MUX36S08IRTVR TSSOP-16 Low leakage, precision

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1